Table of Contents

Advertisement

Pictorial index
For safety
and security
Vehicle status
information and
indicators
Before driving
Driving
Interior features
Maintenance
and care
When trouble
arises
Vehicle
specifications
For owners
Index
GR COROLLA_U
Search by illustration
Make sure to read through them
(Main topics: Child seat, theft deterrent system)
Reading driving-related information
(Main topics: Meters, multi-information display)
Opening and closing the doors and windows,
adjustment before driving
(Main topics: Keys, doors, seats)
Operations and advice which are necessary for
driving
(Main topics: Starting engine, refueling)
Usage of the interior features
(Main topics: Air conditioner, storage features)
Caring for your vehicle and maintenance
procedures
(Main topics: Interior and exterior, light bulbs)
What to do in case of malfunction and emergency
(Main topics: Battery discharge, flat tire)
Vehicle specifications, customizable features
(Main topics: Fuel, oil, tire inflation pressure)
Reporting safety defects for U.S. owners, and seat
belt, SRS airbag and headlight aim instructions for
Canadian owners
Search by symptom
Search alphabetically
1
2
3
4
5
6
7
8
9 9

Advertisement

Table of Contents
loading

Summary of Contents for Toyota GR Corolla

  • Page 1 Pictorial index Search by illustration For safety Make sure to read through them and security (Main topics: Child seat, theft deterrent system) Vehicle status Reading driving-related information information and (Main topics: Meters, multi-information display) indicators Opening and closing the doors and windows, Before driving adjustment before driving (Main topics: Keys, doors, seats)
  • Page 2: Table Of Contents

    TABLE OF CONTENTS For your information ......3-2. Opening, closing and locking the doors Reading this manual ......11 How to search........12 Side doors......89 Pictorial index ........13 Back door......93 Smart key system ....96 For safety and security 3-3. Adjusting the seats Front seats ......
  • Page 3 Opening the fuel tank cap .. Other interior features ..4-5. Using the driving support sys- tems Maintenance and care Toyota Safety Sense 3 software update ......6-1. Maintenance and care Toyota Safety Sense 3.0 ..Cleaning and protecting the PCS (Pre-Collision System) vehicle exterior....
  • Page 4 TABLE OF CONTENTS Wheels ....... Vehicle specifications Air conditioning filter... Electronic key battery..Checking and replacing fuses 8-1. Specifications ......... Maintenance data (fuel, oil level, Light bulbs......etc.) ........Fuel information ....When trouble arises Tire information ....8-2. Customization Customizable features ..
  • Page 5: For Your Information

    Because of Toyota's may cause to, or adverse effect interest in continual product they may have on, your Toyota improvement, Toyota reserves vehicle. the right to make changes to this This vehicle should not be modi-...
  • Page 6: Frequently Asked Questions

    Toyota does not make any Certain data, such as the follow- guarantees for problems caused ing, is recorded depending on...
  • Page 7 In addition to the above, Toyota pose by third parties may disclose the data recorded by Data recorded by the computers the Toyota Safety Sense 3.0 to a may be used for collision analy- third party in the following situa-...
  • Page 8  When providing data to a If you wish to stop the collection of Toyota Safety Sense 3.0 data by the company involved in autono- Toyota servers for the purpose of mous driving software, etc. for...
  • Page 9 • How fast the vehicle was trav- government agency eling. • For use by Toyota in a lawsuit These data can help provide a However, if necessary, Toyota may: better understanding of the cir- •...
  • Page 10 Toyota have impaired your ability to oper- dealer before you scrap your ate your vehicle. Alcohol and cer- vehicle.
  • Page 11: Reading This Manual

    Reading this manual Symbols Meanings Indicates the action Explains symbols used in (pushing, turning, etc.) used to operate this manual. switches and other devices. Symbols in this manual Indicates the out- come of an operation Symbols Meanings (e.g. a lid opens). WARNING: Explains something that, if not obeyed,...
  • Page 12: How To Search

    Searching by title ■ How to search  Table of contents: P.2 Searching by name ■  Alphabetical index: P.395 Searching by installation ■ position  Pictorial index: P.13 Searching by symptom or ■ sound  What to do if... (Troubleshoot- ing): P.392...
  • Page 13: Pictorial Index

    Pictorial index Pictorial index ■Exterior Side doors ................P.89 Locking/unlocking ..............P.89 Opening/closing the side windows ........P.111 Locking/unlocking by using the mechanical key ....P.341 Warning messages ..............P.92 Back door ................P.93 Locking/unlocking ..............P.94 Warning messages ..............P.95 Outside rear view mirrors ..........
  • Page 14 Pictorial index Refueling method ..............P.146 Fuel type/fuel tank capacity ..........P.354 Tires..................P.277 Tire size/inflation pressure ........... P.358 Winter tires/tire chains ............P.210 Checking/rotation/tire pressure warning system ....P.277 Coping with flat tires............. P.329 Hood ..................P.265 Opening ................P.265 Engine oil ................
  • Page 15 Pictorial index ■Instrument panel Engine switch ..............P.127 Starting the engine/changing the modes ......P.127 Emergency stop of the engine ..........P.308 When the engine will not start ..........P.339 Warning messages .............. P.325 Shift lever................P.131 Changing the shift position........... P.131 Precautions for towing ............
  • Page 16 Pictorial index Applying/releasing..............P.134 Precautions for winter season..........P.211 Warning buzzer/message ..........P.134, 316 Turn signal lever..............P.133 Headlight switch ..............P.136 Headlights/parking lights/tail lights/side marker lights/ daytime running lights ............P.136 Fog lights ................P.141 Windshield wiper and washer switch....... P.142 Rear window wiper and washer switch ......
  • Page 17 Pictorial index ■Switches Instrument panel light control dial ........P.76 Automatic High Beam switch ........... P.138 “ODO TRIP” switch .............. P.75 Heated steering wheel switch .......... P.222 Windshield wiper de-icer switch ........P.220 “iMT” (Intelligent Manual Transmission) switch ..... P.132 Outside rear view mirror switch ........
  • Page 18 Pictorial index Meter control switches ............P.77 Telephone switch Cruise control switches Dynamic radar cruise control ..........P.177 Cruise control ............... P.185 LTA (Lane Tracing Assist) switch ........P.165 Audio remote control switches Talk switch : Refer to “MULTIMEDIA OWNER’S MANUAL”. Seat heater switches ............
  • Page 19 Pictorial index Wireless charger switch ........... P.231 Drive mode select switch ..........P.202 VSC OFF switch ..............P.205 AWD mode select switch........... P.203 : If equipped...
  • Page 20 Pictorial index ■Interior SRS airbags ................P.31 Floor mats................P.24 Front seats................P.101 Head restraints ..............P.103 Seat belts ................P.27 Open trays ................P.227 Inside lock buttons .............. P.92 Cup holders ................ P.226 Rear seats ................P.102...
  • Page 21 Pictorial index ■Ceiling Inside rear view mirror ............P.108 Sun visors................P.235 Vanity mirrors ..............P.236 Vanity lights ................ P.236 Interior lights/personal lights ........... P.223 “SOS” button................ P.60 Assist grips ................ P.236 Microphone................P.60...
  • Page 22 Pictorial index...
  • Page 23: For Safety And Security

    For safety and security 1-1. For safe use Before driving....24 For safe driving ....25 Seat belts .......27 SRS airbags ....31 Front passenger occupant classification system ..40 Exhaust gas precautions ........45 1-2. Child safety Riding with children ..46 Child restraint systems... 1-3.
  • Page 24: Before Driving

    Do not use floor mats designed (clips) into the floor mat eye- for other models or different model year vehicles, even if lets. they are Toyota Genuine floor mats. ● Only use floor mats designed for the driver’s seat. ●...
  • Page 25: For Safe Driving

    1-1. For safe use For safe driving WARNING ■ Before driving For safe driving, adjust the Check that the floor mat is ● securely fixed in the correct seat and mirror to an appro- place with all the provided priate position before driv- retaining hooks (clips).
  • Page 26 1-1. For safe use Correct use of the seat WARNING belts ■ For safe driving Observe the following precau- Make sure that all occupants are tions. wearing their seat belts before Failure to do so may result in death or serious injury. driving the vehicle.
  • Page 27: Seat Belts

