Page 1
TECH TIPS Service Call: Control Cable connectors at the Platform have been damaged Tools Needed: Side Cutters Wire Strippers Crimper Tool (Genie PN# 61794) Deutsch Plug Connector Kits PN# 105328 and 105329 Model: GS Scissors...
Page 2
Tech Tips Safety Rules Danger Failure to obey the instructions and safety rules in the appropriate Operator's Manual and Service Manual for your machine will result in death or serious injury. Many of the hazards identified in the operator’s manual are also safety hazards when maintenance and repair procedures are performed.
Page 3
In these instances, we strongly recommend that maintenance and repair be performed at an authorized Genie dealer service center. Safety Rules Danger Failure to obey the instructions and safety rules in this Tech Tip and the appropriate Service and Operator's Manual on your machine will result in death or serious injury.
Page 4
TECH TIPS Step 1 Locate wires from the connectors located under the platform assembly. Step 2 Use the following Kit PN# 105328 to repair the control cable on the chassis side.
Page 5
TECH TIPS Step 3 Use the following Kit PN# 105329 to repair the control cable on the Platform control side. Step 4 This illustration shows the terminal locations in the Deutsch connectors that correspond to the colors of the designated cables...