Toyota GR Supra Owner's Manual page 316

316
6-1. MOBILITY
ing starting aid terminal of the
vehicle to be started.
4
Attach one terminal clamp of
the negative jumper cable to
the negative terminal of the
battery, or to the correspond-
ing engine or body ground of
assisting vehicle.
5
Attach the second terminal
clamp to the negative termi-
nal of the battery, or to the
corresponding engine or
body ground of the vehicle to
be started.
Starting the engine
Never use spray fluids to start
the engine.
1
Start the engine of the assist-
ing vehicle and let it run for
several minutes at an
increased idle speed.
2
Start the engine of the vehicle
that is to be started in the
usual way.
If the first starting attempt is not
successful, wait a few minutes
before making another attempt in
order to allow the discharged bat-
tery to recharge.
3
Let both engines run for sev-
eral minutes.
4
Disconnect the jumper
cables in the reverse order.
Check the battery and recharge,
if needed.
Supra Owner's Manual
Tow-starting and towing
Safety information
WARNING
Due to system limits, individual
functions can malfunction during
tow-starting/towing with the Toy-
ota Supra Safety systems acti-
vated. There is a risk of an
accident. Switch all Toyota Supra
Safety systems off prior to
tow-starting/towing.
Transporting the vehicle
General information
The vehicle is not permitted to
be towed.
Safety information
NOTICE
The vehicle can be damaged
when towing the vehicle with a
single lifted axle. There is a risk of
damage to property. The vehicle
should only be transported on a
loading platform.
NOTICE
The vehicle can become dam-
aged when lifting and securing it.
There is a risk of damage to prop-
erty.
● Lift the vehicle using suitable
means.
● Do not lift or secure the vehicle
by its tow fitting, body parts, or
suspension parts.