Toyota GT86 Owner's Manual

page of 465

/ 465
Contents
Table of Contents
Bookmarks

Table of Contents

Quick Links

Before Driving

When driving

Interior features

Maintenance and

care

When trouble

arises

Vehicle specifi-

cations

Index

Adjusting and operating features such as door locks,

mirrors, and steering column.

Driving, stopping and safe-driving information.

Air conditioning and audio systems, as well as other in-

terior features for a comfortable driving experience.

Cleaning and protecting your vehicle, performing do-it-

yourself maintenance, and maintenance information.

What To Do If the vehicle needs to be towed, gets a flat

tire, or is involved in an accident.

Detailed vehicle information.

Alphabetical listing of information contained in this man-

ual.

Table of Contents

Summary of Contents for Toyota GT86

Page 1 TABLE OF CONTENTS Adjusting and operating features such as door locks, Before driving mirrors, and steering column. When driving Driving, stopping and safe-driving information. Air conditioning and audio systems, as well as other in- Interior features terior features for a comfortable driving experience. Maintenance and Cleaning and protecting your vehicle, performing do-it- care...
Page 2: Table Of Contents
TABLE OF CONTENTS Index 1-6. Theft deterrent system Before driving Engine immobilizer system........ 91 Double locking system ..100 1-1. Key information Keys........30 1-7. Safety information Correct driving posture..102 1-2. Opening, closing and SRS airbag locking the doors and (Supplemental Restraint trunk System airbag)....
Page 3: Table Of Contents
2-2. Instrument cluster 3-2. Using the audio system Gauges and meters .... 194 Using the AUX/ USB port ......258 Indicators and warning lights ......... 198 3-3. Using the interior lights Multi-information display ......203 Interior lights list ....259 •...
Page 4: Table Of Contents
TABLE OF CONTENTS Index Maintenance and care When trouble arises 4-1. Maintenance and care 5-1. Essential information Cleaning and protecting Emergency flashers ... 362 the vehicle exterior ..... 282 If your vehicle needs to Cleaning and protecting be towed ......363 the vehicle interior ....
Page 5: Table Of Contents
If your vehicle overheats..423 If the vehicle becomes stuck ......... 426 If your vehicle has to be stopped in an emergency ....428 Vehicle specifications 6-1. Specifications Maintenance data (fuel, oil level, etc.).... 432 Fuel information ....445 6-2. Customization Customizable features ..
Page 6: Table Of Contents
Pictorial index Exterior Daytime running lights (vehicle with Headlights (high beam) P. 208 discharge headlights) P. 208 Front position lights P. 208 Headlights (low beam) P. 208 Windshield wipers P. 217 Outside rear view mirrors P. 80 Hood P. 297 Turn signal lights P.
Page 7: Table Of Contents
Trunk P. 58 Rear window defogger P. 256 Turn signal lights P. 191 Fuel filler door P. 87 Doors P. 55 Tail lights P. 208 Rear fog light P. 215 Tires Rotation P. 314 Replacement P. 384 License plate lights P.
Page 8: Table Of Contents
Interior Pictorial index (Left-hand drive vehicles) Head restraints P. 69 Seat belts P. 71 SRS curtain shield airbags P. 104 Child restraint SRS front passenger anchor brackets airbag P. 104 P. 141   Power outlet Cup holders P. 264 Console tray P.
Page 9 Sun visors P. 266 Interior light P. 260  Vanity mirrors P. 267 Anti-glare inside rear view mirror P. 79  : If equipped : NEVER use a rearward facing child restraint on a seat protected by an ACTIVE AIRBAG in front of it, DEATH or SERIOUS INJURY to the CHILD can occur.
Page 10 Interior Pictorial index (Left-hand drive vehicles) Inside door lock buttons P. 56  Outside rear view mirror switches P. 80 Door lock switch P. 56 Power window switches P. 83 Window lock switch P. 83...
Page 11 Shift lever P. 181, 188  Shift lock override button P. 412 Parking brake lever P. 192  Seat heater switches P. 273 Power outlet P. 271 “VSC SPORT” switch P. 226  Driving pattern selector switch P. 183 VSC/TRC off switch P.
Page 12: Instrument Panel
Instrument panel Pictorial index (Left-hand drive vehicles) Gauges and meters P. 194 Multi-information display P. 203 Headlight switch P. 208 Windshield wiper and washer switch P. 217 Turn signal lever P. 191 Fog light switch P. 215 Clock P. 268 Emergency flasher switch P.
Page 13 Vehicles with a manual air conditioning system Rear window and outside rear view mirror defoggers Air conditioning   switch /rear window defogger switch P. 256 system P. 240 Vehicles with an automatic air conditioning system Air conditioning Rear window and outside rear view system P.
Page 14 Instrument panel Pictorial index (Left-hand drive vehicles)  Paddle shift switches P. 184, 186 Engine (ignition) switch (vehicles without a smart entry & start system) P. 178  Horn P. 193 Cruise control switch P. 220 SRS driver airbag P. 104 Instrument panel light control dial P.
Page 15 Interior Pictorial index (Right-hand drive vehicles) Head restraints P. 69 SRS front passenger Child restraint anchor brackets airbag P. 104 SRS curtain shield P. 141 airbags P. 104 Seat belts P. 71  Power outlet  Cup holders P. 264 P.
Page 16 Interior Pictorial index (Right-hand drive vehicles) Interior light P. 260 Sun visors P. 266 Anti-glare inside rear view mirror P. 79  Vanity mirrors P. 267 : NEVER use a rearward facing child restraint on a seat protected by an ACTIVE AIRBAG in front of it, DEATH or SERIOUS INJURY to the CHILD can occur.
Page 17 Inside door lock buttons P. 56  Outside rear view mirror switches P. 80 Window lock switch P. 83 Power window switches P. 83 Door lock switch P. 56  : If equipped...
Page 18 Interior Pictorial index (Right-hand drive vehicles) Shift lever P. 181, 188  Shift lock override button P. 412 Parking brake lever P. 192  Seat heater switches P. 273 Power outlet P. 271 VSC/TRC off switch P. 226  Driving pattern selector switch P.
Page 19 Instrument panel Pictorial index (Right-hand drive vehicles) Gauges and meters P. 194 Multi-information display P. 203 Headlight switch P. 208 Turn signal lever P. 191 Windshield wiper and Fog light switch P. 215 washer switch P. 217 Emergency flasher switch P.
Page 20 Instrument panel Pictorial index (Right-hand drive vehicles) Vehicles with a manual air conditioning system Air conditioning Rear window and outside rear view mirror defoggers   system P. 240 switch /rear window defogger switch P. 256 Vehicles with an automatic air conditioning system Rear window and outside rear view Air conditioning mirror defoggers switch...
Page 21  Paddle shift switches P. 184, 186 Engine (ignition) switch (vehicles without a smart entry & start system) P. 178  Horn P. 193 Cruise control switch P. 220 SRS driver airbag P. 104 Tire pressure warning system reset switch P.
Page 22: For Your Information
Accessories, spare parts and modification of your Toyota A wide variety of non genuine spare parts and accessories for Toyota vehi- cles are currently available in the market. Using these spare parts and...
Page 23  SRS airbag system  Seat belt pretensioner system Be sure to check with any authorized Toyota dealer or repairer, or another duly qualified and equipped professional for precautionary measures or spe- cial instructions regarding installation of an RF-transmitter system.
Page 24 EDR.  Disclosure of the EDR data Toyota will not disclose the data recorded in an EDR to a third party except when: • An agreement from the vehicle’s owner (or the lessee for a leased vehicle) is obtained •...
Page 25 Scrapping your Toyota The SRS airbag and seat belt pretensioner devices in your Toyota contain explosive chemicals. If the vehicle is scrapped with the airbags and seat belt pretensioners left as they are, this may cause an accident such as fire. Be...
Page 26 Your vehicle contains batteries and/or accumulators. Do not discard them into the environment but cooperate with separate collection (Directive 2006/66/ EC).
Page 27 This is a warning against something which, if ignored, may cause damage to the vehicle or its equipment. You are informed about what you must or must not do in order to avoid or reduce the risk of damage to your Toyota and its equipment.
Page 29 Before driving 1-1. Key information 1-4. Opening and closing the windows Keys........30 Power windows....83 1-2. Opening, closing and locking the doors and 1-5. Refueling trunk Opening the fuel tank cap........87 Smart entry & start system ......33 1-6.
Page 30: Keys
1-1. Key information Keys The following keys are provided with the vehicle. Vehicles without a smart entry & start system Keys (with wireless remote control function) Operating the wireless remote control function (P. 51) Key (without a wireless remote control function) Key number plate Vehicles with a smart entry &...
Page 31 (without a smart entry & start system) or mechanical key (with a smart entry & start system) is lost, a new key can be made by any authorized Toyota dealer or repairer, or another duly qualified and equipped professional, using the key number plate.
Page 32 In case of a smart entry & start system malfunction or other key-related problems (vehicles with a smart entry & start system) Take your vehicle with all the electronic keys provided with your vehicle to any authorized Toyota dealer or repairer, or another duly qualified and equipped professional. ...
Page 33: Smart Entry & Start System
1-2. Opening, closing and locking the doors and trunk  Smart entry & start system The following operations can be performed simply by carrying the electronic key on your person, for example in your pocket. (The driver should always carry the electronic key.) Electronic key Electronic key Electronic key...
Page 34 1-2. Opening, closing and locking the doors and trunk Unlocking and locking the doors Vehicles without double lock- ing system Grip the handle to unlock the doors. Vehicles with double locking system Grip the driver’s door handle to unlock the door. Grip the passen- ger’s door handle to unlock all the doors.
Page 35 1-2. Opening, closing and locking the doors and trunk Unlocking the trunk Press the button to unlock the trunk. Antenna location and effective range  Antenna location Antennas outside the cabin Antennas inside the cabin Antenna outside the trunk Antenna inside the trunk...
Page 36 1-2. Opening, closing and locking the doors and trunk  Effective range (areas within which the electronic key is detected) When locking or unlocking the doors The system can be operated when the electronic key is within about 0.4 - 0.8 m (1.3 - 2.6 ft.) of either of the outside door handles.
Page 37 1-2. Opening, closing and locking the doors and trunk  Operation signals The emergency flashers flash to indicate that the doors have been locked/ unlocked. (Locked: once; Unlocked: twice)  When the door cannot be locked by the lock sensor Use your palm to touch the lock sensor.
Page 38 1-2. Opening, closing and locking the doors and trunk Alarm Situation Correction procedure An attempt was made to Retrieve the elec- lock the doors using the tronic key from the smart entry & start system vehicle and lock the Exterior alarm while the electronic key doors again.
Page 39 1-2. Opening, closing and locking the doors and trunk  Battery-saving function The battery-saving function will be activated in order to prevent the elec- tronic key battery and the vehicle battery from being discharged while the vehicle is not in operation for a long time. ...
Page 40 1-2. Opening, closing and locking the doors and trunk  Conditions affecting operation The smart entry & start system uses weak radio waves. In the following situ- ations, the communication between the electronic key and the vehicle may be affected, preventing the smart entry & start system, wireless remote con- trol and engine immobilizer system from operating properly.
Page 41 1-2. Opening, closing and locking the doors and trunk  Notes for the entry function  Even when the electronic key is within the effective range (detection areas), the system may not operate properly in the following cases: • The electronic key is too close to the window or outside door handle, near the ground, or in a high place when the doors are locked or unlocked.
Page 42 1-2. Opening, closing and locking the doors and trunk  Notes for locking the doors  Touching the door lock sensor while wearing gloves may delay or prevent lock operation. Remove the gloves and touch the lock sensor again.  Vehicles without a double locking system: When the lock operation is performed using the lock sensor, recognition signals will be shown up to two consecutive times.
Page 43 1-2. Opening, closing and locking the doors and trunk  When the vehicle is not driven for extended periods  To prevent theft of the vehicle, do not leave the electronic key within 2 m (6 ft.) of the vehicle. ...
Page 44 Stopping the engine: P. 417   Customization that can be configured at any authorized Toyota dealer or repairer, or another duly qualified and equipped professional Settings (e. g. smart entry & start system) can be changed. (Customizable features: P. 447)
Page 45 1-2. Opening, closing and locking the doors and trunk  Certification for smart entry & start system...
Page 46 1-2. Opening, closing and locking the doors and trunk...
Page 47 1-2. Opening, closing and locking the doors and trunk...
Page 48 1-2. Opening, closing and locking the doors and trunk -Replace only with the same or equivalent type recommended by the manufacturer. -Dispose of used batterites according to the local laws.
Page 49 1-2. Opening, closing and locking the doors and trunk...
Page 50 (P. 35) The radio waves may affect the operation of such devices. If necessary, the entry function can be disabled. Ask any authorized Toyota dealer or repairer, or another duly qualified and equipped professional for details, such as the frequency of radio waves and timing of the emitted radio waves.
Page 51: Wireless Remote Control
1-2. Opening, closing and locking the doors and trunk Wireless remote control The wireless remote control can be used to lock and unlock the vehi- cle. Vehicles without a smart entry & start system Locks both side doors Locks driver’s door Unlocks both side doors Pressing the button unlocks the driver’s door.
Page 52 1-2. Opening, closing and locking the doors and trunk  Operation signals The emergency flashers flash to indicate that the doors have been locked/ unlocked. (Locked: Once; Unlocked: Twice)  Door lock buzzer (vehicles with a smart entry & start system) If an attempt to lock the doors is made when a door is not fully closed, a buzzer sounds continuously.
Page 53 Confirmation of the registered key number (vehicles with a smart entry & start system) The number of keys already registered to the vehicle can be confirmed. Ask any authorized Toyota dealer or repairer, or another duly qualified and equipped professional for details. ...
Page 54 1-2. Opening, closing and locking the doors and trunk  Certification for wireless remote control -Replace only with the same or equivalent type recommended by the manufacturer. -Dispose of used batterites according to the local laws.
Page 55: Doors
1-2. Opening, closing and locking the doors and trunk Doors The vehicle can be locked and unlocked using the entry function, wireless remote control, key or door lock switch.  Entry function (vehicles with a smart entry & start system) ...
Page 56 1-2. Opening, closing and locking the doors and trunk  Door lock switch Locks both side doors Unlocks both side doors  Inside lock button Locks the door Unlocks the door Locking the doors from the outside without a key STEP Move the inside lock button to the lock position.
Page 57 1-2. Opening, closing and locking the doors and trunk  Window open/close function linked to door operation In order to make opening and closing the doors easier, completely closed windows are linked to door operations. Therefore, when a door is opened, its window opens slightly.
Page 58: Trunk
1-2. Opening, closing and locking the doors and trunk Trunk The trunk can be opened using the key, trunk opener, entry function or wireless remote control.  Opening the trunk from inside the vehicle Press and hold the opener switch to release the trunk lid. ...
Page 59 1-2. Opening, closing and locking the doors and trunk  Trunk light The trunk light turns on when the trunk is opened.  Function to prevent the trunk being locked with the electronic key inside (vehicles with a smart entry & start system) ...
Page 60 1-2. Opening, closing and locking the doors and trunk CAUTION  Caution while driving  Keep the trunk lid closed while driving. If the trunk lid is left open, it may hit near-by objects while driving or lug- gage in the trunk may be unexpectedly thrown out, causing an accident. In addition, exhaust gases may enter the vehicle, causing death or a seri- ous health hazard.