    If the seat belt is not worn prop- ● Toyota recommends that chil- erly, not only the pregnant dren be seated in the rear seat woman, but also the fetus could and always use a seat belt...
  • Page 28 Have any necessary repairs carried ■ Seat belt extender out by your Toyota dealer. Inap- If your seat belts cannot be fastened propriate handling may lead to securely because they are not long incorrect operation.
  • Page 29 1-1. For safe use WARNING ■ Emergency locking retractor (ELR) ● Do not use the seat belt extender when installing a child The retractor will lock the belt during restraint system because the a sudden stop or on impact. It may belt will not securely hold the also lock if you lean forward too child restraint system, increas-...
  • Page 30 In this situation, the seat occupants by retracting the seat belt cannot be used and must be replaced by your Toyota belts when the vehicle is sub- dealer. jected to certain types of severe frontal or side collision or a vehi- cle rollover.
  • Page 31: Srs Airbags

    1-1. For safe use SRS airbags The SRS airbags inflate when the vehicle is subjected to cer- tain types of severe impacts that may cause significant injury to the occupants. They work together with the seat belts to help reduce the risk of death or serious injury. SRS airbag system Location of the SRS airbags ■...
  • Page 32 1-1. For safe use SRS rear side airbags Can help protect the torso of occupants in the rear outer seats SRS curtain shield airbags • Can help protect primarily the head of occupants in the outer seats • Can help prevent the occupants from being thrown from the vehicle in the event of vehicle rollover SRS airbag system components ■...
  • Page 33 1-1. For safe use SRS warning light Front impact sensors Airbag sensor assembly Your vehicle is equipped with ADVANCED AIRBAGS designed based on the US motor vehicle safety standards (FMVSS208). The airbag sensor assembly (ECU) controls airbag deployment based on information obtained from the sensors etc.
  • Page 34 1-1. For safe use ● Depending on the type of collision, it is possible that only the seat belt pretensioners will activate. ● The SRS seat cushion airbag on the front passenger seat will not operate if the occupant is not wearing a seat belt.
  • Page 35 In the following cases, the vehicle compartment will require inspection and/or repair. ● Collision from the side at an angle Contact your Toyota dealer as soon as possible. ● Any of the SRS airbags have been inflated. ●...
  • Page 36 1-1. For safe use scratched, cracked, or otherwise WARNING damaged. ■ SRS airbag precautions Observe the following precautions regarding the SRS airbags. Failure to do so may cause death or serious injury. ● The driver and all passengers in the vehicle must wear their seat belts properly.
  • Page 37 Toyota strongly recom- The seat should be adjusted as mends that all infants and chil- recommended by NHTSA above, dren be placed in the rear seats...
  • Page 38 1-1. For safe use ● Do not attach anything to areas WARNING such as a door, windshield, side ● Do not lean against the door, windows, front or rear pillar, roof the roof side rail or the front, side rail and assist grip. (Except side and rear pillars.
  • Page 39 ● Modifications to the vehicle’s and rear pillar garnishes, are suspension system damaged or cracked, have them replaced by your Toyota ● Installation of electronic devices dealer. such as mobile two-way radios and CD players ●...
  • Page 40: Front Passenger Occupant Classification System

    1-1. For safe use Front passenger occupant classification system Your vehicle is equipped with a front passenger occupant classification system. This system detects the conditions of the front passenger seat and activates or deactivates the front passenger airbag and seat cushion airbag. System components SRS warning light Front passenger seat belt reminder light...
  • Page 41 Do not kick the front passenger seat or subject it to severe impact. Otherwise, the SRS warning light may come on to indicate a malfunction of the front passenger occupant clas- sification system. In this case, contact your Toyota dealer immediately.
  • Page 42 1-1. For safe use WARNING ● Child restraint systems installed on the rear seat should not con- tact the front seatbacks. ● Do not use a seat accessory, such as a cushion and seat cover, that covers the seat cushion surface. ●...
  • Page 43 1-1. For safe use Child restraint system with infant ■ “AIR BAG ON” and “AIR BAG “AIR BAG OFF” OFF” indicator lights Indicator/warning SRS warning light light Front passenger’s seat belt or flashing reminder light Front passenger airbag Devices Deactivated Front passenger seat cushion air- Unoccupied ■...
  • Page 44 1-1. For safe use ible seat, the system may not recognize him/her as a child. Factors which may affect this can be the physique or posture. : Never install a rear-facing child restraint system on the front passenger seat. A forward-facing child restraint system should only be installed on the front passenger seat when it is unavoidable.
  • Page 45: Exhaust Gas Precautions

    Toyota dealer. WARNING Exhaust gases include harmful carbon monoxide (CO), which is colorless and odorless. Observe the following precautions.
  • Page 46: 1-2. Child Safety

    1-2. Child safety Riding with children 1-2.Child safety WARNING ■ When children are in the vehi- Observe the following pre- Never leave children unattended cautions when children are in the vehicle, and never allow in the vehicle. children to have or use the key. Use a child restraint system Children may be able to start the appropriate for the child,...
  • Page 47: Child Restraint Systems

    1-2. Child safety Child restraint sys- Points to remember tems The laws of all 50 states of the U.S.A. as well as Canada now Before installing a child require the use of child restraint restraint system in the vehi- systems. cle, there are precautions ...
  • Page 48 1-2. Child safety WARNING ● Toyota strongly urges the use of a proper child restraint system that conforms to the weight and size of the child, installed on the rear seat. According to accident statistics, the child is safer when properly restrained in the rear seat than in the front seat.
  • Page 49 1-2. Child safety Child restraint system Types of child restraint system installation methods ■ Confirm with the operation manual enclosed with the child restraint system about the installation of the child restraint system. Installation method Page Seat belt attachment P.52 Child restraint LATCH P.56 anchors attachment...
  • Page 50 1-2. Child safety install the child restraint system: ● Never install a rear-facing child restraint system on the front  Move the front seat fully rear- passenger seat even if the “AIR ward. BAG OFF” indicator light is illu- minated. In the event of an acci- ...
  • Page 51 1-2. Child safety ● Do not allow the child to lean WARNING his/her head or any part of ● A forward-facing child restraint his/her body against the door or system may be installed on the the area of the seat, front or rear front passenger seat only when pillars, or roof side rails from it is unavoidable.
  • Page 52 1-2. Child safety buckle. Make sure that the WARNING belt is not twisted. ● Adjust the front passenger seat so that it does not interfere with the child restraint system. Child restraint system fixed with a seat belt A child restraint system for a small child or baby must itself be properly restrained on the seat Fully extend the shoulder belt...
  • Page 53 1-2. Child safety Place the child restraint sys- check that it cannot be extended. tem on the seat facing the front of the vehicle. After installing the child restraint system, rock it back and forth to ensure that it is Run the seat belt through the installed securely.
  • Page 54 1-2. Child safety seat, allow the shoulder belt removed, remove the head to retract until the child restraint. (P.103) restraint system is securely in Place the child restraint sys- place. tem on the seat facing the front of the vehicle. After the shoulder belt has retracted to a point where there is Booster type...
  • Page 55 1-2. Child safety low as possible. (P.27) ● Do not allow children to play with the seat belt. If the seat belt becomes twisted around a child’s neck, it may lead to choking or other serious injuries that could result in death. If this occurs and the buckle cannot be unfastened, scissors should be used to cut the belt.
  • Page 56 1-2. Child safety WARNING ● When installing a child restraint system in the rear center seat, adjust both seat cushions to the same position and align both seatbacks at the same angle. Otherwise, the child restraint system cannot be securely restrained and this may cause death or serious injuries in the event of sudden braking, sud-...
  • Page 57 1-2. Child safety the installation, using the top lower connector system. tether strap to latch onto the top tether strap anchor. (P.58) After installing the child restraint system, rock it back and forth to ensure that it is installed securely. (P.55) ■...
  • Page 58 1-2. Child safety Fixing the top tether strap ■ WARNING to the anchor bracket ● When securing some types of Install the child restraint system child restraint systems in rear seats, it may not be possible to in accordance to the operation properly use the seat belts in manual enclosed with the child positions next to the child...
  • Page 59 1-2. Child safety Make sure the top tether strap is ● Follow all installation instruc- securely latched. (P.55) tions provided by the child When installing the child restraint restraint system manufacturer. system with the head restraint being raised, be sure to have the ●...
  • Page 60: 1-3. Emergency Assistance

