Toyota GR Supra Owner's Manual page 120

120
4-1. CONTROLS
Setting
With a stationary vehicle
Pull the switch.
The LED lights up.
The indicator light in the
instrument cluster illumi-
nates red. The parking
brake is set.
While driving
General information
■
The indicator light in the
instrument cluster illumi-
nates red, a signal
sounds, and the brake
lights illuminate.
To use as emergency brake
while driving.
Pull the switch and hold it. The
vehicle brakes hard while the
switch is being pulled.
A vehicle message is displayed.
The parking brake is engaged
when the vehicle is stationary.
Releasing
Releasing manually
1
Switch on drive-ready state.
2
Press the switch while
the brake is pressed or selec-
tor lever position P is set.
The LED and indicator light go out.
The parking brake is released.
Supra Owner's Manual
Automatic release
The parking brake is released
automatically when you drive
away.
The LED and indicator light go
out.
Malfunction
In the event of a failure or mal-
function of the parking brake:
Secure the vehicle against roll-
ing away, for instance with a
wheel chock, after existing the
vehicle.
After a power failure
To reestablish parking brake
functionality after a power fail-
ure:
1
Switch on standby state.
2
Pull the switch while
stepping on the brake pedal
or selector lever position P is
set and then push.
This process may take a few
seconds. Any sounds associ-
ated with this are normal.
The indicator light is no
longer illuminated as
soon as the parking
brake is ready for oper-
ation again.