Page 61  Do not attach any accessories other than genuine Toyota parts to the trunk lid. Such additional weight on the trunk lid may cause the lid to suddenly shut again after it is opened.
Page 62  Do not touch damper stay rods with gloves or other fabric items.  Do not attach any accessories other than genuine Toyota parts to the trunk lid.  Do not apply lateral force to damper stays or place your hand on it.
Page 63: Steering Wheel Front Seats
1-3. Adjustable components (seats, mirrors, steering wheel) Front seats Seat position adjustment lever Seatback angle adjustment lever Vertical height adjustment lever (driver’s side only) Seatback fold strap equipped)
Page 64 1-3. Adjustable components (seats, mirrors, steering wheel) Getting in and out of the rear seats To get in and out of the rear seats, use the seatback angle adjust- ment lever or seatback fold strap.  Before getting in or out of the rear seats Release the seat belt from the seat belt guide.
Page 65 1-3. Adjustable components (seats, mirrors, steering wheel)  Getting out of the rear seats Driver’s side (if equipped) Pull the seatback fold strap. The seatback will fold forward. Passenger’s side Pull the seatback fold strap. The seatback will fold forward. The seat can be slid forward and backward.
Page 66 1-3. Adjustable components (seats, mirrors, steering wheel) CAUTION  Seat adjustment  To reduce the risk of sliding under the lap belt during a collision, do not recline the seat more than necessary. If the seat is too reclined, the lap belt may slide past the hips and apply restraint forces directly to the abdomen, or your neck may contact the shoulder belt, increasing the risk of death or serious injury in the event of an accident.
Page 67: Rear Seats
1-3. Adjustable components (seats, mirrors, steering wheel) Rear seats The seatbacks of the rear seats can be folded down. Press seatback lock release buttons and fold the seatback down. Press the button until the lock is released. To return the seatbacks to its original position, lift it up until it locks.
Page 68 1-3. Adjustable components (seats, mirrors, steering wheel) CAUTION  After returning the rear seatback to the upright position Observe the following precautions. Failure to do so may result in death or serious injury.  Make sure that the seatback is securely locked in position by lightly pushing it back and forth.
Page 69: Head Restraints
1-3. Adjustable components (seats, mirrors, steering wheel) Head restraints Pull the head restraints up. Down Push the head restraint down while pushing the lock release button. Lock release button  Removing the head restraints Pull the head restraint up while pushing the lock release button.
Page 70 1-3. Adjustable components (seats, mirrors, steering wheel)  Adjusting the height of the head restraints Make sure that the head restraints are adjusted so that the center of the head restraint is closest to the top of your ears. CAUTION ...
Page 71: Seat Belts
1-3. Adjustable components (seats, mirrors, steering wheel) Seat belts Make sure that all occupants are wearing their seat belts before driv- ing the vehicle.  Correct use of the seat belts  Extend the shoulder belt so that it comes fully over the shoulder, does come into contact with the...
Page 72 1-3. Adjustable components (seats, mirrors, steering wheel) Front seat belt guide To enable the seat belt to be easily extended, pass the seat belt through the guide. When getting in or out of the rear seats, release the seat belt from the guide.
Page 73 Toyota dealer or repairer, or another duly qualified and equipped professional. When replacing seat belt retractor assemblies for the front seating positions, use only genuine Toyota parts equipped with a force limiter.
Page 74 Each seat belt should be used by one person only. Do not use a seat belt for more than one person at once, including children.  Toyota recommends that children be seated in the rear seat and always use a seat belt and/or an appropriate child restraint system. ...
Page 75 1-3. Adjustable components (seats, mirrors, steering wheel) CAUTION  Pregnant women Obtain medical advice and wear the seat belt in the proper way. (P. 71) Women who are pregnant should position the lap belt as low as possible over the hips in the same manner as other occu- pants.
Page 76 Ensure that the belt and plate are locked and the belt is not twisted. If the seat belt does not function correctly, immediately contact any autho- rized Toyota dealer or repairer, or another duly qualified and equipped pro- fessional. ...
Page 77 Do not attempt to install, remove, modify, disassemble or dispose of the seat belts. Have any necessary repairs carried out by any authorized Toyota dealer or repairer, or another duly qualified and equipped profes- sional. Inappropriate handling of the pretensioner may prevent it from operating properly, resulting in death or serious injury.
Page 78: Steering Wheel
1-3. Adjustable components (seats, mirrors, steering wheel) Steering wheel The steering wheel can be adjusted to a comfortable position. Hold the steering wheel and STEP push the lever down. Adjust to the ideal position by STEP moving the steering wheel horizontally and vertically.
Page 79: Anti-Glare Inside Rear View Mirror
1-3. Adjustable components (seats, mirrors, steering wheel) Anti-glare inside rear view mirror The rear view mirror’s position can be adjusted to enable sufficient confirmation of the rear view in accordance with the driver's seating posture. Adjusting the height of rear view mirror Adjust the height of the rear view mirror by moving it up and down.
Page 80: Outside Rear View Mirrors
1-3. Adjustable components (seats, mirrors, steering wheel) Outside rear view mirrors Mirror angle can be adjusted using the switch. Select a mirror to adjust. STEP Left Right Adjust the mirror. STEP Right Down Left...
Page 81 1-3. Adjustable components (seats, mirrors, steering wheel) Folding the mirrors Manual operation Push the mirror back in the direc- tion of the vehicle’s rear. Power operation (if equipped) Press the switch to fold the mir- rors. Press it again to extend them to the original position.
Page 82 1-3. Adjustable components (seats, mirrors, steering wheel) CAUTION  When driving the vehicle Observe the following precautions while driving. Failure to do so may result in loss of control of the vehicle and cause an accident, resulting in death or serious injury. ...
Page 83: The Windows Power Windows
1-4. Opening and closing the windows Power windows The power windows can be opened and closed using the switches. Operating the switch moves the windows as follows: Closing One-touch closing Opening One-touch opening Pushing the switch in the opposite direction will stop win- dow travel partway.
Page 84 1-4. Opening and closing the windows  The power windows can be operated when Vehicles without a smart entry & start system The engine switch is in the “ON” position. Vehicles with a smart entry & start system The “ENGINE START STOP” switch is in IGNITION ON mode. ...
Page 85 If the window continues to close but then re-open slightly even after performing the above procedure correctly, have the vehicle inspected by any authorized Toyota dealer or repairer, or another duly qualified and equipped professional.
Page 86 1-4. Opening and closing the windows CAUTION  Closing the windows Observe the following precautions. Failure to do so may result in death or serious injury.  The driver is responsible for all the power window operations, including the operation for the passengers. In order to prevent accidental operation, especially by a child, do not let a child operate the power windows.
Page 87: Opening The Fuel Tank Cap
1-5. Refueling Opening the fuel tank cap Perform the following steps to open the fuel tank cap:  Before refueling the vehicle  Vehicles without a smart entry & start system: Turn the engine switch off and ensure that all the doors and windows are closed.
Page 88  Use of ethanol blended gasoline in a gasoline engine Toyota allows the use of ethanol blended gasoline where the ethanol content is up to 10%. Make sure that the ethanol blended gasoline to be used has a Research Octane Number that follows the above.
Page 89 1-5. Refueling CAUTION  Refueling the vehicle Observe the following precautions while refueling the vehicle. Failure to do so may result in death or serious injury.  Do not handle fuel indoors.  After exiting the vehicle and before opening the fuel door, touch an unpainted metal surface to discharge any static electricity.
Page 90  When replacing the fuel cap Do not use anything but a genuine Toyota fuel tank cap designed for your vehicle. Doing so may cause a fire or other incident which may result in death or serious injury.
Page 91: System
1-6. Theft deterrent system Engine immobilizer system The vehicle's keys have built-in transponder chips that prevent the engine from starting if the key has not been previously registered in the vehicle's on-board computer. Never leave the keys inside the vehicle when you leave the vehicle. This system is designed to help prevent vehicle theft but does not guarantee absolute security against all vehicle thefts.
Page 92 1-6. Theft deterrent system Vehicles with a smart entry & start system The indicator light flashes after the “ENGINE START STOP” switch has been turned off to indicate that the system is operating. The indicator light stops flash- ing after the “ENGINE START STOP”...
Page 93 1-6. Theft deterrent system  Certification for engine immobilizer system (vehicles with a smart entry & start system)
Page 94 1-6. Theft deterrent system...
Page 95 1-6. Theft deterrent system...
Page 96 1-6. Theft deterrent system...
Page 97 1-6. Theft deterrent system  Certification for engine immobilizer system (vehicles without a smart entry & start system)
Page 98 1-6. Theft deterrent system...
Page 99 1-6. Theft deterrent system NOTICE  To ensure the system operates correctly Do not modify or remove the system. If modified or removed, the proper operation of the system cannot be guaranteed.
Page 100: Double Locking System
1-6. Theft deterrent system  Double locking system Unauthorized access to the vehicle is prevented by disabling the door unlocking function from both the interior and exterior of the vehicle. Vehicles employing this sys- tem have labels on the win- dow glass of both front doors.
Page 101 1-6. Theft deterrent system CAUTION  Double locking system precaution Never activate the double locking system when there are people in the vehi- cle because all the doors cannot be opened from inside the vehicle.
Page 102: Safety Information Correct Driving Posture
1-7. Safety information Correct driving posture Drive with a good posture as follows: Sit upright and well back in the seat. (P. 63) Adjust the position of the seat forward or backward to ensure the pedals can be reached easily depressed to the extent required.
Page 103 1-7. Safety information CAUTION  While driving  Do not adjust the position of the driver's seat. Doing so could cause the driver to lose control of the vehicle.  Do not place a cushion between the driver or passenger and the seatback. A cushion may prevent correct posture from being achieved, and reduce the effectiveness of the seat belt and head restraint, increasing the risk of death or serious injury to the driver or passenger.
Page 104 1-7. Safety information SRS airbag (Supplemental Restraint System airbag) The SRS airbags inflate when the vehicle is subjected to certain types of severe impacts that may cause significant injury to the occupants. They work together with the seat belts to help reduce the risk of death or serious injury.
Page 105 1-7. Safety information Front airbags for driver and front passenger Knee airbag for driver Side airbags for driver and front passenger Curtain shield airbags for driver, front passenger and window- side rear passengers These SRS airbags are designed only as a supplement to the pri- mary protection provided by the seat belt.
Page 106 1-7. Safety information CAUTION  SRS airbag  To obtain maximum protection in the event of an accident, the driver and all passengers in the vehicle should always wear seat belts when the vehi- cle is moving. The SRS airbag is designed only to be a supplement to the primary protection provided by the seat belt.
Page 107 1-7. Safety information CAUTION  SRS airbag  Put children in the REAR seat properly restrained at all times in a child restraint device or in a seat belt, whichever is appropriate for the child’s age, height and weight. The SRS airbag deploys with considerable speed and force and can injure or even kill children, espe- cially if they are not restrained or...
Page 108 1-7. Safety information NOTICE  When the SRS airbag deploys When the SRS airbag deploys, some smoke will be released. This smoke could cause breathing problems for people with a history of asthma or other breathing trouble. If you or your passengers have breathing problems after SRS airbag deploys, get fresh air promptly.
Page 109 1-7. Safety information SRS airbag system components Front sub sensor (right-hand Side airbag sensor (center side) pillar right-hand side) Front airbag module (driver's Curtain shield airbag sensor side) (rear wheel house right-hand side) Front passenger’s front air- Seat belt pretensioner (front bag ON and OFF indicator (center of instrument panel) passenger’s side)
Page 110 1-7. Safety information Door impact sensor (left- Front sub sensor (left-hand hand side) side) Driver’s knee airbag module Curtain shield airbag mod- ule (left-hand side) Airbag control module (including impact sensors) The main SRS airbag system components are shown above. The SRS airbag system is controlled by the airbag control module.
Page 111 1-7. Safety information SRS front airbag The driver’s SRS front airbag is stowed in the center portion of the steering wheel. The driver’s knee airbag is stowed under the steering column. The passenger’s SRS front airbag is stowed near the top of the dashboard under an “SRS AIRBAG”...
Page 112 1-7. Safety information  Normal operation Airbag manual on-off switch Airbag system Front airbag for front passenger Activated Deactivated Seat belt pretensioner for front pas- senger Side air bag for front passenger Activated Activated Curtain shield air bag for front pas- senger SRS warning light Not illuminated...
Page 113 1-7. Safety information  Operation Driver's side SRS AIRBAGs deploy as soon as a collision occurs. After deployment, SRS AIRBAGs start to deflate immediately so that the driver’s vision is not obstructed. : Models with knee airbag Passenger’s side SRS AIRBAGs deploy as soon as a collision occurs.
Page 114 1-7. Safety information The SRS airbag can function only when the engine switch is in the “ON” position (vehicles without a smart entry & start system) or when the “ENGINE START STOP” switch is in IGNITION ON mode (vehicles with a smart entry &...
Page 115 1-7. Safety information The SRS front airbag (and also the knee airbag) is designed to deploy in the event of an accident involving a moderate to severe front collision. It is not designed to deploy in most lesser front impacts because the necessary pro- tection can be achieved by the seat belt alone.
Page 116 1-7. Safety information  When is the SRS front airbag unlikely to deploy? The vehicle strikes an object, such as a telephone pole or sign pole. The vehicle slides under the load bed of a truck. The vehicle sustains an oblique offset front impact.
Page 117 1-7. Safety information The vehicle strikes an object that can move or deform, such as a parked vehi- cle. There are many types of collisions which might not necessarily require SRS front airbag deployment. In the event of accidents like those illustrated, the SRS front airbag may not deploy depending on the level of accident forces involved.
Page 118 1-7. Safety information First impact Second impact In an accident where the vehicle is impacted more than once, the SRS front airbag deploys only once on the first impact. Example: In the case of a double colli- sion, first with another vehicle, then against a concrete wall in immediate suc- cession, once the SRS front airbag is activated on the first impact, it will not be...
Page 119 1-7. Safety information SRS side airbag and SRS curtain shield airbag The SRS side airbag is stored in the door side of each front seat seatback, which bears an “SRS AIRBAG” label. In a moderate to severe side impact collision, the SRS side airbag on the impacted side of the vehicle deploys between the occupant and the door panel and supplements the seat belt by reducing the impact on the occupant’s chest.
Page 120 1-7. Safety information The driver’s and front passenger’s SRS side airbags and SRS curtain shield airbags deploy independently of each other since each has its own impact sensor. Therefore, they may not both deploy in the same accident. Also, the SRS side airbag and SRS curtain shield airbag deploy independently of the driver’s and front passenger’s SRS front airbags in the steering wheel and instrument panel.
