Color Matching (No Color Matching); Changing The Black Finish - Oki Pro1040 User Manual

Color Matching
(No Color Matching)
Prints using the specified colors as is, without
implementing color matching using the printer
drivers or device.
Select if implementing color matching using an
application.
„ Windows PS Printer Driver
1
Open the file to be printed.
2
On the [File] menu, select [Print].
3
Select [Pro1050 PS], and then click
[Preferences].
4
On the [Color] tab, click [Color], then
select [No Color Matching], and then
click [OK].
5
Print.

Changing the Black Finish

The finish for the black parts will be changed
when printing in color. This can be used when
the printer driver's color mode setting is [Simple
Adjustment] or [Graphic Pro].
„ Setup Items
z Black Finish
z Auto
Creates black using the optimum
methods according to the document to
be printed. This setting can be selected
only when the color mode is set to
[Simple Adjustment]. This setting
cannot be configured on the Graphic
Pro.
z Composite Black(CMYK)
Synthesizes black using cyan,
magenta, yellow, and black toner.
The black is close to brown. Ideal for
photos.
z True Black (K)
Prints black using black toner only.
Ideal for diagrams and documents.
When printing photos, the dark parts
are blackish.
z Pure Black Text/Graphics (Graphic Pro Only)
If black defined using the RGB color space
for text and graphics (R=0, G=0, B=0) or
black defined using the CMYK color space
(C=0, M=0, Y=0, K=100%) is specified,
this setting specifies whether printing
should use black (K) toner only.
z ON
Prints the text and graphics specified
as black using black (K) toner only.
z OFF
Text and graphics specified as black
are synthesized using either black (K)
toner only or CMYK depending on the
profile specified by color matching.
- 59 -
Adjusting Color with a Printer Driver