    Helps drivers in the event of vehicle theft. (P.62) the United States, Toy- otapr.com in Puerto Rico  Emergency Assistance Button and Toyota.ca in Canada. All (“SOS”) use of the Safety Connect Connects drivers to response-cen- service is subject to such ter support.
  • Page 61 A variety of subscription terms Emergency Assistance, Stolen are available for purchase. Con- Vehicle and Enhanced Road tact your Toyota dealer, call the Assistance are not available in the U.S. Virgin Islands. following appropriate Customer For vehicles first sold in the U.S.
  • Page 62 Further information is available In case of either airbag deploy- at Toyota.com in the United ment or severe rear-end colli- States, Toyotapr.com in Puerto sion, the system is designed to Rico and Toyota.ca in Canada.
  • Page 63 Safety Connect Terms and Those standards were based on Conditions, which are available comprehensive and periodic at Toyota.com in the United evaluations of the relevant sci- States, Toyotapr.com in Puerto entific literature. Over 120 scien- Rico and Toyota.ca in Canada.
  • Page 64: 1-4. Theft Deterrent System

    1-4. Theft deterrent system Engine immobilizer 1-4.Theft deterrent system ■ System maintenance system The vehicle has a mainte- nance-free type engine immobilizer system. The vehicle’s keys have ■ Conditions that may cause the built-in transponder chips system to malfunction that prevent the engine from ●...
  • Page 65: Alarm

    1-4. Theft deterrent system The indicator light changes from Alarm being on to flashing when the sys- tem is set. : If equipped The alarm uses light and sound to give an alert when an intrusion is detected. The alarm is triggered in the following situations when the alarm is set: ...
  • Page 66 1-4. Theft deterrent system NOTICE ■ To ensure the system oper- ates correctly Do not modify or remove the sys- tem. If modified or removed, the proper operation of the system cannot be guaranteed. ● A person inside the vehicle opens a door, back door or hood, or Pre-alarm unlocks the vehicle.
  • Page 67: Vehicle Status Information And Indicators

    Vehicle status information and indicators 2-1. Instrument cluster Warning lights and indica- tors .......68 Gauges and meters ..72 Multi-information display ........76 Fuel consumption informa- tion .......83...
  • Page 68: Warning Lights And Indicators

    2-1. Instrument cluster Warning lights and indicators 2-1.Instrument cluster The warning lights and indicators on the instrument cluster and outside rear view mirrors inform the driver of the status of the vehicle’s various systems. Warning lights and indicators displayed on the instru- ment cluster For the purpose of explanation, the following illustrations display all warning lights and indicators illuminated.
  • Page 69 (P.320) which could result in death or seri- PCS warning light ous injury. Have the vehicle (P.320) inspected by your Toyota dealer immediately if this occurs. LTA indicator (P.320) Indicators (Orange) The indicators inform the driver LDA indicator (P.320)
  • Page 70 *1, 2 the lights do not come on, or turn (P.205) off. Have the vehicle inspected TRAC OFF indica- by your Toyota dealer. *1, 2 (P.205) : This light comes on when the Driving assist infor- system is turned off.
  • Page 71 2-1. Instrument cluster lower, this indicator will flash for approximately 10 seconds, then stay on. : This light illuminates on the over- head console.
  • Page 72: Gauges And Meters

    2-1. Instrument cluster Gauges and meters Meter display Locations of gauges and meters ■ 1-dial display  Multi-information display Presents the driver with a variety of vehicle data (P.76) Displays warning messages if a malfunction occurs (P.325) Outside temperature Displays the outside temperature within the range of -40°F (-40°C) to 140°F(60°C) Tachometer Tachometer: Displays the engine speed in revolutions per minute...
  • Page 73 2-1. Instrument cluster Displays driving range with remaining fuel. Non-dial display  Multi-information display Presents the driver with a variety of vehicle data (P.76) Displays warning messages if a malfunction occurs (P.325) Outside temperature Displays the outside temperature within the range of -40°F (-40°C) to 140°F (60°C) Tachometer Tachometer: Displays the engine speed in revolutions per minute...
  • Page 74 ● When “--” or “E” is displayed, the system may be malfunctioning. speed for approximately 1 sec- Take your vehicle to your Toyota ond. dealer. ■ Liquid crystal display P.77 ■...
  • Page 75 2-1. Instrument cluster source code of such FOSS can be Odometer and trip meter found at the following URL. display https://www.denso.com/global/en/op ensource/meter/toyota/ Changing the display ■ ■ Customization Each time the “ODO TRIP” The gauges and meters can be cus-...
  • Page 76: Multi-Information Display

    2-1. Instrument cluster Multi-information dis- Changing the instrument play panel light brightness When the headlights or front Display position lights are on, the bright- ness of the meter and instru- 1-dial display  ment panel lights can be adjusted using the instrument panel brightness dial.
  • Page 77 2-1. Instrument cluster tion display, while any of the follow- ing systems are operating: • LTA (Lane Tracing Assist) • LDA (Lane Departure Alert) • Dynamic radar cruise control ■ Liquid crystal display Small spots or light spots may appear on the display. This phenom- enon is characteristic of liquid crys- tal displays, and there is no problem : Select multi-informa-...
  • Page 78 2-1. Instrument cluster When the setting is complete, press Driving support system ■ information display Select to display the operational status of the following systems:  Dynamic radar cruise control (P.177)  LTA (Lane Tracing Assist) (P.165)  LDA (Lane Departure Alert) (P.170) Content of multi-informa- ...
  • Page 79 2-1. Instrument cluster sure gauge economy.  Drive Info Items  Boost gauge Select to change the display of the  G-force drive information. Changing items to be displayed  TRIP A/B Items on the side multi-information Select to change the display of the displays.
  • Page 80 2-1. Instrument cluster Use the displayed values as a ref- When only a small amount of fuel is erence only. added to the tank, the display may not be updated. When refueling, turn the engine switch off. If the vehicle is refueled without turning the engine switch off, the display may not be updated.
  • Page 81 2-1. Instrument cluster AWD Control ■ were selected in . (P.78)  Average speed: Displays the average vehicle speed since engine start  Trip distance: Displays the distance driven since engine start  Trip time: Displays the elapsed time since engine The illustration used is intended as start an example, and may differ from the...
  • Page 82 2-1. Instrument cluster cle speed, the display may not engine oil temperature exceeds 284 °F (140 °C). show the actual condition of the vehicle. Engine oil pressure gauge Displays the engine oil pressure. A buzzer will sound and warning message will be displayed if the engine oil pressure becomes low.
  • Page 83: Fuel Consumption Information

    2-1. Instrument cluster Fuel consumption Settings display information Vehicle functions and set- ■ tings that can be changed Fuel consumption informa- P.371 tion can be displayed on the audio system screen. Meter display settings ■ P.78 System components ■ Suspension of the settings dis- play ●...
  • Page 84 2-1. Instrument cluster Fuel consumption in the past ■ Updating the history data 15 minutes Update the latest fuel consumption Current fuel consumption by selecting “Update” to measure the current fuel consumption again. Average vehicle speed since ■ Resetting the data the engine was started.
  • Page 85: Before Driving

    Before driving 3-1. Key information Keys .......86 3-2. Opening, closing and locking the doors Side doors......89 Back door.......93 Smart key system ..96 3-3. Adjusting the seats Front seats ....Rear seats....Head restraints.... 3-4. Adjusting the steering wheel and mirrors Steering wheel ....
  • Page 86: Keys

    (P.96) tronic key may be damaged, it is • Operating the wireless remote recommended that replacement is control function (P.87) carried out by your Toyota dealer. Mechanical keys ● To avoid serious deterioration, do not leave the electronic key within Key number plate 3 ft.
  • Page 87 Carry the electronic key 3.9 in. have not had a new electronic key (10 cm) or more away from elec- registered, ask your Toyota dealer to tric appliances that are turned on. check if an unknown electronic key Radio waves emitted from electric (other than those in your posses- appliances within 3.9 in.
  • Page 88 Opens the windows (P.89) (P.341) Sounds the alarm : This setting must be customized at your Toyota dealer. ■ Panic mode When is pressed for longer than about one second, an alarm will sound intermittently and the...
  • Page 89: The Doors