Page 121 1-7. Safety information When the SRS side airbag and SRS curtain shield airbag deploy, a sudden, fairly loud inflation noise will be heard and some smoke will be released. These occurrences are a normal result of the deployment. This smoke does not indicate a fire in the vehicle.
Page 122 1-7. Safety information The vehicle is involved in a side-on impact in an area outside the vicinity of the passenger compartment. The vehicle strikes a telephone pole or similar object. The vehicle is involved in a side-on impact from a motorcycle. The vehicle rolls onto its side or roof.
Page 123 1-7. Safety information  When will the SRS side airbag and SRS curtain shield airbag not deploy? The vehicle is involved in front collision with another vehicle (moving or station- ary). The vehicle is struck from behind. The SRS side airbag and SRS curtain shield airbag are not designed to deploy in most cases if the vehicle is involved in a front collision or is struck from behind.
Page 124 When to contact any authorized Toyota dealer or repairer, or another duly qualified and equipped professional In the following cases, the vehicle will require inspection and/or repair. Con- tact any authorized Toyota dealer or repairer, or another duly qualified and equipped professional as soon as possible. ...
Page 125 1-7. Safety information  The portion of the front pillars, rear pil- lars or roof side rail garnishes (padding) containing the curtain shield airbags inside is scratched, cracked or other- wise damaged. CAUTION  If the SRS airbags deploy Do not touch the SRS side airbag system components around the front seat seatback with bare hands right after deployment.
Page 126 An infant or child who is too small to use a seat belt should be properly secured using a child restraint sys- tem. Toyota strongly recommends that all infants and children be placed in the rear seats of the vehicle and properly restrained. The rear seats are safer for infants and children than the front passenger seat.
Page 127 1-7. Safety information CAUTION  SRS airbag precautions  Do not allow a child to stand in front of the SRS front passenger airbag unit or sit on the knees of a front passenger.  Do not allow the front seat occupants to hold items on their knees.
Page 128 1-7. Safety information CAUTION  SRS airbag precautions  Do not attach anything to areas such as a door, windshield glass, side door glass, rear quarter glass, front or rear pillar, roof side rail and assist grip. (Except for the speed limit label P.
Page 129 If the areas where the SRS airbags are stored, such as the steering wheel pad and front and rear pillar garnishes, are damaged or cracked, have them replaced by any authorized Toyota dealer or repairer, or another duly qualified and equipped professional.
Page 130 1-7. Safety information SRS airbag system monitor  SRS warning light A diagnostic system continually monitors the readiness of the SRS airbag system (including front seat belt pretensioners) while the vehicle is being driven. The SRS warning light will show normal system operation by illu- minating for approximately 6 seconds when the engine switch...
Page 131 1-7. Safety information  Side airbag sensor • Center pillar right-hand side • Center pillar left-hand side  Side airbag module • Driver’s side • Front passenger’s side  Curtain shield airbag sensor • Rear wheel house right-hand side • Rear wheel house left-hand side ...
Page 132 SRS airbag system. We recommend that you have the system checked immediately by your nearest any authorized Toyota dealer or repairer, or another duly qualified and equipped professional. Unless checked and properly repaired, the seat belt pretensioners and/or SRS airbags will operate improperly (e.g.
Page 133: Child Restraint Systems
Toyota dealer or repairer, or another duly qualified and equipped professional for the child restraint system installation.  Toyota recommends that you use a child restraint system which conforms to the regulation “ECE No.44”. Types of child restraints Child restraint systems are classified into the following 5 groups according to the regulation ECE No.44:...
Page 134 1-7. Safety information Baby seat Equal to Group 0 and 0 of ECE No.44 Child seat Equal to Group 0 and I of ECE No.44 Junior seat Equal to Group II and III of ECE No.44...
Page 135 1-7. Safety information Child restraint system suitability for various seating positions Provided information in the table shows your child restraint system suitability for various seating positions. Front passenger seat Seating position Airbag manual on-off Rear seat switch Mass groups 0 (up to 10 kg [22 lb.]) L3, L4 Never put (up to 13 kg [28 lb.])
Page 136 Suitable for “universal” category child restraint system approved for the use in this mass group. L1: Suitable for “TOYOTA DUO+” (9 to 18 kg [20 to 39 lb.]) approved for the use in this mass group. L2: Suitable for “TOYOTA KID FIX” (15 to 36 kg [34 to 79 lb.]) approved for the use in this mass group.
Page 137 1-7. Safety information Child restraint system suitability for various seating positions (with ISOFIX rigid anchors) Provided information in the table shows your child restraint system suitability for various seating positions. Vehicle ISOFIX positions Size Mass groups Fixture class Rear seat ISO/L1 Carrycot ISO/L2...
Page 138 1-7. Safety information (1) For the CRS which do not carry the ISO/XX size class identifica- tion (A to G), for the applicable mass group, the car manufac- turer shall indicate the vehicle specific ISOFIX child restraint system(s) recommended for each position. Key of letters inserted in the above table: IUF: Suitable for ISOFIX forward child restraint systems of universal category approved for use in this mass group.
Page 139  Toyota strongly urges the use of a proper child restraint system that con- forms to the size of the child, installed on the rear seat. According to acci- dent statistics, the child is safer when properly restrained in the rear seat than in the front seat.
Page 140 1-7. Safety information CAUTION  Child restraint precautions  Never use a rear-facing child restraint system on the front passenger seat when the airbag manual on-off switch is on. (P. 151) In the event of an accident, the force of the rapid inflation of the front pas- senger airbag can cause death or serious injury to the child.
Page 141: Installing Child Restraints
1-7. Safety information Installing child restraints Follow the child restraint system manufacturer's instructions. Firmly secure child restraints to the rear seats using a seat belt or a ISOFIX rigid anchors. Attach the top strap when installing a child restraint. Installation with a seat belt ( ...
Page 142 1-7. Safety information Installing child restraints using a seat belt Rear facing Baby seat/child seat  Place the child restraint system STEP on the rear seat facing the rear of the vehicle. Run the seat belt through the STEP child restraint system and insert the plate into the buckle.
Page 143 1-7. Safety information Forward facing Child seat  Place the child restraint system STEP on the seat facing the front of the vehicle. Run the seat belt through the STEP child restraint system and insert the plate into the buckle. Make sure that the belt is not twisted.
Page 144 1-7. Safety information  Junior seat Place the child restraint system STEP on the seat facing the front of the vehicle. Sit the child in the child restraint STEP system. Fit the seat belt to the child restraint system and insert the plate into the buckle.
Page 145 1-7. Safety information Removing a child restraint installed with a seat belt Push the buckle release button and fully retract the seat belt. Installation with ISOFIX rigid anchor (ISOFIX child restraint system) Latch the buckles onto the exclu- sive fixing bars. If the child restraint has a top strap, the top strap should be latched onto the anchor bracket.
Page 146 1-7. Safety information Child restraint systems with a top strap STEP Secure the child restraint using a seat belt or ISOFIX rigid anchor. Remove the anchor bracket STEP cover. Store the removed cover in a safe place. Latch the hook onto the anchor STEP bracket and tighten the top strap.
Page 147 Follow the instructions provided by the manufacturer of the system. If your child restraint system does not provide a locking clip, you can purchase the following item from any authorized Toyota dealer or repairer, or another duly qualified and equipped professional.
Page 148 1-7. Safety information CAUTION  When installing a child restraint system Follow the directions given in the child restraint system installation manual and fix the child restraint system securely in place. If the child restraint system is not correctly fixed in place, the child or other passengers may be injured or even killed in the event of sudden braking, sudden swerving or an accident.
Page 149 1-7. Safety information CAUTION  When installing a child restraint system  Never use a rear-facing child restraint system on the front passenger seat when the airbag manual on-off switch is on. (P. 151) The force of the rapid inflation of the front passenger airbag can cause death or serious injury to children in the event of an accident.
Page 150 When installing a child restraint system  If child restraint system regulations exist in the country where you reside, please contact any authorized Toyota dealer or repairer, or another duly qualified and equipped professional for the child restraint system installa- tion.
Page 151: Airbag Manual On-Off System
1-7. Safety information Airbag manual on-off system This system deactivates the front passenger airbag. Only deactivate the airbags when using a child restraint system on the front passenger seat. Airbag manual on-off indica- Vehicles without a smart entry & start system This indicator light turns on when the airbag system is on (only when the engine switch is...
Page 152 1-7. Safety information Deactivating the front passenger airbag Vehicles without a smart entry & start system Insert the key into the cylinder and turn to the “OFF” position. The “OFF” indicator light turns on (only when the engine switch is in the “ON”...
Page 153 If any of the following problems occur, it is possible that there is a mal- function in the system. Have the vehicle inspected by any authorized Toyota dealer or repairer, or another duly qualified and equipped profes- sional. • Neither “ON” nor “OFF” comes on.
Page 154 1-7. Safety information...
Page 155 When driving 2-1. Driving procedures 2-3. Operating the lights and windshield wipers Driving the vehicle .... 156 Headlight switch....208 Engine (ignition) switch (vehicles with a smart Fog light switch ....215 entry & start system)..169 Windshield wipers and Engine (ignition) switch washer ......
Page 156: Driving Procedures Driving The Vehicle
2-1. Driving procedures Driving the vehicle The following procedures should be observed to ensure safe driv- ing:  Starting the engine P. 169, 178  Driving Vehicles with an automatic transmission STEP With the brake pedal depressed, shift the shift lever to D. (P.
Page 157 2-1. Driving procedures  Parking the vehicle Vehicles with an automatic transmission STEP With the shift lever in D, depress the brake pedal. STEP Shift the shift lever to P. (P. 181) STEP Set the parking brake. (P. 192) STEP Vehicles without a smart entry &...
Page 158 2-1. Driving procedures Starting off on a steep uphill Vehicles with an automatic transmission STEP Make sure that the parking brake is set and shift the shift lever to D. STEP Gently depress the accelerator pedal. STEP Release the parking brake. Vehicles with a manual transmission STEP With the parking brake firmly set and the clutch pedal fully...
Page 159 Have any autho- rized Toyota dealer or repairer, or another duly qualified and equipped professional perform the bedding down. ...
Page 160 2-1. Driving procedures  REV indicator (if equipped) When the set engine speed is reached the REV indicator comes on and a buzzer sounds to inform the driver. (P. 205) (When the engine speed enters the red zone, the REV indicator flashes regard- less of settings.) CAUTION ...
Page 161 Large amounts of exhaust in the vehicle can cause driver drowsiness and an accident, resulting in death or a serious health hazard. Have the vehicle inspected by any authorized Toyota dealer or repairer, or another duly qualified and equipped professional immedi- ately.
Page 162 2-1. Driving procedures CAUTION  Use engine braking (downshift) to maintain a safe speed when driving down a steep hill. Using the brakes continuously may cause the brakes to overheat and lose effectiveness. (P. 182, 188)  Do not adjust the position of the steering wheel, the seat, or the inside or outside rear view mirrors while driving.
Page 163 CAUTION  If you hear a squealing or scraping noise (brake pad wear indicators) Have the brake pads checked and replaced by any authorized Toyota dealer or repairer, or another duly qualified and equipped professional as soon as possible. Rotor damage may result if the pads are not replaced when needed.
Page 164 2-1. Driving procedures CAUTION  When the vehicle is parked  Do not leave glasses, cigarette lighters, spray cans, or soft drink cans in the vehicle when it is in the sun. Doing so may result in the following: • Gas may leak from a cigarette lighter or spray can, and may lead to a fire.
Page 165 Toyota dealer or repairer, or another duly qualified and equipped profes- sional. Failure to do so may allow exhaust gases to enter the vehicle, resulting in death or a serious health hazard.
Page 166 2-1. Driving procedures CAUTION  When braking  When the brakes are wet, drive more cautiously. Braking distance increases when the brakes are wet, and this may cause one side of the vehicle to brake differently than the other side. Also, the parking brake may not securely hold the vehicle.
Page 167 2-1. Driving procedures NOTICE  Pre-driving check Trapping small animals in the cooling fan and belts of the engine may result in a malfunction. Check that no small animal enters the engine compartment and under the vehicle before starting the engine. ...
Page 168 Engine damage caused by water immersion In the event that you drive on a flooded road and the vehicle is flooded, be sure to have any authorized Toyota dealer or repairer, or another duly quali- fied and equipped professional check the following: ...
Page 169: Smart Entry & Start System) P
2-1. Driving procedures Engine (ignition) switch (vehicles with a smart entry & start system) Performing the following operations when carrying the electronic key on your person starts the engine or changes “ENGINE START STOP” switch modes.  Starting the engine Vehicles with an automatic transmission STEP Check that the parking brake is set.
Page 170 2-1. Driving procedures Vehicles with a manual transmission STEP Check that the parking brake is set. STEP Check that the shift lever is set in N. STEP Firmly depress the clutch pedal. The smart entry & start system indicator light (green) will turn on. If the indicator light does not turn on, the engine cannot be started.
Page 171 2-1. Driving procedures  Stopping the engine Vehicles with an automatic transmission STEP Stop the vehicle. STEP Shift the shift lever to P. STEP Set the parking brake. (P. 192) STEP Release the brake pedal. STEP Press the “ENGINE START STOP” switch. STEP Check that the smart entry &...
Page 172 2-1. Driving procedures  Changing “ENGINE START STOP” switch mode Modes can be changed by pressing the “ENGINE START STOP” switch with the brake pedal (vehicles with an automatic transmis- sion) or clutch pedal (vehicles with a manual transmission) released. (The mode changes each time the switch is pressed.) Off* The emergency flashers can be used.
Page 173 2-1. Driving procedures When stopping the engine with the shift lever in a position other than P (vehicles with an automatic transmission) If the engine is stopped with the shift lever in a position other than P, the “ENGINE START STOP” switch will not be turned off but instead be turned to ACCESSORY mode.
Page 174  If the engine does not start The engine immobilizer system may not have been deactivated. (P. 91) Contact any authorized Toyota dealer or repairer, or another duly qualified and equipped professional. Vehicles with an automatic transmission: Check that the shift lever is securely set in P.
Page 175  When the smart entry & start system indicator light flashes in yellow The system may be malfunctioning. Have the vehicle inspected by any authorized Toyota dealer or repairer, or another duly qualified and equipped professional immediately.  If the electronic key battery is depleted P.
Page 176 2-1. Driving procedures CAUTION  When starting the engine  Always start the engine while sitting in the driver’s seat. Do not depress the accelerator pedal while starting the engine under any circumstances. Doing so may cause an accident resulting in death or serious injury. ...
