Table of Contents
Advertisement
CO Line Programming
[460] ISDN Call Hold
Description
Enables or disables to allow the ISDN Call Hold service.
Selection
• Port number: 1 through 3
• Enable/Disable
Default
All ports — Disable
Programming
1.
Enter 460.
Display: ISDN Call Hold
2.
Press NEXT.
Display: Port NO?
3.
Enter a port number.
To enter a first port number, you can also press NEXT.
Display example: #1 :Disable
4.
Keep pressing SELECT until the desired selection is displayed.
5.
Press STORE.
6.
To program another port, press NEXT or PREV, or SELECT and enter the desired port
number.
7.
Repeat steps 4 through 6.
8.
Press END.
Conditions
• Unless this setting is enabled, you can enjoy neither the ISDN Call Transfer service nor
ISDN Conference service.
• If you change this setting, be sure to restart the system. Refer to 2.11.1 System Restart in
Installation Manual.
Features Guide References
Integrated Services Digital Network (ISDN) Call Hold
Integrated Services Digital Network (ISDN) Call Transfer
Integrated Services Digital Network (ISDN) Conference
174
Programming Guide
Advertisement
Table of Contents