    Holding dows. the driver’s door handle for : This setting must be customized approximately 2 seconds at your Toyota dealer. unlocks all the doors. Grip the front passenger’s door ■ Switching the door unlock func- handle to unlock all the...
  • Page 90 3-2. Opening, closing and locking the doors ■ Security feature Multi-informa- Unlocking func- If a door is not opened within tion display/Beep tion approximately 60 seconds after the Holding the vehicle is unlocked using the entry function or wireless remote control, driver’s door the security feature automatically handle unlocks...
  • Page 91 3-2. Opening, closing and locking the doors ■ If the smart key system or the WARNING wireless remote control does not operate properly ■ To prevent an accident Use the mechanical key to lock and Observe the following precautions unlock the doors. (P.341) while driving the vehicle.
  • Page 92 3-2. Opening, closing and locking the doors The key may not be detected cor- Unlocking and locking the rectly and the door may be locked. doors from the inside ■ Open door warning buzzer If a door or the hood is not fully Door lock switches (to ■...
  • Page 93: Back Door

    3-2. Opening, closing and locking the doors Back door ● Do not allow a child to open or close the back door. Doing so may cause the back The back door can be door to move unexpectedly, or cause the child’s hands, head, locked/unlocked and or neck to be caught by the opened by the following...
  • Page 94 P.90 neck to be caught and injured. When installing an accessory Unlocking and locking the part to the back door, using a genuine Toyota part is recom- back door from the inside mended. Door lock switches ■ P.92...
  • Page 95 ● Do not attach any accessories other than genuine Toyota parts to the back door. Do not place your hand on the ● damper stay or apply lateral forces to it.
  • Page 96: Smart Key System

    3-2. Opening, closing and locking the doors ■ Effective range (areas within Smart key system which the electronic key is detected) The following operations can be performed simply by carrying the electronic key on your person, for example in your pocket. The driver should always carry the electronic key.
  • Page 97 3-2. Opening, closing and locking the doors remote control or mechanical key Correction Situation to unlock the doors. procedure ■ Electronic key battery-saving An attempt was Close all of function made to lock the the doors When battery-saving mode is set, vehicle while a door and lock the battery depletion is minimized by...
  • Page 98 3-2. Opening, closing and locking the doors • Hand warmers made of metal the window or outside door han- • Media such as CDs and DVDs dle, near the ground, or in a high place when the doors are locked ●...
  • Page 99 3-2. Opening, closing and locking the doors ognition signals will be shown up ● Setting the electronic key to bat- to two consecutive times. After tery-saving mode helps to reduce this, no recognition signals will be key battery depletion. (P.97) given.
  • Page 100 Radio waves could have unex- pected effects on the operation of such medical devices. Ask your Toyota dealer for details on disabling the entry function.
  • Page 101: Adjusting The Seats

    3-3. Adjusting the seats Front seats 3-3.Adjusting the seats ■ Seat adjustment ● Be careful that the seat does not hit passengers or luggage. Adjustment procedure ● To reduce the risk of sliding under the lap belt during a colli- sion, do not recline the seat more than necessary.
  • Page 102: Rear Seats

    3-3. Adjusting the seats Rear seats ● Do not allow anyone to sit on a folded seatback or in the lug- gage compartment while driv- The seatbacks of the rear ing. seats can be folded down. ● Do not allow children to enter the luggage compartment.
  • Page 103: Head Restraints

    3-3. Adjusting the seats Head restraints WARNING ● Check that the seat belts are not twisted or caught in the Head restraints are provided seatback. for all seats. If the seat belt gets caught between the seatback’s securing WARNING hook and latch, it may damage the seat belt.
  • Page 104 3-3. Adjusting the seats Rear outside seats ■ ■ Adjusting the rear seat head restraints Always raise the head restraint one level from the stowed position when using. Pull the head restraints up. Down Removing the head restraints Push the head restraint down while pressing the lock release button Front seats ■...
  • Page 105 3-3. Adjusting the seats Rear center seat Rear outside seats ■ ■ Pull the head restraint up while Align the head restraint with the pressing the lock release button installation holes and push it down to the lock position. Press and hold the lock release button when lowering the head restraint.
  • Page 106 3-3. Adjusting the seats...
  • Page 107: Adjusting The Steering Wheel

    3-4. Adjusting the steering wheel and mirrors Steering wheel 3-4.Adjusting the steering wheel and mirrors ■ After adjusting the steering wheel Make sure that the steering wheel Adjustment procedure is securely locked. Otherwise, the steering wheel Hold the steering wheel and may move suddenly, possibly causing an accident, and resulting push the lever down.
  • Page 108: Inside Rear View Mirror

    3-4. Adjusting the steering wheel and mirrors Inside rear view mirror The rear view mirror’s posi- tion can be adjusted to enable sufficient confirma- tion of the rear view. Adjusting the height of Normal position rear view mirror Anti-glare position The height of the rear view mir- ror can be adjusted to suit your driving posture.
  • Page 109: Outside Rear View Mirrors

    3-4. Adjusting the steering wheel and mirrors To adjust the mirror, operate Outside rear view mir- the switch. rors The rear view mirror’s posi- tion can be adjusted to enable sufficient confirma- tion of the rear view. WARNING ■ Important points while driving Observe the following precautions while driving.
  • Page 110 3-4. Adjusting the steering wheel and mirrors...
  • Page 111: Opening And Closing The Win

    3-5. Opening and closing the windows dow frame while the window is clos- Power windows 3-5.Opening and closing the windows ing, window movement is stopped and the window is opened slightly. Opening and closing the ■ Catch protection function power windows If an object becomes caught between the door and window while the window is opening, window...
  • Page 112 If the window reverses and cannot possible for children and other be fully closed or opened, have the passengers to have body parts vehicle inspected by your Toyota caught in the power window. dealer. Also, when riding with a child, it ■...
  • Page 113 3-5. Opening and closing the windows opened and closed using the WARNING driver’s switch even if the lock ● When exiting the vehicle, turn switch is on. the engine switch off, carry the key and exit the vehicle along with the child. There may be accidental operation, due to mischief, etc., that may possibly lead to an accident.
  • Page 114: 3-6. Favorite Settings

    3-6. Favorite settings ® My Settings 3-6.Favorite settings  Bluetooth devices An individual is identified when a ® Drivers are identified using Bluetooth device is connected to the audio system. For information devices such as electronic ® keys to store the vehicle on how to connect Bluetooth devices, refer to the “MULTIMEDIA settings for each.
  • Page 115: Driving

    ........Rear window wiper and 4-6. Driving tips washer....... Winter driving tips..4-4. Refueling Opening the fuel tank cap ........4-5. Using the driving support systems Toyota Safety Sense 3 soft- ware update ....Toyota Safety Sense 3.0 ........
  • Page 116 4-1. Before driving cator is illuminated. Driving the vehicle 4-1.Before driving Shift the shift lever to N. (P.131) The following procedures If parking on a hill, shift the shift should be observed to lever to 1 or R and block the wheels ensure safe driving: as needed.
  • Page 117 4-1. Before driving and the road surface, preventing and/or drum are replaced. Have the steering and brakes from your Toyota dealer perform the bed- operating properly. ding down operation. ■ Restraining the engine output ■ Operating your vehicle in a for-...
  • Page 118 4-1. Before driving ● Do not adjust the positions of WARNING the steering wheel, the seat, or • When backing up, you may twist the inside or outside rear view your body around, leading to a mirrors while driving. difficulty in operating the pedals. Doing so may result in a loss of Make sure to operate the pedals vehicle control.
  • Page 119 Therefore, brake pads may prevent the when replacing the brake pads, brakes from functioning prop- Toyota recommends that you also erly. If the brakes on only one have the thickness of the discs side are wet and not functioning measured.
  • Page 120 4-1. Before driving ■ When taking a nap in the vehi- WARNING • The temperature inside the Always turn the engine off. Other- vehicle may cause the plastic wise, if you accidentally move the lenses and plastic material of shift lever or depress the acceler- glasses to deform or crack.
  • Page 121 Have the vehicle inspected by ■ If you get a flat tire while driv- your Toyota dealer. • Do not rest your foot on the A flat or damaged tire may cause clutch pedal or depress it any the following situations.
  • Page 122: Cargo And Luggage