Page 177 Do not race a cold engine.  If the engine becomes difficult to start or stalls frequently, have your vehi- cle checked by authorized Toyota dealer or repairer, or another duly quali- fied and equipped professional immediately.  Symptoms indicating a malfunction with the “ENGINE START STOP”...
Page 178 2-1. Driving procedures Engine (ignition) switch (vehicles without a smart entry & start system)  Starting the engine Vehicles with an automatic transmission STEP Check that the parking brake is set. STEP Check that the shift lever is set in P. STEP Firmly depress the brake pedal.
Page 179  If the engine does not start The engine immobilizer system may not have been deactivated. (P. 91) Contact any authorized Toyota dealer or repairer, or another duly qualified and equipped professional.  When the steering lock cannot be released When starting the engine, the engine switch may seem stuck in the “LOCK”...
Page 180 10 seconds or more.  Do not race a cold engine.  If the engine becomes difficult to start or stalls frequently, have your vehi- cle checked by any authorized Toyota dealer or repairer, or another duly qualified and equipped professional immediately.
Page 181: Automatic Transmission
2-1. Driving procedures  Automatic transmission Select a shift position appropriate for the driving conditions.  Shifting the shift lever Vehicles without a smart entry & start system While the engine switch is in the “ON” position, move the shift lever with the brake pedal depressed. When shifting the shift lever between P and D, make sure that the vehicle is completely stopped.
Page 182 2-1. Driving procedures  Shift position uses Shift position Meter display Function Parking the vehicle/starting the engine Reversing Neutral Normal D position driving (gears between “1” and “6” are automatically selected) Temporary manual mode driv- ing (P. 186) (paddle shift switches acti- vated) Manual mode driving (P.
Page 183 2-1. Driving procedures  Selecting a driving mode By pressing the driving pattern selector switch the following modes can be selected to suit driving and usage conditions: Normal mode Sport mode The “SPORT” indicator comes on. Use sport mode for sporty driving or when driving in mountainous regions with lots of curves.
Page 184 2-1. Driving procedures Manual mode driving To enter manual mode, shift the shift lever to the M position. When the Gear Shift Indicator is on, gears can be selected by operat- ing the shift lever or paddle shift switches (if equipped), allowing you to drive in the gear of your choosing.
Page 185 2-1. Driving procedures  When moving the shift lever out of P If the shift lever is pushed sideways before the brake pedal is depressed, shift lever operation may not be possible. Depress the brake pedal before shifting the shift lever out of P. ...
Page 186 2-1. Driving procedures  Automatic gear selection when the vehicle is stopped When the vehicle is idling at high rpm in order to warm up, and the vehicle is on a slippery road, the transmission may automatically shift to 2 gear for stopping and starting off.
Page 187 2-1. Driving procedures  AI-SHIFT The AI-SHIFT automatically shifts the gear to the suitable position according to the driver performance and driving conditions. The AI-SHIFT automatically operates when the shift lever is in the D posi- tion. (Operating the paddle shift switches or shifting the shift lever to the M position cancels the function.) CAUTION ...
Page 188: Manual Transmission
2-1. Driving procedures  Manual Transmission  Shifting the shift lever Fully depress the clutch pedal before operating the shift lever, and then release it slowly.  Shifting the shift lever to R Shift the shift lever to R while lifting up the ring section.
Page 189 2-1. Driving procedures Shift position indicator The selected shift position will be displayed on the multi-informa- tion display. The selected shift position will not appear in the following situations: • When the shift lever is in N. • When the vehicle speed is 10 km/h (6 mph) or less (except when the shift lever is in R).
Page 190 2-1. Driving procedures CAUTION  Gear Shift Indicator The indication of the gear shift indicator is only as a guideline for driving more fuel-efficiently. The indicator does not inform the driver about the safe shift operation timing. The driver has the responsibility for suitable shift oper- ation depending on the traffic conditions or driving conditions (e.g., overtak- ing or driving on an uphill slope).
Page 191: Turn Signal Lever
2-1. Driving procedures Turn signal lever The turn signal lever can be used to show the following intentions of the driver: Right turn Left turn Lane change to the right (push and hold the lever partway) The right hand signals will flash until you release the lever.
Page 192: Parking Brake
2-1. Driving procedures Parking brake To set the parking brake, fully pull the parking brake lever while depressing the brake pedal. To release the parking brake, slightly raise the lever and lower it completely while pressing the button.  Usage in winter time P.
Page 193: Horn
2-1. Driving procedures Horn To sound the horn, press on or close to the mark.  After adjusting the steering wheel Make sure that the steering wheel is securely locked. The horn may not sound if the steering wheel is not securely locked. (P.
Page 194: Gauges And Meters
2-2. Instrument cluster Gauges and meters The illustration below is for left-hand drive vehicles. The switch positions may differ slightly for right-hand drive vehi- cles. Analog Speedometer Displays the vehicle speed. Tachometer Displays the engine speed in revolutions per minute. Digital Speedometer (if equipped) Displays the vehicle speed.
Page 195 2-2. Instrument cluster Odometer, trip meter and multi-information display Odometer: Displays the total distance the vehicle has been driven. Trip meter: Displays the distance the vehicle has been driven since the meter was last reset. Trip meters A and B can be used to record and display different distances independently.
Page 196 2-2. Instrument cluster Switch the display Each time the “ODO/TRIP” switch is pressed, the display changes as follows. Odometer Trip meter A Trip meter B : Pressing and holding the “ODO/TRIP” switch will reset the trip meter that is currently displayed. Instrument panel light control The brightness of the instrument panel lights can be adjusted.
Page 197 2-2. Instrument cluster  The brightness of the instrument panel lights When the front position lights or the headlights turn on, the instrument panel lights will dim. However, when the instrument panel brightness control dial is turned to the up most position, the instrument panel lights will not dim even when the front position lights or headlights turn on.
Page 198: Indicators And Warning Lights
2-2. Instrument cluster Indicators and warning lights The indicator and warning lights on the instrument cluster and cen- ter panel inform the driver of the status of the vehicle’s various sys- tems. For the purpose of explanation, the following illustration displays all indicators and warning lights illuminated.
Page 199 2-2. Instrument cluster  Indicators The indicators inform the driver of the operating state of the vehicle’s various systems. Shift position indicator Turn signal indicator (P. 189) (P. 191) (Vehicles with a manual transmission) Gear Shift Indicator Headlight high beam (P.
Page 200 Have the vehicle inspected by any autho- rized Toyota dealer or repairer, or another duly qualified and equipped professional for details.
Page 201 Have the vehicle inspected by any autho- rized Toyota dealer or repairer, or another duly qualified and equipped professional for details.
Page 202 Have the vehicle inspected by any authorized Toyota dealer or repairer, or another duly qualified and equipped professional immediately...
Page 203: Multi-Information Display
2-2. Instrument cluster Multi-information display The multi-information display presents the driver with a variety of driving-related data, including the current outside air temperature.  Outside temperature  Current fuel consumption  Average fuel consumption  Setting screen for the REV indicator (if equipped)
Page 204 2-2. Instrument cluster Switch the display Each time the “DISP” switch is pressed, the display changes as fol- lows. Outside temperature P. 269 Current fuel consumption Displays the current rate of fuel consumption. Average fuel consumption Displays the average fuel consumption since the function was reset.
Page 205 2-2. Instrument cluster Setting the REV indicator (if equipped)  Changing the REV indicator settings The engine speed at which the REV indicator turns on at and whether a buzzer sounds or not when the light turns on can be set. Engine speed setting range: From 2000 to 7400 rpm (r/min) STEP Press the “DISP”...
Page 206 2-2. Instrument cluster Press and hold the “DISP” STEP switch. Each time the “DISP” switch is pressed and held, the buzzer changes between activated and deactivated. “b-on”: Buzzer activated “b-oFF”: Buzzer deactivated When the setting changes from “b-oFF” to “b-on”, the buzzer sounds 3 times.
Page 207 2-2. Instrument cluster  The multi-information display operate when Vehicles without a smart entry & start system The engine switch is in the “ON” position. Vehicles with a smart entry & start system The “ENGINE START STOP” switch is in IGNITION ON mode. CAUTION ...
Page 208: Windshield Wipers Headlight Switch
2-3. Operating the lights and windshield wipers Headlight switch The headlights can be operated manually or automatically. Turning the end of the lever turns on the lights as follows: The daytime running lights turn on. The headlights, front position, daytime run- (if equipped) ning lights and so on turn on and off auto-...
Page 209 2-3. Operating the lights and windshield wipers Turning on the high beam headlights With the headlights on, push the lever forward to turn on the high beams. Pull the lever back to the center position to turn the high beams off.
Page 210 2-3. Operating the lights and windshield wipers Manual headlight leveling dial (if equipped) The level of the headlights can be adjusted according to the number of passengers and the loading condition of the vehicle. Raises the level of the head- lights Lowers the level of the head- lights...
Page 211 2-3. Operating the lights and windshield wipers  Daytime running light system Vehicles with halogen headlights Vehicles with an automatic transmission: To make your vehicle more visible to other drivers, the daytime running lights turn on automatically whenever the engine is started, the shift lever is shifted out of P and the parking brake is released.
Page 212 2-3. Operating the lights and windshield wipers  Automatic light off system (if equipped) Vehicles without a smart entry & start system When the light switch is in : The headlights turn off auto- matically if the key is removed from the engine switch. To turn the lights on again, turn the engine switch to the “ON”...
Page 213 2-3. Operating the lights and windshield wipers  Battery-saving function (if equipped) In the following conditions, the headlights and the other remaining lights will go off automatically after 20 minutes in order to prevent the vehicle battery from being discharged: ...
Page 214 The light switch is pulled toward you and then released.  Customization that can be configured at any authorized Toyota dealer or repairer, or another duly qualified and equipped professional Settings (e.g. light sensor sensitivity) can be changed. (Customizable features P. 447) NOTICE ...
Page 215: Fog Light Switch
2-3. Operating the lights and windshield wipers  Fog light switch The fog lights secure excellent visibility in difficult driving condi- tions, such as in rain and fog. Rear fog light switch Turns the rear fog lights on. Releasing switch ring returns it to Operating the switch ring again...
Page 216 2-3. Operating the lights and windshield wipers Front and rear fog light switch Turns the front and rear fog lights off Turns the front fog lights on Turns both front and rear fog lights on Releasing switch ring returns it to Operating the switch ring again turns only the rear fog lights off.
Page 217: Windshield Wipers And Washer
2-3. Operating the lights and windshield wipers Windshield wipers and washer When intermittent windshield wiper operation is selected, the wiper interval can be adjusted. The wiper operation is selected by moving the lever as follows. Intermittent windshield wiper operation Low speed windshield wiper operation High speed...
Page 218 2-3. Operating the lights and windshield wipers Washer/wiper dual opera- tion The wipers will automatically operate a couple of times after the washer squirts. Vehicles with discharge head- lights: When the headlights are on and the lever is pulled and held, the headlight cleaners will operate once.
Page 219  When a nozzle becomes blocked In this case, contact any authorized Toyota dealer or repairer, or another duly qualified and equipped professional. Do not try to clear it with a pin or other object. The nozzle will be damaged.
Page 220: Systems Cruise Control
2-4. Using other driving systems  Cruise control Use the cruise control to maintain a set speed without depressing the accelerator pedal. Indicators Cruise control switch  Setting the vehicle speed STEP Press the “ON-OFF” button to activate the cruise control. Cruise control indicator (green) will come on.
Page 221 2-4. Using other driving systems  Adjusting the set speed To change the set speed, operate the lever until the desired set speed is obtained. Increases the speed Decreases the speed Fine adjustment: Momentarily move the lever in the desired direction.
Page 222 2-4. Using other driving systems  Canceling and resuming the constant speed control Pulling the lever toward you cancels the constant speed control. The speed setting is also can- celed when the brakes are applied or the clutch pedal (manual transmission only) is depressed.
Page 223  The system may be malfunctioning when In the following situations, the system may be malfunctioning. Have the vehi- cle inspected by any authorized Toyota dealer or repairer, or another duly qualified and equipped professional.  The cruise control indicator light comes on in yellow.
Page 224 2-4. Using other driving systems CAUTION  To avoid operating the cruise control by mistake Switch the cruise control off using the “ON-OFF” button when not in use.  Situations unsuitable for cruise control Do not use cruise control in any of the following situations. Doing so may result in loss of control and could cause an accident resulting in death or serious injury.
Page 225: Driving Assist Systems
2-4. Using other driving systems Driving assist systems To help enhance driving safety and performance, the following sys- tems operate automatically in response to various driving situations. Be aware, however, that these systems are supplementary and should not be relied upon too heavily when operating the vehicle. ...
Page 226 2-4. Using other driving systems Disabling the TRC system If the vehicle gets stuck in mud, dirt or snow, the TRC system may reduce power from the engine to the wheels. Pressing to turn the system off may make it easier for you to rock the vehicle in order to free it.
Page 227 2-4. Using other driving systems Selecting TRC mode and VSC mode Modes can be selected to suit your driving conditions as follows: Driving VSC modes Indicator lights conditions modes  Normal roads Normal mode Rough roads Normal mode “VSC SPORT” mode “VSC SPORT”...
Page 228 2-4. Using other driving systems  Turning off both TRC and VSC systems To turn the TRC and VSC systems off, press and hold for more than 3 seconds while the vehicle is stopped. The “TRC OFF” indicator light and the VSC off indicator light will come on. In this case, the brake LSD function remains on.
Page 229 2-4. Using other driving systems  Reduced effectiveness of the EPS system The effectiveness of the EPS system is reduced to prevent the system from overheating when there is frequent steering input over an extended period of time. The steering wheel may feel heavy as a result. Should this occur, refrain from excessive steering input or stop the vehicle and turn the engine off.
Page 230 The ABS, TRC and VSC systems will not function correctly if different tires are installed on the vehicle. Contact any authorized Toyota dealer or repairer, or another duly qualified and equipped professional for further information when replacing tires or wheels.
Page 231: Driving Information Cargo And Luggage
2-5. Driving information Cargo and luggage Take notice of the following information about storage precautions, cargo capacity and load:  Stow cargo and luggage in the trunk whenever possible.  Be sure all items are secured in place.  To maintain vehicle balance while driving, position luggage evenly within the luggage compartment.