    4-1. Before driving Cargo and luggage NOTICE ■ When encountering flooded roads or waterlogged roads Take notice of the following Do not drive on a road that has information about storage flooded after heavy rain etc. precautions, cargo capacity Doing so may cause the following and load: serious damage to the vehicle: ●...
  • Page 123 (kg) get on, the available cargo load capacity of your vehicle. and luggage load will be reduced E (P.352) lb. (kg) as follows: Toyota does not recommend towing C lb. (kg) - D lb. (kg) = E a trailer with your vehicle. Your (kg)
  • Page 124 4-1. Before driving • On the dashboard WARNING ■ Things that must not be car- ● Secure all items in the occupant ried in the luggage compart- compartment. ment ■ Capacity and distribution The following things may cause a ● Do not exceed the maximum fire if loaded in the luggage com- axle weight rating or the total...
  • Page 125: Vehicle Load Limits

    150 lb. (68 kg) per person.  Towing capacity Toyota does not recommend tow- ing a trailer with your vehicle.  Cargo capacity Cargo capacity may increase or decrease depending on the weight and the number of occu- pants.
  • Page 126: Dinghy Towing

    4-1. Before driving Dinghy towing Your vehicle is not designed to be dinghy towed (with 4 wheels on the ground) behind a motor home. NOTICE ■ To avoid serious damage to your vehicle Do not tow your vehicle with the four wheels on the ground.
  • Page 127: Driving Procedures

    (P.64) When operating the engine switch, Contact your Toyota dealer. one short, firm press is enough. It is ● If a message related to start-up is not necessary to press and hold the shown on the multi-information switch.
  • Page 128 ● If attempting to restart the engine malfunction. Contact your Toyota immediately after turning the dealer immediately. engine switch off, the engine may not start in some cases. After turn-...
  • Page 129 4-2. Driving procedures Set the parking brake. WARNING (P.134) ■ Stopping the engine in an Check the parking brake indicator emergency is illuminated. ● If you want to stop the engine in Shift the shift lever to N. an emergency while driving the vehicle, press and hold the (P.131) engine switch for more than 2...
  • Page 130 4-2. Driving procedures The emergency flashers can be WARNING used. ● Do not leave the vehicle with the engine running for a long time. If such a situation cannot Some electrical components such be avoided, park the vehicle in as the audio system can be used. an open space and ensure that “ACCESSORY”...
  • Page 131: Manual Transmission

    4-2. Driving procedures Manual transmission Operating instructions Shifting the shift lever ■ ■ Maximum allowable speeds Observe the following maximum allowable speeds in each gear when maximum acceleration is necessary. Shift posi- Maximum speed tion mph (km/h) 37 (60) 59 (95) 86 (139) 114 (183) Depress the clutch pedal...
  • Page 132 4-2. Driving procedures engine speed to suit the driver’s NOTICE operation of the clutch pedal ■ To prevent damage to the and shift lever, helping the driver vehicle to shift gears more smoothly. When shifting gears, observe the Additionally, when the clutch following precautions.
  • Page 133: Turn Signal Lever

    ■ If the “iMT” indicator illumi- nates in amber The iMT may be temporarily unavailable or malfunctioning. Have the vehicle inspected at your Toyota dealer. WARNING ■ Limitations of the iMT iMT is not a system that prevents shift lever operation error or engine overrevving.
  • Page 134: Parking Brake

    4-2. Driving procedures burned out. Parking brake Operating instructions U.S.A. Canada Sets the parking brake Fully pull the parking brake while depressing the brake pedal. The parking brake indicator light will come on. Releases the parking brake Slightly raise the lever and lower it completely while pressing the but- ton.
  • Page 135 4-2. Driving procedures ■ Usage in winter time P.210 NOTICE ■ When parking the vehicle Before you leave the vehicle, shift the shift lever to N, set the parking brake and make sure that the vehicle does not move. (P.116) ■...
  • Page 136: Headlight Switch

    4-3. Operating the lights and wipers Headlight switch 4-3.Operating the lights and wipers (U.S.A.) Off The headlights can be oper- ated manually or automati- ■ AUTO mode can be used when cally. The engine switch is in ON. ■ Daytime running light system Operating instructions ●...
  • Page 137 4-3. Operating the lights and wipers sensor is affixed to the windshield. when the engine switch is turned off Doing so interferes with the sensor the battery saving function will oper- detecting the level of ambient light ate and automatically turn off all the and may cause the automatic head- lights after approximately 20 min- light system to malfunction.
  • Page 138: Ahb (Automatic High Beam)

    4-3. Operating the lights and wipers Pull the lever toward you and AHB (Automatic High release it to flash the high Beam) beams once. You can flash the high beams with The Automatic High Beam the headlights on or off. uses a front camera located on the upper portion of the windshield to detect the...
  • Page 139 4-3. Operating the lights and wipers Turn the headlight switch to • When vehicles ahead are repeat- edly detected and then hidden position. due to repeated curves, road dividers or roadside trees When the headlight switch lever is • When a vehicle ahead in the low beam position, the AHB approaches from a far lane system will be enabled and the...
  • Page 140 4-3. Operating the lights and wipers roundings. This may cause the position quickly 10 times, then low beams to remain on or the leave the lever in its original posi- high beams to flash or dazzle tion. pedestrians or vehicles ahead. In If the sensitivity is changed, the such a case, it is necessary to Automatic High Beam indicator...
  • Page 141: Fog Light Switch

    4-3. Operating the lights and wipers Fog light switch The fog lights secure excel- lent visibility in difficult driv- ing conditions, such as in rain and fog. Operating instructions Temporarily changing to the low beams It is recommended to switch to the low beams when use of the high beams is inappropriate or when the high beams may...
  • Page 142 4-3. Operating the lights and wipers Windshield wipers and (U.S.A.) or (Canada) washer Low speed windshield wiper operation Operating the lever can use (U.S.A.) or (Canada) the windshield wipers or the High speed windshield wiper washer. operation NOTICE (U.S.A.) or (Canada) ■...
  • Page 143: Rear Window Wiper And Washer

    ■ When a nozzle becomes blocked (U.S.A.) or (Canada) In this case, contact your Toyota dealer. Do not try to clear it with a pin or other object. The nozzle will (U.S.A.) or (Canada) be damaged. Intermittent window wiper operation (U.S.A.) or...
  • Page 144 4-3. Operating the lights and wipers ■ When a nozzle becomes blocked In this case, contact your Toyota dealer. Do not try to clear it with a pin or other object. The nozzle will be damaged. Washer/wiper dual operation Pushing the lever operates the wiper and washer.
  • Page 145: Refueling

    4-4. Refueling Opening the fuel tank 4-4.Refueling ● After exiting the vehicle and before opening the fuel door, touch an unpainted metal sur- face to discharge any static electricity. It is important to dis- Perform the following steps charge static electricity before to open the fuel tank cap: refueling because sparks result- ing from static electricity can...
  • Page 146 ■ When replacing the fuel tank Do not use anything but a genu- ine Toyota fuel tank cap designed for your vehicle. Doing so may cause a fire or other incident which may result in death or seri- ous injury.
  • Page 147: 4-5. Using The Driving Support Systems

    WARNING be able to be performed wire- lessly. ■ For safe use When the Toyota Safety Sense 3 Checking your vehicle’s software is updated, the operating methods of functions may Toyota Safety Sense 3 change. Using this system without...
  • Page 148 ON. ● Toyota Safety Sense 3 can still be used while a software update is being performed. What can be checked using the ■...
  • Page 149: Toyota Safety Sense 3.0

    If attention is necessary while performing driving operations or a system malfunction occurs, a warning message or warning buzzer will be operated. If a The Toyota Safety Sense 3.0 warning message is displayed consists of the driving on the display, follow the instructions displayed.
  • Page 150 P.185 ● When accessories which obstruct a sensor or light are Sensors used by Toyota temporarily installed to the vehi- Safety Sense 3.0 ● When a compact spare tire or Various sensors are used to...
  • Page 151 • If the inner side of the wind- or front bumper has been sub- shield where the front camera is jected to a impact, have the vehi- installed is dirty, contact your cle inspected by your Toyota Toyota dealer. dealer. ● Do not disassemble the radar sensors.
  • Page 152 For details, contact your Toyota wipers, replace the wiper insert dealer. or wiper blade. ●...
  • Page 153 4-5. Using the driving support systems ● When the brightness of the sur- WARNING rounding area changes suddenly ■ Front camera installation area ● When driving near a TV tower, on the windshield broadcasting station, electric power plant, radar equipped vehi- If the system determines that the cles, etc., or other location where windshield may be fogged up, it...
  • Page 154 4-5. Using the driving support systems faces, such as when it is covered with ice, snow, gravel, etc. ● When the course of the vehicle differs from the shape of a curve ● When the vehicle speed is exces- sively high when entering a curve ●...
  • Page 155: Pcs (Pre-Collision System)

    4-5. Using the driving support systems be heard and the brake pedal PCS (Pre-Collision Sys- response may change, but this tem) does not indicate a malfunction. ● When the system is operating, the brake pedal may feel stiffer than The pre-collision system expected or sink.
  • Page 156 4-5. Using the driving support systems : Detected as a detectable object WARNING only when being ridden. ■ For safe use Driving safely is solely the ● System functions responsibility of the driver. Pay careful attention to the sur- Pre-collision warning ■...
  • Page 157 4-5. Using the driving support systems Pre-collision brake assist ■ If the system determines that the possibility of a collision is high and the brake operation by the driver is insufficient, the braking power will be increased. Pre-collision brake control ■...
  • Page 158 4-5. Using the driving support systems ● The pre-collision braking func- tion is not designed to hold the vehicle stopped. If the vehicle is stopped by pre-collision brake control, the driver should oper- ate the brakes immediately as necessary. ● The pre-collision braking func- tion may not operate if certain operations are performed by the...
  • Page 159 4-5. Using the driving support systems WARNING • While the emergency steering assist is operating, if the accel- erator pedal is depressed strongly, the steering wheel is turned heavily, or the brake pedal is depressed, the system may determine that the driver is taking evasive action and emer- gency steering assist operation may be canceled.
  • Page 160 4-5. Using the driving support systems Relative speed between Detectable objects Vehicle speed your vehicle and object Preceding motorcycles, Approximately 3 to 110 Approximately 3 to 50 stopped motorcycles mph (5 to 180 km/h) mph (5 to 80 km/h) Approximately 20 to 110 Approximately 20 to 110 Oncoming motorcycles mph (30 to 180 km/h)
  • Page 161 4-5. Using the driving support systems • The accelerator pedal is strongly depressed • The steering wheel is operated heavily or suddenly ● Emergency steering assist The emergency steering assist will not operate when the turn signal lights are flashing. The emergency steering assist will not operate when the VSC OFF indicator is illuminated.
  • Page 162 4-5. Using the driving support systems Relative speed Detectable Crossing vehicle Vehicle speed between your objects speed vehicle and object • Your vehicle Approximately 3 speed or less Approximately 3 Vehicles (side) to 38 mph (5 to • Approximately to 38 mph (5 to 60 km/h) 25 mph (40 60 km/h)
  • Page 163 4-5. Using the driving support systems ■ Situations in which the system may not operate properly ● In certain situations, such as the following, a detectable object may not be detected by the front sen- sors, and the system may not operate properly: •...
  • Page 164 4-5. Using the driving support systems long skirt, etc.) lowing, the emergency steering • When a pedestrian or bicycle is assist may not operate properly: bending forward or squatting • When a detectable object is too • When a pedestrian or bicycle is close to the vehicle moving at high speed •...
  • Page 165: Lta (Lane Tracing Assist)

    4-5. Using the driving support systems not operate in most cases. LTA (Lane Tracing Assist)  When the dynamic radar cruise control is operating, the pre-collision warning will LTA functions operate at the “Earlier” timing,  When driving on a road with regardless of the user setting.
  • Page 166 4-5. Using the driving support systems  When the function is operat- WARNING ing, if the vehicle is likely to ■ Before using the LTA system depart from its lane, the driver ● Do not overly rely on the LTA will be alerted via a display system.
  • Page 167 4-5. Using the driving support systems the following conditions are met: from the lane while the LTA is operating, the warning buzzer will ● The LTA system detects lane lines sound to alert the driver. or the path of preceding or sur- rounding vehicles (except when ●...
  • Page 168 4-5. Using the driving support systems Enabling/disabling the ● When a preceding or surround- ing vehicle is swaying (Your system vehicle may sway accordingly and depart from the lane) The LTA will change between ● When a preceding or surround- enabled/disabled each time the ing vehicle departs from a lane LTA switch is pressed.
  • Page 169 4-5. Using the driving support systems Operation display of steering wheel operation support The operating state of the LTA system is indicated. Lane dis- Steering Indicator Situation play icon LTA is on standby White Grey Grey LTA is operating Green Green Green The vehicle is departing the lane...
  • Page 170: Lda (Lane Departure Alert)

    4-5. Using the driving support systems such as a curb, guardrail, etc. LDA (Lane Departure Alert) Basic functions The LDA system warns the driver if the vehicle may deviate from the current lane or course and also can slightly operate the steering wheel to help avoid deviation from the lane or course...
  • Page 171 4-5. Using the driving support systems : Boundary between the asphalt and grass, soil, etc., or structures, such as a curb, guardrail, etc. WARNING ■ Before using the LDA system ● Do not overly rely on the LDA Break suggestion function ■...
  • Page 172 4-5. Using the driving support systems This function is operable when all of ■ Operation of the lane departure the following conditions are met: alert function/lane departure • The vehicle speed is approxi- prevention function mately 30 mph (50 km/h) or more. ●...
  • Page 173 4-5. Using the driving support systems Changing LDA settings  The LDA system can be enabled/disabled through a customize setting. (P.371)  The settings of the LDA can be changed on the customize ● When the system determines that settings. (P.371) the driver is not securely holding the steering wheel, or the steering WARNING...
  • Page 174 4-5. Using the driving support systems Displays and system operation The operating state of the lane departure alert function and steering assist operation of the lane departure prevention function are indi- cated. Lane dis- Steering Indicator Situation play icon Not illumi- Not illumi- Not illumi- System disabled...
  • Page 175: Rsa (Road Sign Assist)

    4-5. Using the driving support systems detects a sign or information RSA (Road Sign of a sign is available from the Assist) navigation system, the sign will be displayed on the dis- : If equipped play. The RSA system detects ...
  • Page 176 4-5. Using the driving support systems ● When a sign is immediately after a ■ Operating conditions of the freeway junction or in an adjacent notification functions lane just before merging ● Excess speed notification function ● When stickers are attached to the rear of a preceding vehicle This function will operate when the following condition is met:...
  • Page 177 4-5. Using the driving support systems Dynamic radar cruise control Stop This dynamic radar cruise control detects the pres- Yield ence of vehicles ahead, determines the current vehi- cle-to-vehicle distance, and Warning operates to maintain a suit- able distance from the vehi- ...
  • Page 178 4-5. Using the driving support systems The dynamic radar cruise control WARNING determines whether the distance ● Set the speed appropriately between the driver’s own vehicle according to the speed limit, and a designated preceding vehi- traffic flow, road conditions, cle is within a set range.
  • Page 179 4-5. Using the driving support systems Basic functions Constant speed cruising: When there are no vehicles ahead The vehicle drives at the speed set by the driver. If the set vehicle speed is exceeded while driving down a hill, the set vehicle speed display will blink and a buzzer will sound.
  • Page 180: Cruise Control