Page 232 2-5. Driving information CAUTION  Storage precautions Observe the following precautions. Failure to do so may result in death or serious injury.  Stow cargo and luggage in the trunk whenever possible.  To prevent cargo and luggage from sliding forward during braking, do not stack anything in the enlarged trunk.
Page 233: Winter Driving Tips
2-5. Driving information Winter driving tips Carry out the necessary preparations and inspections before driving the vehicle in winter. Always drive the vehicle in a manner appropri- ate to the prevailing weather conditions.  Pre-winter preparations  Use fluids that are appropriate to the prevailing outside tem- peratures.
Page 234 2-5. Driving information  If a door is opened and closed when its side window is frozen, the window safety device will operate and the side window open/close function linked to door operation may not operate correctly. If this occurs, perform the following after the ice has melted.
Page 235 2-5. Driving information Selecting tire chains We recommend that you consult any authorized Toyota dealer or repairer, or another duly qualified and equipped professional for infor- mation about the chains that you can use. Regulations on the use of tire chains Regulations regarding the use of tire chains vary according to loca- tion and type of road.
Page 236 However, do not use the tire chain on a sealed tire. If any of the rear tires are punctured although it is required to use tire chains, contact any authorized Toyota dealer or repairer, or another duly qualified and equipped professional.
Page 237: Trailer Towing
Toyota also does not recommend the installation of a tow hitch or the use of a tow hitch carrier for a wheelchair, scooter, bicycle, etc. Your Toyota is not designed for trailer towing or for the use of tow hitch mounted carriers.
Page 238 2-5. Driving information...
Page 239: 3-1. Using The Air Conditioning
Interior features 3-1. Using the air 3-5. Other interior features conditioning system Sun visors ......266 and defogger Vanity mirrors....267 Manual air conditioning Clock......... 268 system ......240 Outside temperature Automatic air conditioning display ......269 system ......248 Ashtray......
Page 240: Manual Air Conditioning System
3-1. Using the air conditioning system and defogger  Manual air conditioning system Air outlet selection dial Temperature control dial Outside air or recirculated air mode Air conditioning on/off button Fan speed control dial (if equipped) Adjusting the settings STEP To adjust the fan speed, turn the fan speed control dial clock- wise (increase) or counterclockwise (decrease).
Page 241 3-1. Using the air conditioning system and defogger STEP Vehicles with the button: To adjust the temperature setting, turn the temperature control dial clockwise (warm) or counterclockwise (cool). is not pressed, the system will blow ambient temperature air or heated air. STEP To select the air outlets, set the air outlet selection dial to the desired position.
Page 242 3-1. Using the air conditioning system and defogger Defogging the windshield Set the air outlet selection dial to STEP position. If the recirculated air mode is used, it will automatically switch to the outside air mode. STEP Perform the following operations accordingly: ...
Page 243 3-1. Using the air conditioning system and defogger  Air outlets and air flow Air flows to the upper body. Air flows to the upper body and feet. Air flows to the feet. Air flows to the feet and the windshield defogger operates.
Page 244 3-1. Using the air conditioning system and defogger Switching between outside air and recirculated air modes Press The mode switches between outside air mode (introduces air from outside the vehicle) (indicator off) and recirculated air mode (recycles air inside the vehicle) (indicator on) each time the button is pressed. Adjusting the position of the air outlets Center outlets Direct air flow to the left or right,...
Page 245 3-1. Using the air conditioning system and defogger Opening and closing the air outlets Center outlets Open the air outlet. Close the air outlet. Right and left side outlets Open the vent. Close the vent.
Page 246 3-1. Using the air conditioning system and defogger  Fogging up of the windows  Vehicles with the button: The windows will easily fog up when the humidity in the vehicle is high. Turning on will dehumidify the air from the outlets and defog the windshield effectively. ...
Page 247 3-1. Using the air conditioning system and defogger  Ventilation and air conditioning odors  To let fresh air in, set the air conditioning system to the outside air mode.  During use, various odors from inside and outside the vehicle may enter into and accumulate in the air conditioning system.
Page 248: Automatic Air Conditioning System
3-1. Using the air conditioning system and defogger  Automatic air conditioning system Air outlets are automatically selected and fan speed is automatically adjusted according to the set temperature setting. The illustration below is for left-hand drive vehicles. The button positions may differ slightly for right-hand drive vehi- cles.
Page 249 3-1. Using the air conditioning system and defogger Using the automatic air conditioning system STEP Press The dehumidification function begins to operate. Air outlets and fan speed are automatically adjusted according to the temperature setting. STEP Turn temperature control dial clockwise to increase the tem- perature and turn temperature control dial counterclockwise to decrease the temperature on the driver’s side.
Page 250 3-1. Using the air conditioning system and defogger STEP To adjust the temperature settings, turn the temperature con- trol dial clockwise (warm) or counter-clock wise (cool). To adjust the temperature control dial clockwise (warm) or counter- clockwise (cool) on the passenger side to separately adjust the tem- perature for the passenger and driver sides (dual mode).
Page 251 3-1. Using the air conditioning system and defogger Air outlets and air flow Air flows to the upper body. Air flows to the upper body and feet. Air flows to the feet. Air flows to the feet and the windshield defogger operates. If the recirculated air mode is used, it may automatically switch to the outside air mode.
Page 252 3-1. Using the air conditioning system and defogger Switching between outside air mode and recirculated air mode Press The mode switches between outside air mode (indicator off) and recircu- lated air mode (indicator on) each time is pressed. Adjusting the position of the air outlets Center outlets Direct air flow to the left or right, up or down.
Page 253 3-1. Using the air conditioning system and defogger Opening and closing the air outlets Center outlets Open the air outlet. Close the air outlet. Right and left side outlets Open the vent. Close the vent.
Page 254 3-1. Using the air conditioning system and defogger  Using automatic mode Fan speed is adjusted automatically according to the temperature setting and the ambient conditions. Therefore, the fan may stop for a while until warm or cool air is ready to flow immediately after is pressed.
Page 255 3-1. Using the air conditioning system and defogger  Ventilation and air conditioning odors  To let fresh air in, set the air conditioning system to the outside air mode.  During use, various odors from inside and outside the vehicle may enter into and accumulate in the air conditioning system.
Page 256: Outside Rear View Mirror Defoggers
3-1. Using the air conditioning system and defogger Rear window and outside rear view mirror defoggers The rear window defogger is used to defog the rear window. The out- side rear view mirror defoggers* are used to remove frost, dew or raindrops from the outside rear view mirrors.
Page 257  Customization that can be configured at any authorized Toyota dealer or repairer, or another duly qualified and equipped professional (vehi- cles with an automatic air conditioning system) The rear window defogger can be set to 15-minute operation or continuous operation.
Page 258: Usb Port
3-2. Using the audio system  Using the AUX/USB port This port can be used to connect a portable audio device and listen to it through the vehicle’s speakers. Depending on the type of portable audio device, some device opera- tion may not be available.
Page 259 3-3. Using the interior lights Interior lights list Interior light (P. 260) Engine switch light (vehicles without a smart entry & start sys- tem) “ENGINE START STOP” switch light (vehicles with a smart entry & start system) Door courtesy lights (if equipped)
Page 260: Interior Light
 Door courtesy lights (if equipped)  Customization that can be configured at any authorized Toyota dealer or repairer, or another duly qualified and equipped professional Settings (e.g. the time elapsed before lights turn off) can be changed.  P. 447)
Page 261: Using The Storage Features
3-4. Using the storage features List of storage features Glove box Bottle holders Cup holders (if equipped)/console tray CAUTION  Items that should not be left in the storage spaces Do not leave glasses, lighters or spray cans in the storage spaces, as this may cause the following when cabin temperature becomes high: ...
Page 262: Glove Box
3-4. Using the storage features Glove box Glove box Pull up the lever to open the glove box. CAUTION  Caution while driving Keep the glove box closed. In the event of sudden braking or sudden swerv- ing, an accident may occur due to an occupant being struck by the open glove box or the items stored inside.
Page 263: Bottle Holders
3-4. Using the storage features Bottle holders Bottle holders  When using the bottle holder  When storing a bottle, close the cap.  The bottle may not be stored depending on its size or shape. CAUTION  Items unsuitable for the bottle holder Do not place anything other than a pet bottle in the bottle holders.
Page 264: Cup Holders  P
3-4. Using the storage features Cup holders/console tray Cup holders (if equipped)/console tray  Changing the cup holder position Remove the cup holder and change the holder position.  Changing the console tray size Remove the cup holder.
Page 265 3-4. Using the storage features Cup holders/console tray CAUTION  Caution while driving Observe the following precautions. Failure to do so may cause an accident resulting in death or serious injury.  Before driving, place the cup holder in the rear position so that it does not hinder shift lever operation.
Page 266: Other Interior Features Sun Visors
3-5. Other interior features Sun visors To set the visor in the for- ward position, flip it down. To set the visor in the side position, flip down, unhook, and swing it to the side.
Page 267 3-5. Other interior features  Vanity mirrors Open the cover to use. Vehicles with vanity lights: The light turns on when the cover is opened. NOTICE  To prevent battery discharge (vehicles with vanity lights) Do not leave the vanity lights on for extended periods while the engine is off. ...
Page 268: Clock
3-5. Other interior features Clock The clock can be adjusted by pressing the buttons. Adjusts the hours Adjusts the minutes Rounds nearest hour : e.g.1:00 to 1:29  1:00 1:30 to 1:59  2:00  The clock is displayed when Vehicles without a smart entry &...
Page 269: Outside Temperature Display
 When “- -” is displayed more than 1 minute or the outside temperature is not displayed The system may be malfunctioning. Take your vehicle to any authorized Toyota dealer or repairer, or another duly qualified and equipped profes- sional.
Page 270: Ashtray
3-5. Other interior features  Ashtray The ashtray can be installed in the cup holder. (P. 264) CAUTION  When not in use Keep the ashtray closed. In the event of sudden braking, an accident may occur due to an occupant being struck by the open ashtray or ash flying out. ...
Page 271 3-5. Other interior features Power outlets The power outlet can be used for 12 V accessories that run on 10 A or less. In the console tray In the glove box (if equipped)
Page 272 3-5. Other interior features  The power outlet can be used when Vehicles without a smart entry & start system The engine switch is in the “ACC” or “ON” position. Vehicles with a smart entry & start system The “ENGINE START STOP” switch is in ACCESSORY or IGNITION ON mode.
Page 273: Seat Heaters
3-5. Other interior features  Seat heaters Press the switch to warm the seats. The indicator light comes on when a seat heater is turned Rapid heating Normal heating  The seat heaters can be used when The “ENGINE START STOP” switch is in IGNITION ON mode. ...
Page 274 3-5. Other interior features NOTICE  To prevent seat heater damage Do not put heavy objects that have an uneven surface on the seat and do not stick sharp objects (needles, nails, etc.) into the seat.  To prevent battery discharge Turn the seat heaters off when the engine is not running.
Page 275: Floor Mat
3-5. Other interior features Floor mat Use only floor mats designed specifically for vehicles of the same model and model year as your vehicle. Fix them securely in place onto the carpet. Front Driver’s seat floor mat Front passenger’s seat floor Retaining hook (clip) eye- lets Rear...
Page 276 When installing a floor mat  Do not use floor mats designed for other models or different model year vehicles, even if they are Toyota Genuine floor mats.  Driver’s seat floor mat: Only use floor mats designed for the driver's seat.
Page 277 3-5. Other interior features NOTICE  When installing the rear floor mats Make sure that the rear floor mats are installed in the correct position. If a floor mat is positioned incorrectly, it may inter- fere with the seat rail or other parts when a front seat is moved forward or back- ward, damaging the vehicle or floor mat.
Page 278: Trunk Features
3-5. Other interior features Trunk features (vehicles with an emergency tire puncture repair kit)  Auxiliary box Vehicles with a luggage mat: Lift up the luggage mat.
Page 279 3-5. Other interior features  Warning reflector storage box The warning reflector can be stored.  Warning reflector storage box Depending on the size and shape of the warning reflector case, it may not be able to be stored. CAUTION ...
Page 280 3-5. Other interior features...
Page 281 Maintenance and care 4-1. Maintenance and care Cleaning and protecting the vehicle exterior ..282 Cleaning and protecting the vehicle interior ..285 Cleaning and protecting ® the Alcantara area ..289 4-2. Maintenance Maintenance requirements....291 4-3. Do-it-yourself maintenance Do-it-yourself service precautions .....
Page 282: The Vehicle Exterior
4-1. Maintenance and care Cleaning and protecting the vehicle exterior Perform the following to protect the vehicle and maintain it in prime condition.  Working from top to bottom, liberally apply water to the vehicle body, wheel wells and underside of the vehicle to remove any dirt and dust.
Page 283 4-1. Maintenance and care  Aluminum wheels  Remove any dirt immediately by using a neutral detergent. Do not use hard brushes or abrasive cleaners. Do not use strong or harsh chemical cleaners. Use the same mild detergent and wax as used on the paint. ...
Page 284 4-1. Maintenance and care NOTICE  To prevent paint deterioration and corrosion on the body and compo- nents (aluminum wheels etc.)  Wash the vehicle immediately in the following cases: • After driving near the sea coast • After driving on salted roads •...
Page 285: Cleaning And Protecting The Vehicle Interior
4-1. Maintenance and care Cleaning and protecting the vehicle interior The following procedures will help protect your vehicle's interior and keep it in top condition:  Protecting the vehicle interior  Remove dirt and dust using a vacuum cleaner. Wipe dirty sur- faces with a cloth dampened with lukewarm water.
Page 286 4-1. Maintenance and care  Caring for leather areas Toyota recommends cleaning the interior of the vehicle at least twice a year to maintain the quality of the vehicle’s interior.  Shampooing the carpets There are several commercial foaming-type cleaners available. Use a sponge or brush to apply the foam.
Page 287 4-1. Maintenance and care NOTICE  Cleaning detergents  Do not use organic substances such as benzene or gasoline, acidic or alkaline solutions, dye, bleach or other detergent. Doing so may discolor the vehicle interior or cause streaks or damage to painted surfaces. ...
Page 288 4-1. Maintenance and care NOTICE  Cleaning the inside of the rear window  Be careful not to scratch or damage the heater wires.  Do not use glass cleaner to clean the rear window, as this may cause damage to the rear window defogger heater wires. Use a cloth dampened with lukewarm water to gently wipe the window clean.
Page 289 4-1. Maintenance and care ®  Cleaning and protecting the Alcantara area The following procedures will protect and keep your vehicle’s Alcan- ® tara upholstery in top condition:  Day-to-day cleaning Perform the following procedures regularly (approximately once a month). ®...
Page 290 4-1. Maintenance and care ® STEP If the Alcantara upholstery surface becomes uneven, lightly brush it with a soft brush. STEP Allow the surface to dry completely.  Oil stains You will need the following items:  A cloth that has been dampened with benzene ...
Page 291: Maintenance Requirements
Toyota dealer or repairer, or another duly qualified and equipped profes- sional. Any authorized Toyota dealer or repairer will keep a record of maintenance, which could be useful should you ever require Warranty Service.
Page 292: Maintenance
 Engine coolant temperature continually higher than normal If you notice any of these clues, take your vehicle to any authorized Toyota dealer or repairer, or another duly qualified and equipped professional as soon as possible. Your vehicle may need adjustment or repair.
Page 293 4-2. Maintenance CAUTION  If your vehicle is not properly maintained It could result in serious damage to the vehicle and possible serious injury or death.  Warning in handling of the battery Battery posts, terminals and related accessories contain lead and lead com- pounds which are known to cause brain damage.
Page 294: Do-It-Yourself Service Precautions
Coolant BLUE” is pre-mixed with 50% coolant and 50% deionized water. • Funnel (used only for adding cool- ant) • “Toyota Genuine Motor Oil” or equivalent P. 302) Engine oil level • Rag or paper towel, funnel (used only for adding engine oil) •...
Page 295 4-3. Do-it-yourself maintenance Items Parts and tools Radiator and condenser  (P. 307) • Tire pressure gauge Tire inflation pressure (P. 323) • Compressed air source • Water washer fluid containing Washer fluid (P. 312) antifreeze (for winter use) • Funnel CAUTION The engine compartment contains many mechanisms and fluids that may move suddenly, become hot, or become electrically energized.
Page 296 4-3. Do-it-yourself maintenance CAUTION  When working near the electric cooling fans or radiator grille Vehicles without a smart entry & start system: Be sure the engine switch is off. With the engine switch in the “ON” position, the electric cooling fans may automatically start to run if the air conditioning is on and/or the coolant tem- perature is high.
Page 297: Hood
4-3. Do-it-yourself maintenance Hood Release the lock from the inside of the vehicle to open the hood. Pull the hood release lever. STEP The hood will pop up slightly. Push the auxiliary catch lever STEP to the left and lift the hood. Hold the hood open by insert- STEP ing the supporting rod into the...
Page 298  Do not attach any accessories other than genuine Toyota products to the engine hood. Such additional weight on the engine hood may cause it to be too heavy to be supported by the supporting rod when opened.
Page 299: Positioning A Floor Jack
4-3. Do-it-yourself maintenance Positioning a floor jack When raising your vehicle with a floor jack, position the jack cor- rectly. Improper placement may damage your vehicle or cause injury.  Front  Rear...
Page 300 4-3. Do-it-yourself maintenance CAUTION  When raising your vehicle Make sure to observe the following precautions to reduce the possibility of death or serious injury:  Lift up the vehicle using a floor jack such as the one shown in the illustra- tion.
Page 301: Engine Compartment
4-3. Do-it-yourself maintenance Engine compartment Battery* (P. 308) Electric cooling fans Engine oil level dipstick Condenser (if equipped) (P. 302) (P. 307) Engine oil filler cap Radiator (P. 307) (P. 303) Engine coolant reservoir Washer fluid tank (P. 312) (P. 305) Fuse box (P.
Page 302 4-3. Do-it-yourself maintenance Engine oil With the engine at operating temperature and turned off, check the oil level on the dipstick.  Checking the engine oil STEP Park the vehicle on level ground. After warming up the engine and turning it off, wait more than five minutes for the oil to drain back into the bottom of the engine.
Page 303 4-3. Do-it-yourself maintenance  Adding engine oil If the oil level is below or near the low level mark, add engine oil of the same type as already in the engine. Make sure to check the oil type and prepare the items needed before adding oil.
Page 304 Call any authorized Toyota dealer or repairer, or another duly qualified and equipped professional, service station or auto parts store for information concerning recycling or disposal.
Page 305 Visually check the radiator, hoses, engine coolant filler cap, radiator cap, drain cock and water pump. If you cannot find a leak, have any authorized Toyota dealer or repairer, or another duly qualified and equipped professional pressure test the cap and...
Page 306 “TOYOTA Genuine 50/50 Pre-mixed Super Long Life Coolant BLUE” is a mixture of 50% coolant and 50% deionized water. (Enabled: -35C [-31F]) For more details about engine coolant, contact any authorized Toyota dealer or repairer, or another duly qualified and equipped professional.
Page 307 Check the radiator and condenser and clear any foreign objects. If either of the above parts are extremely dirty or you are not sure of their condition, have your vehicle checked by any authorized Toyota dealer or repairer, or another duly qualified and equipped profes- sional.
Page 308 4-3. Do-it-yourself maintenance Battery Check the battery as follows.  Caution symbols The meanings of each caution symbol on the top of the battery are as follows: No smoking, no naked Battery acid flames, no sparks Note operating Shield eyes instructions Keep away from chil- Explosive gas...
Page 309 4-3. Do-it-yourself maintenance  Checking battery fluid Check that the level is between “UPPER LEVEL” and “LOWER LEVEL”. “UPPER LEVEL” “LOWER LEVEL” If the fluid level is at or below “LOWER LEVEL”, add distilled water.  Adding distilled water O.K. STEP Remove the vent plug.
Page 310 Take extra care when connecting the battery if the “ENGINE START STOP” switch mode prior to discharge is unknown. If the engine will not start even after multiple attempts, contact any authorized Toyota dealer or repairer, or another duly qualified and equipped professional.
Page 311 4-3. Do-it-yourself maintenance CAUTION  Chemicals in the battery A battery contains poisonous and corrosive sulfuric acid and may produce hydrogen gas which is flammable and explosive. To reduce the risk of death or serious injury, take the following precautions while working on or near the battery: ...
Page 312 4-3. Do-it-yourself maintenance NOTICE  When recharging the battery Never recharge the battery while the engine is running. Also, be sure all accessories are turned off.  When adding distilled water Avoid overfilling. Water spilled during battery recharging may cause corro- sion.
Page 313 4-3. Do-it-yourself maintenance CAUTION  When adding washer fluid Do not add washer fluid when the engine is hot or running, as washer fluid contains alcohol and may catch fire if spilled on the engine etc. NOTICE  Washer fluid Do not use soapy water or engine antifreeze instead of washer fluid.
Page 314: Tires
Vehicles with an emergency tire puncture repair kit Rotate the tires in the order shown. To equalize tire wear and help extend tire life, Toyota recom- mends that tire rotation is car- Front ried out approximately every 10000 km (6000 miles).
Page 315 10000 km (6000 miles).  Tire pressure warning system Your Toyota is equipped with a tire pressure warning system that uses tire pressure warning valves and transmitters to detect low tire inflation pressure before serious problems arise. (P. 375)
Page 316 4-3. Do-it-yourself maintenance  How to initialize the tire pressure warning system STEP Park the vehicle in a safe place and turn the “ENGINE START STOP” switch (vehicles with a smart entry & start system) or the engine switch (vehicles without a smart entry & start sys- tem) off.
Page 317 The tire pressure warning valve and transmitter is equipped with a unique ID code. When replacing a tire pressure warning valve and transmitter, it is necessary to register the ID code. Have the ID code registered by any authorized Toyota dealer or repairer, or another duly qualified and equipped professional.
Page 318 A tire goes flat repeatedly or cannot be properly repaired due to the size or location of a cut or other damage If you are not sure, consult with any authorized Toyota dealer or repairer, or another duly qualified and equipped professional.
Page 319 4-3. Do-it-yourself maintenance  Tire pressure warning system certification...
Page 320 4-3. Do-it-yourself maintenance...
Page 321 Make sure to install 4 tires that are of the specified size, and that all 4 tires are the same size, same maker, same brand and tread pattern.  Do not use tire sizes other than those recommended by Toyota.  Only use radial tires.
Page 322 When a tire is repaired with liquid sealants, the tire pressure warning valve and transmitter may not operate properly. If a liquid sealant is used, contact any authorized Toyota dealer or repairer, or another duly qualified and equipped professional or other qualified service shop as soon as possible.
Page 323: Tire Inflation Pressure
 Reduced safety  Damage to the drive train If a tire needs frequent refilling, have it checked by any authorized Toyota dealer or repairer, or another duly qualified and equipped professional.  Instructions for checking tire pressure When checking tire inflation pressure, observe the following: ...
Page 324 4-3. Do-it-yourself maintenance CAUTION  Proper inflation is critical to save tire performance Keep your tires properly inflated. Otherwise, the following conditions may occur and result in an accident causing death or serious injury.  Excessive wear  Uneven wear ...
Page 325: Wheels
 Bent wheels that have been straightened  Aluminum wheel precautions  Use only Toyota wheel nuts and wrenches designed for use with your aluminum wheels.  When rotating, repairing or changing your tires, check that the wheel nuts are still tight after driving 1600 km (1000 miles).
Page 326  When replacing wheels The wheels of your Toyota are equipped with tire pressure warning valves and transmitters that allow the tire pressure warning system to provide advance warning in the event of a loss in tire inflation pressure. Whenever wheels are replaced, the tire pressure warning valves and transmitters must be installed.
Page 327 Because tire repair or replacement may affect the tire pressure warning valves and transmitters, make sure to have tires serviced by any autho- rized Toyota dealer or repairer, or another duly qualified and equipped pro- fessional or other qualified service shop. In addition, make sure to...
Page 328: Air Conditioning Filter
4-3. Do-it-yourself maintenance Air conditioning filter The air conditioning filter must be changed regularly to maintain air conditioning efficiency.  Removal method STEP Vehicles without a smart entry & start system Turn the engine switch off. Vehicles with a smart entry & start system Turn the “ENGINE START STOP”...
Page 329 4-3. Do-it-yourself maintenance Lower the glove box slowly STEP until surface is horizontal with the floor, then pull it out. (Simply pulling with gentle force will disengage the lower claws.) Lower claw Lower claw engagement point Do not forcibly pull the glove box.
Page 330 Inspect and replace the air conditioning filter according to the maintenance schedule. In dusty areas or areas with heavy traffic flow, early replacement may be required. (For scheduled maintenance information, please refer to the “Toyota Service Booklet” or “Toyota Warranty Booklet”.)  If air flow from the vents decreases dramatically The filter may be clogged.
Page 331: Wireless Remote Control Electronic Key Battery
4-3. Do-it-yourself maintenance Wireless remote control/electronic key battery Replace the battery with a new one if it is depleted.  You will need the following items:  Flathead screwdriver  Lithium battery CR2016 (vehicles without a smart entry & start system), or CR1632 (vehicles with a smart entry &...
Page 332 4-3. Do-it-yourself maintenance Open the case cover using a STEP coin protected with tape etc. and remove the depleted bat- tery. Insert a new battery with the “+” terminal facing up.  Replacing the battery (vehicles with a smart entry & start system) Take out the mechanical key.
Page 333 Use a CR2016 (vehicles without a smart entry & start system) or CR1632 (vehicles with a smart entry & start system) lithium battery  Batteries can be purchased at any authorized Toyota dealer or repairer, or another duly qualified and equipped professional, local electrical appli- ance shops or camera stores.
Page 334 4-3. Do-it-yourself maintenance CAUTION  Removed battery and other parts These parts are small and if swallowed by a child, they can cause choking. Keep away from children. Failure to do so could result in death or serious injury.  Certification for the lithium battery ...
Page 335: Checking And Replacing Fuses
4-3. Do-it-yourself maintenance Checking and replacing fuses If any of the electrical components do not operate, a fuse may have blown. If this happens, check and replace the fuses as necessary. STEP Vehicles without a smart entry & start system Turn the engine switch off.
Page 336 4-3. Do-it-yourself maintenance STEP After a system failure, see “Fuse layout and amperage rat- ings” (P. 338) for details about which fuse to check. Remove the fuse with the pull- STEP out tool. STEP Check if the fuse has blown. Type A Normal fuse Blown fuse...
Page 337 4-3. Do-it-yourself maintenance Type C Normal fuse Blown fuse Contact any authorized Toyota dealer or repairer, or another duly qualified and equipped professional. Type D Normal fuse Blown fuse Contact any authorized Toyota dealer or repairer, or another duly qualified and equipped...
Page 338 4-3. Do-it-yourself maintenance Fuse layout and amperage ratings  Engine compartment Fuse Ampere Circuit MIR HTR 7.5 A Outside rear view mirror defoggers 25 A Electric cooling fan (PUSH-AT) 7.5 A Engine control unit ABS NO. 1 40 A HEATER 50 A Air conditioning system WASHER...
Page 339 4-3. Do-it-yourself maintenance Fuse Ampere Circuit SPARE See note. Spare fuse SPARE See note. Spare fuse SPARE See note. Spare fuse SPARE See note. Spare fuse SPARE See note. Spare fuse 7.5 A Starting system ALT-S 7.5 A Charging system (STR LOCK) 7.5 A Steering lock system...
Page 340 4-3. Do-it-yourself maintenance Fuse Ampere Circuit HORN NO. 2 7.5 A Horn HORN NO. 1 7.5 A Horn H-LP LH LO 15 A Left-hand headlight (low beam) H-LP RH LO 15 A Right-hand headlight (low beam) H-LP LH HI 10 A Left-hand headlight (high beam) H-LP RH HI 10 A...
Page 341 4-3. Do-it-yourself maintenance  Instrument panel Fuse Ampere Circuit Main body ECU, outside rear view ECU ACC 10 A mirrors P/POINT No.2 15 A Power outlet PANEL 10 A Illumination TAIL 10 A Tail lights 10 A Daytime running light system STOP 7.5 A Stop lights...
Page 342  Do not modify the fuse or the fuse box. NOTICE  Before replacing fuses Have the cause of electrical overload determined and repaired by any autho- rized Toyota dealer or repairer, or another duly qualified and equipped pro- fessional.
Page 343: Light Bulbs
You may replace the following bulbs by yourself. The difficulty level of replacement varies depending on the bulb. As there is a danger that components may be damaged, we recommend that replacement is carried out by any authorized Toyota dealer or repairer, or another duly qualified and equipped professional. ...
Page 344 4-3. Do-it-yourself maintenance  Rear bulb locations Rear turn signal lights License plate lights Rear fog light Back-up lights...
Page 345 4-3. Do-it-yourself maintenance Replacing light bulbs  Headlight low beams (vehicles with halogen bulbs) Turn the bulb base counterclock- STEP wise. Unplug connector while STEP depressing the lock release. Replace the light bulb, and install STEP the bulb base. Align the 3 tabs on the light bulb with the mounting, and insert.
Page 346 4-3. Do-it-yourself maintenance Turn and secure the bulb base. STEP Shake the bulb base gently to check that it is not loose, turn the headlight low beams on once and visually confirm that no light is leaking through the mounting. ...
Page 347 4-3. Do-it-yourself maintenance Turn and secure the bulb. Install STEP the connector. Shake the bulb base gently to check that it is not loose, turn the headlight high beams on once and visually confirm that no light is leaking through the mounting. ...
Page 348 4-3. Do-it-yourself maintenance  Side turn signal lights Turn the steering wheel in the STEP opposite direction of the light to be replaced. Turn the steering wheel to a point that allows your hand to easily fit between the tire and fender liner. Remove the clip and partly STEP remove the fender liner.