    4-5. Using the driving support systems System Components Using the dynamic radar cruise control Meter display ■ Setting the vehicle speed Press the driving assist mode select switch to select dynamic radar cruise control. The dynamic radar cruise control indicator will illuminate. Multi-information display Set vehicle speed Indicators...
  • Page 181 4-5. Using the driving support systems Long press adjustment: Increases Adjusting the set vehicle or decreases in 5 km/h (3.1 mph) or speed 5 mph (8 km/h) increments continu- ously while the switch is pressed  Adjusting the set vehicle and held speed using the switches ...
  • Page 182 4-5. Using the driving support systems Changing the vehicle-to-vehicle distance Each time the switch is pressed, the vehicle-to-vehicle distance setting will change as follows: If a preceding vehicle is detected, the preceding vehicle mark will be displayed. Illustration Vehicle-to-vehicle Approximate Distance (Vehicle Number distance Speed: 60 mph [100 km/h])
  • Page 183 4-5. Using the driving support systems ● When the brake control or output As the sensor may not be able to restriction control of a driving sup- correctly detect a vehicle, the sys- port system operates tem may not operate properly. (For example: Pre-Collision Sys- ●...
  • Page 184 4-5. Using the driving support systems approximately 50 mph (80 km/h) Curve speed reduction or more and a lane change to function the passing lane is performed, when the turn signal lever is When a curve is detected, the operated and the lane is vehicle speed will begin being changed, the vehicle will accel- reduced.
  • Page 185: Cruise Control

    4-5. Using the driving support systems Cruise control Vehicle speed may exceed the set speed when driving down a steep hill. The vehicle can be driven at ● When it is necessary to disable a set speed even if the the system: P.149 accelerator pedal is not depressed.
  • Page 186 4-5. Using the driving support systems Using the cruise control Adjusting the set vehicle speed Setting the vehicle speed Adjusting the set vehicle ■ speed using the switches Press the driving assist mode To change the set vehicle select switch to select cruise speed, press the “+”...
  • Page 187: Bsm (Blind Spot Monitor)

    4-5. Using the driving support systems BSM (Blind Spot Moni- Canceling/resuming con- tor) trol : If equipped The Blind Spot Monitor is a system that uses rear side radar sensors installed on the inner side of the rear bumper on the left and right side to assist the driver in confirming safety when Press the cancel switch or...
  • Page 188 If the message does not disappear, turn signal lever is operated toward have the vehicle inspected by the detected side, the outside rear your Toyota dealer. view mirror indicator flashes. Driving assist information indicator Illuminates when the Blind Spot Monitor is turned off.
  • Page 189 ON, the Blind Spot Monitor is ● If a sensor or the rear bumper enabled. needs to be removed/installed or replaced, contact your Toyota dealer. Blind Spot Monitor operation Objects that can be detected while driving ■ The Blind Spot Monitor uses rear side radar sensors to detect the fol-...
  • Page 190 4-5. Using the driving support systems Vehicles that are traveling in areas that are not visible using the outside rear view mirrors (the blind spots) Vehicles that are approaching rapidly from behind in areas that are not visible using the outside rear view mirrors (the blind spots) Detection range while driving ■...
  • Page 191 4-5. Using the driving support systems ■ Conditions under which the ■ The Blind Spot Monitor is oper- system may not function cor- ational when rectly The Blind Spot Monitor is opera- ● The Blind Spot Monitor may not tional when all of the following con- detect vehicles correctly in the fol- ditions are met: lowing situations:...
  • Page 192: Rcta (Rear Cross Traffic Alert) Function

    4-5. Using the driving support systems Monitor is turned on RCTA (Rear Cross Traf- • When towing with the vehicle fic Alert) function ● Instances of the Blind Spot Moni- tor unnecessarily detecting a vehi- cle and/or object may increase in : If equipped the following situations: The RCTA function uses the...
  • Page 193 4-5. Using the driving support systems screen may be different from this System components illustration. Driving assist information indicator Illuminates when the RCTA is turned off. At this time, “Rear Cross Traffic Alert OFF” will be displayed on the multi-information display. Turning the RCTA func- tion on/off Meter control switches...
  • Page 194 4-5. Using the driving support systems rear view mirror indicators and sounding a buzzer. Approaching vehicles Detection areas of approaching vehicles RCTA icon display ■ When a vehicle approaching from the right or left at the rear of the vehicle is detected, the following will be displayed on the audio system screen.
  • Page 195 4-5. Using the driving support systems Example: Approaching Approximate vehicle speed alert distance 34 mph (56 131 ft. (40 m) km/h) (fast) 5 mph (8 km/h) 18 ft. (5.5 m) ● Guardrails, walls, signs, parked (slow) vehicles and similar stationary objects ■...
  • Page 196 4-5. Using the driving support systems obstruct a sensor is installed, such ● If the front of the vehicle is raised as a towing eyelet, bumper pro- or lowered due to the carried load tector (an additional trim strip, ● When turning while backing up etc.), bicycle carrier, or snow plow ●...
  • Page 197 4-5. Using the driving support systems ● When a sensor or the area around a sensor is extremely hot or cold ● If the suspension has been modi- fied or tires of a size other than specified are installed ● If the front of the vehicle is raised or lowered due to the carried load ●...
  • Page 198: Safe Exit Assist

    4-5. Using the driving support systems Safe Exit Assist System components : If equipped The safe exit assist is a sys- tem that uses rear side radar sensors installed on the inner side of the rear bumper to help occupants judge if an approaching vehicle or bicycle may col- lide with a door when exit-...
  • Page 199 In the following WARNING situations, have your vehicle ■ To ensure the system can inspected by your Toyota dealer. operate properly • A sensor or its surrounding area Safe exit assist sensors are is subject to a strong impact.
  • Page 200 4-5. Using the driving support systems time, “Safe Exit Assist OFF” will engine switch is turned to ON, be displayed on the multi-infor- the safe exit assist is enabled. mation display. Each time the Safe exit assist operation Objects that can be detected by the safe exit assist ■...
  • Page 201 4-5. Using the driving support systems since the engine was off, or less ■ Conditions under which the than 3 minutes have elapsed system may not function cor- since a door was opened and rectly someone has entered the vehicle ●...
  • Page 202 4-5. Using the driving support systems vehicle at an angle Driving mode select • When the vehicle is stopped at an switch angle to the road • When a vehicle or bicycle approaches from behind a parked The driving modes can be vehicle at an angle •...
  • Page 203: Awd Mode Select Switch

    4-5. Using the driving support systems Eco drive mode AWD mode select Helps the driver accelerate in an switch eco-friendly manner and improve fuel economy through moderate The following modes can be throttle characteristics and by con- selected to suit the driving trolling the operation of the air con- and road conditions by con- ditioning system (heating/cooling).
  • Page 204: Driving Assist Systems

    4-5. Using the driving support systems By controlling the driving force to be Driving assist systems distributed to the four wheels opti- mally according to the shift of To keep driving safety and weighting when accelerating, this performance, the following mode maximizes the performance of the Active Torque Split AWD sys- systems operate automati-...
  • Page 205 4-5. Using the driving support systems Enhanced VSC (Enhanced Secondary Collision Brake ■ ■ Vehicle Stability Control) When the SRS airbag sensor Provides cooperative control of detects a collision and the sys- the ABS, TRAC, VSC and EPS. tem operates, the brakes and Helps to maintain directional brake lights are automatically stability when swerving on slip-...
  • Page 206 4-5. Using the driving support systems ■ Turning off both TRAC and VSC systems To turn the TRAC and VSC systems off, press and hold for more than 3 seconds while the vehicle is stopped. The “TRAC OFF” indicator light and ●...
  • Page 207 4-5. Using the driving support systems the information continues to show, may occur when the above sys- contact your Toyota dealer. tems are operating. None of these indicates that a malfunction has ■ Operating conditions of occurred. hill-start assist control •...
  • Page 208 4-5. Using the driving support systems no problem. If the message WARNING remains, have the vehicle inspected by your Toyota dealer ■ The ABS does not operate immediately. effectively when ● “AWD System Overheated 2WD ● The limits of tire gripping perfor- Mode Engaged.”...
  • Page 209 ■ When the TRAC/VSC is acti- Contact your Toyota dealer for fur- vated ther information when replacing tires or wheels. The slip indicator light flashes. Always drive carefully. Reckless ■...
  • Page 210: 4-6. Driving Tips

    ■ Driving with snow tires Request repairs or replacement of Observe the following precautions snow tires from Toyota dealers or to reduce the risk of accidents. legitimate tire retailers. Failure to do so may result in a This is because the removal and...
  • Page 211 4-6. Driving tips ting the parking brake. The park- Before driving the vehicle ing brake may freeze up, preventing it from being Perform the following according to the driving conditions: released. If the vehicle is parked without setting the parking ...
  • Page 212 4-6. Driving tips Regulations on the use of tire chains Regulations regarding the use of tire chains vary depending on location and type of road. Always check local regulations before installing chains. ■ Tire chain installation Observe the following precautions when installing and removing chains: ●...
  • Page 213: Interior Features