Page 349 4-3. Do-it-yourself maintenance Remove the light bulb. STEP STEP When installing, reverse the steps listed.  Front turn signal lights Turn the steering wheel in the STEP opposite direction of the light to be replaced. Turn the steering wheel to a point that allows your hand to easily fit between the tire and fender liner.
Page 350 4-3. Do-it-yourself maintenance Turn the bulb base counterclock- STEP wise. Remove the light bulb. STEP STEP When installing, reverse the steps listed.
Page 351 4-3. Do-it-yourself maintenance  Daytime running lights (vehicles with halogen headlights)/ front fog lights (if equipped) Turn the steering wheel in the STEP opposite direction of the light to be replaced. Turn the steering wheel to a point that allows your hand to easily fit between the tire and fender liner.
Page 352 4-3. Do-it-yourself maintenance Daytime running lights/front STEP fog lights Front fog lights Unplug the connector and remove the light bulb. Daytime running lights Remove the light bulb. Daytime running lights STEP Remove the light bulb. STEP STEP Replace the light bulb with a new one. STEP STEP Daytime running lights/front fog lights...
Page 353 4-3. Do-it-yourself maintenance  Front fog lights (vehicles with discharge headlights) Turn the steering wheel in the STEP opposite direction of the light to be replaced. Turn the steering wheel to a point that allows your hand to easily fit between the tire and fender liner.
Page 354 4-3. Do-it-yourself maintenance Remove the light bulb. STEP STEP When installing, reverse the steps listed.  Rear turn signal lights On some models, remove a clip STEP and partly remove the cover. To prevent damage to the vehicle, cover the tip of the screwdriver with a rag.
Page 355 4-3. Do-it-yourself maintenance Remove the light bulb. STEP STEP When installing, reverse the steps listed.  Back-up lights Turn the bulb base counterclock- STEP wise. Remove the light bulb. STEP STEP STEP When installing, reverse the steps listed.
Page 356 4-3. Do-it-yourself maintenance  Rear fog light Turn the bulb base counterclock- STEP wise. Remove the light bulb. STEP STEP STEP When installing, reverse the steps listed.
Page 357 4-3. Do-it-yourself maintenance  License plate lights Vehicles with a trunk panel STEP cover: Remove the trunk panel cover clips and partly remove the trunk panel cover. To prevent damage to the vehicle, cover the tip of the screwdriver with a rag. Turn the bulb base counterclock- STEP wise.
Page 358 The front position lights (vehicles with discharge headlights), stop/tail lights and high mounted stoplight consist of a number of LEDs. If any of the LEDs burn out, take your vehicle to any authorized Toyota dealer or repairer, or another duly qualified and equipped professional to have the light replaced.
Page 359 4-3. Do-it-yourself maintenance  When replacing light bulbs Toyota recommends that you use genuine Toyota products designed for this vehicle. Because certain bulbs are connected to circuits designed to prevent over- load, non-genuine parts or parts not designed for this vehicle may be unus- able.
Page 360 CAUTION  Discharge headlights (if equipped)  Contact any authorized Toyota dealer or repairer, or another duly qualified and equipped professional, before replacing the discharge headlights (including light bulbs).  Do not touch the discharge headlight’s high voltage socket when the head- lights are turned on.
Page 361 When trouble arises 5-1. Essential information If the electronic key does not operate Emergency flashers..362 properly......414 If your vehicle needs to If the battery is be towed ......363 discharged ...... 418 If you think something is If your vehicle wrong......
Page 362: Emergency Flashers
5-1. Essential information Emergency flashers The emergency flashers are used to warn other drivers when the vehicle has to be stopped in the road due to a breakdown, etc. Press the switch. All the turn signal lights will flash. To turn them off, press the switch once again.
Page 363: If Your Vehicle Needs To Be Towed
If your vehicle needs to be towed If towing is necessary, we recommend having your vehicle towed by any authorized Toyota dealer or repairer, or another duly qualified and equipped professional or a commercial towing service, using a lift-type truck or a flat bed truck.
Page 364 5-1. Essential information Towing eyelet  Before emergency towing STEP Release the parking brake. STEP Shift the shift lever to N. STEP Vehicles without a smart entry & start system: Turn the engine switch to the “ACC” (engine off) or “ON” (engine running) position. Vehicles with a smart entry &...
Page 365 5-1. Essential information NOTICE  To prevent causing serious damage to the transmission in emergency towing (vehicles with an automatic transmission) Never tow a vehicle from the rear with four wheels on the ground. This may cause serious damage to the transmission. ...
Page 366 5-1. Essential information Rear Insert the towing eyelet into the STEP hole and tighten partially by hand. Tighten down the towing eyelet STEP securely using a wheel nut wrench.
Page 367 5-1. Essential information  Location of the emergency towing eyelet P. 384, 394 CAUTION  Installing towing eyelets to the vehicle Make sure that towing eyelet is installed securely. If not securely installed, towing eyelets may come loose during towing. This may lead to accidents that cause serious injury or even death.
Page 368 5-1. Essential information Towing with a wheel lift-type truck From the front Vehicles with an automatic trans- mission: Use a towing dolly under the rear wheels. Vehicles with a manual transmis- sion: We recommend using a towing dolly under the rear wheels.
Page 369 5-1. Essential information NOTICE  To prevent causing serious damage to the transmission when towing using a wheel-lift type truck (vehicles with an automatic transmission) Never tow this vehicle from the front with the rear wheels on the ground.  To prevent damaging the vehicle ...
Page 370: If You Think Something Is Wrong
5-1. Essential information If you think something is wrong If you notice any of the following symptoms, your vehicle probably needs adjustment or repair. Contact any authorized Toyota dealer or repairer, or another duly qualified and equipped professional as soon as possible.
Page 371: Fuel Pump Shut Off System
5-1. Essential information Fuel pump shut off system To minimize the risk of fuel leakage when the engine stalls or an air- bag inflates upon collision, the fuel pump shut off system stops sup- plying fuel to the engine. Follow the procedure below to restart the engine after the system is activated.
Page 372: On Or A Warning Buzzer Sounds
The following warning indicates the possibility of damage to the vehi- cle that may lead to an accident. Immediately stop the vehicle in a safe place and contact any authorized Toyota dealer or repairer, or another duly qualified and equipped professional.
Page 373: Have The Vehicle Inspected Immediately
Failing to investigate the cause of the following warnings may lead to the system operating abnormally and possibly cause an accident. Have the vehicle inspected by any authorized Toyota dealer or repairer, or another duly qualified and equipped professional immedi- ately.
Page 374 If the fuel tank is empty, refuel the vehicle immediately. The malfunction indicator lamp will go off after several trips. If the malfunction indicator lamp does not go off, contact any authorized Toyota dealer or repairer, or another duly qualified and equipped profes- sional as soon as possible. ...
Page 375 5-2. Steps to take in an emergency Follow the correction procedures. After taking the specified steps to correct the suspected problem, check that the warning light turns off. Warning light Warning light/Details Correction procedure Open door warning light Check that both side doors Indicates that a door or the and the trunk are closed.
Page 376 • Natural causes (P. 377) is adjusted, have the sys- • Flat tire (P. 384, 393) tem checked by any autho- rized Toyota dealer or repairer, or another duly qualified and equipped pro- fessional. When the light comes on...
Page 377 5-2. Steps to take in an emergency : Driver's and front passenger’s seat belt buzzer: The driver’s and front passenger’s seat belt buzzer sounds to alert the driver and front passenger that his or her seat belt is not fastened. The buzzer sounds for 30 seconds after the vehicle has reached a speed of at least 20 km/h (12 mph).
Page 378 IGNITION ON mode (vehicles with a smart entry & start system) or the engine switch is turned to the “ON” position (vehicles without a smart entry & start system), have it checked by any authorized Toyota dealer or repairer, or another duly qualified and equipped professional.
Page 379 Check the tires. If the tire is flat, change to the spare tire and have the flat tire repaired by the nearest any authorized Toyota dealer or repairer, or another duly qualified and equipped professional.
Page 380 5-2. Steps to take in an emergency Follow the correction procedures. (vehicles with a smart entry & start system) After taking the specified steps to correct the suspected problem, check that the warning light goes off. Interior Exterior Warning Correction Warning light/Details buzzer buzzer...
Page 381 5-2. Steps to take in an emergency Interior Exterior Warning Correction Warning light/Details buzzer buzzer light procedure Smart entry & start system indicator light Vehicles with an automatic transmission: The electronic key was car- ried outside the vehicle and the driver’s door was opened Turn the and closed while the shift “ENGINE...
Page 382 5-2. Steps to take in an emergency Interior Exterior Warning Correction Warning light/Details buzzer buzzer light procedure Smart entry & start system Turn the indicator light “ENGINE An attempt was made to exit START the vehicle with the elec- Continuous STOP”...
Page 383 5-2. Steps to take in an emergency Interior Exterior Warning Correction Warning light/Details buzzer buzzer light procedure Vehicles with an automatic transmission: Touch the electronic key to the “ENGINE START STOP” switch while Smart entry & start system depressing indicator light the brake The electronic key could not pedal.
Page 384: If You Have A Flat Tire
5-2. Steps to take in an emergency If you have a flat tire (vehicles with a spare tire) Your vehicle is equipped with a spare tire. The flat tire can be replaced with the spare tire.  Before jacking up the vehicle ...
Page 385 5-2. Steps to take in an emergency Taking out the spare tire Loosen the center fastener that secures the spare tire. Replacing a flat tire Chock the tires. STEP Wheel chock Flat tire positions Behind the Left- rear right- hand hand side side tire...
Page 386 5-2. Steps to take in an emergency Slightly loosen the wheel nuts STEP (one turn). Turn the tire jack portion “A” by STEP hand until the notch of the jack is in contact with the jack point. Raise the vehicle until the tire is STEP slightly raised off the ground.
Page 387 5-2. Steps to take in an emergency Installing the spare tire Remove any dirt or foreign mat- STEP ter from the wheel contact sur- face. If foreign matter is on the wheel contact surface, the wheel nuts may loosen while the vehicle is in motion, and the tire may come off the vehicle.
Page 388 5-2. Steps to take in an emergency Firmly tighten each nut two or STEP three times in the order shown in the illustration. Tightening torque: 120 N•m (12.2 kgf•m, 89 ft•lbf) STEP Stow the flat tire, tire jack and all tools. ...
Page 389 5-2. Steps to take in an emergency  Certification for the jack...
Page 390 5-2. Steps to take in an emergency CAUTION  Using the tire jack Improper use of the tire jack may lead to death or serious injuries due to the vehicle suddenly falling off the jack.  Do not use the tire jack for any purpose other than replacing tires or install- ing and removing tire chains.
Page 391 • If there are any cracks or deformations in the bolt screws, nut threads or bolt holes of the wheel, have the vehicle inspected by any autho- rized Toyota dealer or repairer, or another duly qualified and equipped professional. • When installing the wheel nuts, be sure to install them with the tapered...
Page 392 When replacing the tires When removing or fitting the wheels, tires or the tire pressure warning valve and transmitter, contact any authorized Toyota dealer or repairer, or another duly qualified and equipped professional as the tire pressure warning valve and transmitter may be damaged if not handled correctly.
Page 393 (P. 396) After temporarily repairing the tire with the kit, have the tire repaired or replaced by any authorized Toyota dealer or repairer, or another duly qualified and equipped professional. Repairs conducted using the emergency tire puncture repair kit are only a temporary measure.
Page 394 5-2. Steps to take in an emergency  Location of the emergency tire puncture repair kit, jack and tools Jack handle Towing eyelet Emergency tire puncture repair kit Wheel nut Jack* wrench Screwdriver *: Use of the jack (P. 385) ...
Page 395 5-2. Steps to take in an emergency Before performing emergency repair Check the degree of the tire damage. • Do not remove the nail or screw from the tire. Removing the object may widen the opening and prevent emer- gency repair with the repair kit. •...
Page 396 5-2. Steps to take in an emergency  In the following cases, the tire cannot be repaired with the emergency tire puncture repair kit. Contact any authorized Toyota dealer or repairer, or another duly qualified and equipped professional.  When the tire is damaged due to driving without sufficient air pressure ...
Page 397 5-2. Steps to take in an emergency Emergency repair method STEP Shake the sealant bottle up and down several times and remove the cap of the sealant bottle. Connect the injection hose by STEP screwing onto the sealant. As it Injection is screwed in, the aluminum seal hose...
Page 398 5-2. Steps to take in an emergency Pull out the valve core by turning STEP it counterclockwise using the valve core tool. Valve core Remove the plug from the injec- STEP tion hose. Plug Injection hose Connect the injection hose to the STEP Valve valve.
Page 399 Remove any dirt and moisture from the wheel before attaching the label. If it is impossible to attach the label, make sure to tell any authorized Toyota dealer or repairer, or another duly qualified and equipped professional when you have them repair and replace the tire that sealant is injected.
Page 400 5-2. Steps to take in an emergency Connect the compressor power STEP Power plug plug to the power outlet. Vehicles without a smart entry & start system: The engine switch must be in the “ACC” position. Power Vehicles with a smart entry & start outlet system: The “ENGINE START STOP”...
Page 401 If the inflation pressure is not attained within 10 minutes, emergency repair is not possible due to severe damage. Contact any authorized Toyota dealer or repairer, or another duly qualified and equipped pro- fessional. STEP...
Page 402 Taking precautions to avoid sudden braking, sudden accelera- tion and sharp turns, drive carefully at under 80 km/h (50 mph) to the nearest authorized Toyota dealer or repairer, or another duly qualified and equipped professional for tire repair or replacement.
Page 403 If the sealant has been used and needs to be replaced, purchase a new bottle at any authorized Toyota dealer or repairer, or another duly qualified and equipped profes- sional. The compressor is reusable.
Page 404 5-2. Steps to take in an emergency CAUTION  Do not drive the vehicle with a flat tire Do not continue driving with a flat tire. Driving even a short distance with a flat tire can damage the tire and the wheel beyond repair.
Page 405 5-2. Steps to take in an emergency CAUTION  When fixing the flat tire  Stop your vehicle in a safe and flat area.  If force is used to turn the valve core tool while air remains in the tire, spe- cial care should be taken because the valve core could fly out.
Page 406 5-2. Steps to take in an emergency CAUTION  When fixing the flat tire  After inflation of the tire has completed, the sealant may splatter when the hose is disconnected or some air is let out of the tire. ...
Page 407 5-2. Steps to take in an emergency NOTICE  When performing an emergency repair  A tire should only be repaired with the emergency tire puncture repair kit if the damage is caused by a sharp object such as nail or screw passing through the tire tread.
Page 408 When a tire is repaired with liquid sealants, the tire pressure warning valve and transmitter may not operate properly. If a liquid sealant is used, contact any authorized Toyota dealer or repairer, or another duly qualified and equipped professional or other qualified service shop as soon as possible.
Page 409: If The Engine Will Not Start
5-2. Steps to take in an emergency If the engine will not start If the engine will not start even though correct starting procedures are being followed (P. 169, 178), consider each of the following points.  The engine will not start even when the starter motor oper- ates normally.
Page 410 Even if the engine can be started using the above steps, the system may be malfunctioning. Have the vehicle checked by any authorized Toyota dealer or repairer, or another duly qualified and equipped pro- fessional.
Page 411 15 seconds while depressing the brake pedal and clutch pedal firmly. Even if the engine can be started using the above steps, the system may be malfunctioning. Have the vehicle checked by any authorized Toyota dealer or repairer, or another duly qualified and equipped pro- fessional.
Page 412: If The Shift Lever Cannot Be Shifted From P
(a system to prevent accidental operation of the shift lever). Have the vehicle inspected by any authorized Toyota dealer or repairer, or another duly qualified and equipped professional immediately. The following steps may be used as an emergency measure to ensure that the shift lever can be shifted.
Page 413: If You Lose Your Keys
5-2. Steps to take in an emergency If you lose your keys New genuine keys can be made by any authorized Toyota dealer or repairer, or another duly qualified and equipped professional. For vehicles without a smart entry & start system, bring a master key and the key number stamped on the key number plate.
Page 414: If The Electronic Key Does Not Operate Properly
5-2. Steps to take in an emergency If the electronic key does not operate properly (vehicles with a smart entry & start system) If communication between the electronic key and vehicle is inter- rupted (P. 40) or the electronic key cannot be used because the battery is depleted, the smart entry &...
Page 415 & start system indicator light (green) turns on. STEP Press the “ENGINE START STOP” switch. In the event that the “ENGINE START STOP” switch still cannot be operated, contact any authorized Toyota dealer or repairer, or another duly qualified and equipped professional.
Page 416 & start system indicator light (green) turns on. STEP Press the “ENGINE START STOP” switch. In the event that the “ENGINE START STOP” switch still cannot be operated, contact any authorized Toyota dealer or repairer, or another duly qualified and equipped professional.
Page 417 5-2. Steps to take in an emergency  Stopping the engine Vehicles with an automatic transmission: Shift the shift lever to P and press the “ENGINE START STOP” switch as you normally do when stopping the engine. Vehicles with a manual transmission: Shift the shift lever to N and press the “ENGINE START STOP”...
Page 418: If The Battery Is Discharged
The following procedures may be used to start the engine if the vehi- cle's battery is discharged. You can call any authorized Toyota dealer or repairer, or another duly qualified and equipped professional or a qualified repair shop. If you have a set of jumper (or booster) cables and a second vehi- cle with a 12-volt battery, you can jump start your vehicle following the steps below.
Page 419 5-2. Steps to take in an emergency Right-hand drive vehicles Positive (+) battery terminal on your vehicle Positive (+) battery terminal on the second vehicle Negative (-) battery terminal on the second vehicle Connect the jumper cable to ground on your vehicle as shown in the illustration.
Page 420 Once the engine starts, have the vehicle checked at any autho- rized Toyota dealer or repairer, or another duly qualified and equipped professional as soon as possible. ...
Page 421 5-2. Steps to take in an emergency  The “ENGINE START STOP” switch mode is memorized by the vehicle. When the battery is reconnected, the system will return to the mode it was in before the battery was discharged. Before disconnecting the bat- tery, turn the “ENGINE START STOP”...
Page 422 5-2. Steps to take in an emergency CAUTION  To prevent damage to the vehicle Do not pull- or push-start the vehicle as the three-way catalytic converter may overheat and become a fire hazard. NOTICE  When handling jumper cables Be careful that the jumper cables do not become tangled in the cooling fans or any of the belts when connecting or disconnecting them.
Page 423: If Your Vehicle Overheats
Wait until the temperature of the engine (shown on the instrument cluster) begins to fall and then stop the engine. If the fan is not operating: Stop the engine and call any authorized Toyota dealer or repairer, or another duly qualified and equipped profes- sional.
Page 424 Water can be used in an emer- gency if engine coolant is unavailable. (P. 439) Have the vehicle checked at the nearest authorized Toyota dealer or repairer, or another duly qualified and equipped professional as soon as possible. ...
Page 425 5-2. Steps to take in an emergency NOTICE  When adding engine coolant Wait until the engine has cooled down before adding engine coolant. When adding coolant, do so slowly. Adding cool coolant to a hot engine too quickly can cause damage to the engine.
Page 426: If The Vehicle Becomes Stuck
5-2. Steps to take in an emergency If the vehicle becomes stuck Carry out the following procedures if the tires spin or the vehicle becomes stuck in mud, dirt, or snow: STEP Stop the engine. Set the parking brake and shift the shift lever to P (vehicles with an automatic transmission) or N (vehicles with a manual transmission).
Page 427 5-2. Steps to take in an emergency CAUTION  When attempting to free a stuck vehicle If you choose to push the vehicle back and forth to free it, make sure the sur- rounding area is clear to avoid striking other vehicles, objects or people. The vehicle may also lunge forward or lunge back suddenly as it becomes free.
Page 428 5-2. Steps to take in an emergency If your vehicle has to be stopped in an emergency Only in an emergency, such as if it becomes impossible to stop the vehicle in the normal way, stop the vehicle using the following pro- cedure: STEP Steadily step on the brake pedal with both feet and firmly...
Page 429 5-2. Steps to take in an emergency Vehicles with a smart entry & STEP start system: To stop the engine, press and hold the “ENGINE START STOP” switch for 2 consecutive sec- Press and hold for 2 seconds or more, onds or more, or press it or press briefly 3 times or more briefly 3 times or more in suc-...
Page 430 5-2. Steps to take in an emergency...
Page 431: 6-1. Specifications
Vehicle specifications 6-1. Specifications Maintenance data (fuel, oil level, etc.)..432 Fuel information ....445 6-2. Customization Customizable features ..447...
Page 432 6-1. Specifications Maintenance data (fuel, oil level, etc.) Dimensions and weight 4240 mm (166.9 in.) Overall length 4255 mm (167.5 in.) 1775 mm (69.9 in.) Overall width 1795 mm (70.6 in.) Overall height 1320 mm (52.0 in.) Wheelbase 2570 mm (101.2 in.) Front 1520 mm (59.8 in.) Tread...
Page 433 The vehicle identification number (VIN) is the legal identifier for your vehicle. This is the primary identification number for your Toyota. It is used in registering the ownership of your vehicle. This number is stamped under the right-hand front seat.
Page 434 6-1. Specifications  Engine number The engine number is stamped on the engine block as shown.
Page 435 6-1. Specifications Engine Model FA20 Horizontally opposed, liquid cooled 4 cylinder, 4- Type stroke gasoline 86.0  86.0 mm (3.39 3.39 in.) Bore and stroke Displacement 1998 cm (121.93 cu.in.) Drive belt tension Automatic adjustment Fuel EU area: Unleaded gasoline conforming to European stan- Fuel type dard EN228 only Except EU area:...
Page 436  Engine oil selection “Toyota Genuine Motor Oil” is used in your Toyota vehicle. Toyota rec- ommends the use of approved “Toyota Genuine Motor Oil”. Another motor oil of matching quality can also be used.
Page 437 6-1. Specifications Recommended viscosity (SAE): SAE 0W-20 is filled into your Toyota vehicle at manufacturing, Preferred and the best choice for good fuel economy and good starting in cold weather. Temperature range anticipated before If SAE 0W-20 oil is not available, next oil change SAE 5W-30 oil may be used.
Page 438 6-1. Specifications How to read oil container labels: Either or both API registered marks are added to some oil containers to help you select the oil you should use. API Service Symbol Top portion: The oil quality desig- nation by API (American Petro- leum Institute) (SN) Center portion: The SAE viscosity grade (SAE 0W-20)
Page 439 Capacity Vehicles with a manual transmission 7.2 L (7.6 qt., 6.3 Imp. qt.) Use either of the following. • “TOYOTA Genuine 50/50 Pre-mixed Super Long Life Coolant BLUE” • Similar high-quality ethylene glycol-based non- Coolant type silicate, non-amine, non-nitrite, and non-borate coolant with long-life hybrid organic acid technol- Do not use plain water alone.
Page 440 • Other LSD gear oil that meets API GL-5 and SAE 75W-85 : Your Toyota vehicle is filled with “Toyota Genuine Differential Gear Oil” at the factory. Use Toyota approved “Toyota Genuine Differential Gear Oil” or an equivalent of matching quality to satisfy the above specification. Please con- tact any authorized Toyota dealer or repairer, or another duly qualified and equipped professional for further details.
Page 441 6-1. Specifications NOTICE  Differential gear oil Using a differential gear oil other than “Toyota Genuine Differential Gear Oil” may cause occurrences of rattling noises while idling and poor fuel con- sumption. Never use different brands together. Automatic transmission Fluid capacity* 7.5 L (7.9 qt., 6.6 Imp.
Page 442 SAE 75W-90 specifications NOTICE  Manual transmission gear oil Using a manual transmission gear oil other than “TOYOTA Genuine MG Gear Oil special II” may cause occurrences of rattling noises while idling and poor fuel consumption. Never use different brands together.
Page 443 6-1. Specifications Brakes Pedal clearance 55.0 mm (2.16 in.) min. 0.5  2.0 mm (0.020  0.079 in.) Pedal free play 7  8 clicks Parking brake lever travel SAE J1703 or FMVSS No.116 DOT 3 or Fluid type SAE J1704 or FMVSS No.116 DOT 4 : Minimum pedal clearance when depressed with a force of 490 N (50 kgf, 110 lbf) while the engine is running.
Page 444 6-1. Specifications Light bulbs Light Bulbs Type Headlights High beam (halogen bulbs) Low/high beam (discharge bulbs) Low beam (halogen bulbs) Front turn signal lights Front position lights (vehicles with halogen headlights)  Daytime running lights Front fog lights (vehicles with discharge head- Exterior ...
Page 445  Fuel tank opening for unleaded gasoline To help prevent incorrect fueling, your Toyota has a fuel tank opening that only accommodates the special nozzle on unleaded fuel pumps.  If your engine knocks ...
Page 446 The use of these fuels will damage the vehicle's fuel system. In case of any doubt, ask any authorized Toyota dealer or repairer, or another duly qualified and equipped professional.
Page 447: Customization Customizable Features
Your vehicle includes a variety of electronic features that can be per- sonalized to your preferences. Programming these preferences requires specialized equipment and may be performed by any autho- rized Toyota dealer or repairer, or another duly qualified and equipped professional. Some function settings are changed simultaneously with other functions being customized.
Page 448 6-2. Customization Customized Item Function Default setting setting Push and hold Wireless (long) remote con- Trunk unlocking opera- Push and hold One short push trol tion (short)  P. 51) Two short pushes Automatic light control Light sensor sensitivity ±0% -40% to +40% system (P.
Page 449 Index Abbreviation list ...... 450 Alphabetical index....451 What to do if......462...
Page 450 Abbreviation list Abbreviation/Acronym list ABBREVIATIONS MEANING Anti-lock Brake System Accessory AI-SHIFT Artificial Intelligence Shift Child Restraint System DISP Display Electronic Control Unit Event Data Recorder Emergency Locking Retractor Electric Power Steering Light Emitting Diode Limited Slip Differential Supplemental Restraint System TPMS Tire Pressure Warning System Traction Control...
Page 451: Alphabetical Index
Alphabetical index Alphabetical index A/C........240, 248 Anti-lock brake system ... 225 ABS ........... 225 Ashtray ........270 Air conditioning filter ....328 Audio input....... 258 Air conditioning system Audio system Air conditioning filter....328 Audio input......258 Automatic air conditioning AUX port .......
Page 452 Alphabetical index Back-up lights Care ® Replacing light bulbs..... 343 Alcantara ......289 Wattage......... 444 Exterior ......... 282 Battery Interior........285 Checking ....... 308 Seat belts......286 If the vehicle has a Chains........233 discharged battery ....418 Child restraint system Preparing and checking Baby seats, definition....
Page 453 Alphabetical index Child safety Daytime running light Airbag precautions ....125 system........211 Battery precautions ..311, 421 Defogger Child restraint system ... 133 Rear window ......256 How your child should Side mirror ......256 wear the seat belt ....73 Dimension ........
Page 454 Alphabetical index Electric power steering ... 225 Engine Electronic key Compartment ......301 If the electronic key does Engine switch....169, 178 not operate properly ... 414 Hood ........297 Emergency flashers How to start the Switch ........362 engine......169, 178 Emergency, in case of Identification number ....
Page 455 Alphabetical index Floor mat ........275 Gauges ........194 Fluid Glove box ......... 262 Washer........312 Fog lights Hazard lights Replacing light bulbs..... 343 Switch ........362 Switch ........215 Head restraints Wattage......... 444 Adjusting ........ 69 Front fog lights Headlight cleaner.....
Page 456 Alphabetical index Identification Keyless entry ......51 Engine........433 Keys Vehicle ........433 Electronic key ......30 Ignition switch....169, 178 Engine switch....169, 178 Ignition switch light If you lose your keys ..... 413 Ignition switch light....259 If your electronic key Illuminated entry system..
Page 457 Alphabetical index Maintenance Parking brake......192 Do-it-yourself maintenance ... 294 Power outlets ......271 Maintenance data ....432 Power windows......83 Maintenance requirements ... 291 Manual air conditioning Radiator ........307 system ........240 Rear fog lights Manual transmission ....188 Replacing light bulbs.....
Page 458 Alphabetical index Seat belts Shift lock system ..... 412 Adjusting the seat belt..... 71 Side airbags ......104 Child restraint system Side mirror installation......141 Adjusting and folding ....80 Cleaning and maintaining Side turn signal lights the seat belts ...... 286 Replacing light bulbs.....
Page 459 Alphabetical index Sun visors ........ 266 Tachometer Switch Tachometer......194 Airbag manual on/off..... 151 Tail lights Driving mode selector Switch ........208 switch........183 Theft deterrent system Emergency flasher switch ..362 Double locking system..100 Engine switch....169, 178 Engine immobilizer system ..
Page 460 Alphabetical index USB port ........258 Warning buzzers Electric power steering ..373 Seat belt reminder ....375 Vanity lights Warning lights Vanity lights......267 Automatic headlight Wattage......... 444 leveling system....373 Vanity mirrors ......267 Automatic transmission Vehicle identification fluid temperature number ........
Page 461 Alphabetical index Washing and waxing ....282 Wheels ........325 Window glasses ......83 Window lock switch....83 Windows Power windows ....... 83 Rear window defogger ..256 Washer........217 Windshield wipers ....217 Wireless remote control key Locking/Unlocking....51 Replacing the battery ....
Page 462 What to do if... What to do if... P. 384 If you have a flat tire A tire punctures P. 393 P. 409 If the engine will not start The engine does not start P. 91 Engine immobilizer system P. 418 If the battery is discharged If the shift lever cannot be shifted The shift lever cannot be...
Page 463: Warning Lights
What to do if... Warning lights Brake system warning Automatic headlight leveling sys- light tem warning light P. 372 P. 373 Cruise control indicator Charging system warn- light ing light P. 372 P. 373 Low engine oil pressure Open door warning light warning light P.
Page 464: Gas Station Information
GAS STATION INFORMATION Fuel filler door Trunk opener Auxiliary catch lever P. 87 P. 58 P. 297 Tire inflation pressure Fuel filler door opener Hood lock release lever P. 443 P. 87 P. 297 Fuel tank capacity 50 L (13.2 gal., 11.0 Imp. gal.) (Reference) Unleaded gasoline only Fuel type...

Toyota GT86 Owner's Manual

Key Information

Opening, Closing and Locking the Doors and Trunk

Adjustable Components (Seats, Mirrors, Steering Wheel) Front Seats

Opening and Closing the Windows

Refueling Opening the Fuel Tank Cap

Theft Deterrent System Engine Immobilizer System

Safety Information

Driving Procedures

Instrument Cluster Gauges and Meters

Quick Links

TABLE OF CONTENTS

Related Manuals for Toyota GT86

Summary of Contents for Toyota GT86

Table of Contents