    Interior features 5-1. Using the air conditioning system and defogger Automatic air conditioning system....... Heated steering wheel/seat heaters ...... 5-2. Using the interior lights Interior lights list ..5-3. Using the storage features List of storage features ........Luggage compartment fea- tures ......
  • Page 214: Tem

    5-1. Using the air conditioning system and defogger Automatic air conditioning system 5-1.Using the air conditioning system and defogger Air outlets are automatically selected and fan speed is auto- matically adjusted according to the set temperature setting. Air conditioning controls Vehicles without DUAL mode air conditioning system ...
  • Page 215 5-1. Using the air conditioning system and defogger Vehicles with DUAL mode air conditioning system  Driver’s side temperature control switch Passenger’s side temperature control switch “SYNC” switch “A/C” switch Outside air mode switch Recirculated air mode switch Airflow mode control switch Fan speed increases switch Fan speed decreases switch Eco air conditioning mode switch...
  • Page 216 5-1. Using the air conditioning system and defogger operate the passenger’s side tem- perature control switch to enter individual mode. Individual modes (indicator off): The temperature for the driver’s and front passenger’s side can be adjusted separately. Setting the fan speed ■...
  • Page 217 5-1. Using the air conditioning system and defogger windshield and front side win- tized such as reducing fan dows. speed, etc. Press the windshield defogger Press the eco air conditioning switch. mode switch. Set the outside/recirculated air When the eco air conditioning mode switch to outside air mode if mode is on, the indicator illumi- the recirculated air mode is used.
  • Page 218 5-1. Using the air conditioning system and defogger from entering the vehicle interior ● To reduce potential odors from and helping to cool the vehicle occurring: when the outside air temperature • It is recommended that the air is high. conditioning system be set to out- side air mode prior to turning the ●...
  • Page 219 Have repair/replacement per- formed by your Toyota dealer. When a part of the air conditioning Flammable refrigerant system, such as the evaporator, is to be replaced, it must be replaced with a new one.
  • Page 220 5-1. Using the air conditioning system and defogger Windshield wiper de-icer (if equipped) :If equipped Adjusting the position of ■ and opening and closing Prevent ice from building up on the air outlets the windshield and wiper Front center blades. ...
  • Page 221: Heated Steering Wheel/Seat Heaters

    5-1. Using the air conditioning system and defogger Front left-hand side Heated steering  wheel /seat heaters : If equipped  Heated steering wheel Warms up the grip of the steering wheel  Seat heaters Warm up the seat upholstery Direct air flow to the left or right, up or down WARNING...
  • Page 222 5-1. Using the air conditioning system and defogger Operation instructions WARNING ■ To prevent overheating and Heated steering wheel ■ minor burn injuries Turns heated steering wheel Observe the following precautions when using the seat heaters. on/off ● Do not cover the seat with a When the heated steering wheel is blanket or cushion when using on, the indicator illuminates on the...
  • Page 223: Using The Interior Lights

    5-2. Using the interior lights Interior lights list 5-2.Using the interior lights Location of the interior lights Rear interior light (P.223) Front interior/personal lights (P.223) Operating the interior Turns the lights on/off lights Rear ■ Front ■ Turns the lights on/off Turns the door position on/off When the door position is on for When a door is opened while the...
  • Page 224 5-2. Using the interior lights interior light will turn on when a minutes. The interior lights can be turned off door is open and turn off when manually. However, in order to help all of them are closed. prevent further collisions, it is rec- ommended that they be left on until When the rear interior light is on safety can be ensured.
  • Page 225: Using The Storage Features

    5-3. Using the storage features List of storage features 5-3.Using the storage features Location of the storage features Bottle holders (P.226) Open trays (P.227) Glove box (P.226) Cup holders (P.226) ● Lighters or spray cans may WARNING explode. If they come into con- ■...
  • Page 226 5-3. Using the storage features Glove box WARNING ■ Items unsuitable for the cup Pull up the lever to open the holder glove box. Do not place anything other than cups or beverage cans in the cup WARNING holders. Inappropriate items must not be ■...
  • Page 227 5-3. Using the storage features Rear Rear   WARNING ■ Bottle holders ■ Caution while driving ● When storing a bottle, close the cap. Observe the following precautions ● The bottle may not be stored when putting items in the open depending on its size or shape.
  • Page 228: Luggage Compartment Features

    5-3. Using the storage features Luggage compart- Auxiliary box ment features Lift the deck mat. Cargo hooks The cargo hooks are provided for securing loose items. WARNING ■ When cargo hooks are not in To avoid injury, always return the hooks to their stowed positions when not in use.
  • Page 229 5-3. Using the storage features Removing the luggage cover Unhook the cords. Remove the cover from the anchors.
  • Page 230: 5-4. Other Interior Features

    5-4. Other interior features ● If the connected external device is Other interior features 5-4.Other interior features turned off (depending on device) ● If the temperature inside the vehi- USB charging port cle is high, such as after the vehi- cle has been parked in the sun The USB charging port are used ■...
  • Page 231 5-4. Other interior features for 12 V accessories that run on Wireless charger (if less than 10 A. equipped) Open the console box lid and A portable device, such as a open the lid. smartphone or mobile battery, can be charged by just placing it on the charging area, provided the device is compatible with the Qi wireless charging standard...
  • Page 232 5-4. Other interior features If charging does not begin, move Power supply switch the portable device as close to the Operation indicator light center of the charging area as pos- sible. If charging is not performed, Charging tray the operation indicator light will slowly illuminate in green and Charge area orange alternatively and a sound of...
  • Page 233 If an error is detected, the operation indicator light will blink (orange). Take the appropriate measures according to the table below. Operation indicator light Suspected cause Measure Blinks (orange) at a one Vehicle to charger com- Contact your Toyota second interval continu- munication failure. dealer. ously A foreign object exists...
  • Page 234 5-4. Other interior features ■ If interference is heard in AM ■ Caution regarding interfer- radio broadcasts while ence with electronic devices charging People with implantable cardiac Turn off the wireless charger and pacemakers, cardiac resynchroni- check if the noise is reduced. If zation therapy pacemakers or noise is reduced, press and hold the implantable cardioverter defibrilla-...
  • Page 235 ● When a portable device is fully less charger may be malfunction- charged ing. Contact your Toyota dealer. ● When there is a foreign object ■ To prevent failure or damage between the charging area and...
  • Page 236 5-4. Other interior features To set the visor in the forward position, flip it down. To set the visor in the side position, flip down, unhook, and swing it to the side. To use the side extender, place the visor in the side position, then slide it back- ward.
  • Page 237 5-4. Other interior features NOTICE ■ To prevent damage to the assist grip Do not hang any heavy object or put a heavy load on the assist grip. Coat hooks The coat hooks are provided with the rear assist grips. WARNING ■...
  • Page 238 5-4. Other interior features...
  • Page 239: Maintenance And Care Cleaning And Protecting The Vehicle Exterior

    Maintenance and care Engine compartment ... 6-1. Maintenance and care Battery......Cleaning and protecting the vehicle exterior ..Tires ......Cleaning and protecting the Replacing the tire ..vehicle interior ... Tire inflation pressure.. 6-2. Matte paint care guide Wheels ......Basic knowledge about Air conditioning filter ..
  • Page 240: 6-1. Maintenance And Care

    6-1. Maintenance and care machine operation. This may pre- Cleaning and protect- 6-1.Maintenance and care vent the vehicle from being ing the vehicle exte- cleaned properly or result in dam- rior age to the rear spoiler. ■ High pressure car washes As water may enter the cabin, do Perform cleaning in a man- not bring the nozzle tip near the...
  • Page 241: Maintenance And Care

    6-1. Maintenance and care after use. ● Toyota Safety Sense 3.0 ● Rust may form if the vehicle is ● BSM (if equipped) parked with wet brake pads or disc rotors, causing them to stick. ● RCTA (if equipped) Before parking the vehicle after it is washed, drive slowly and apply ●...
  • Page 242 6-1. Maintenance and care • Brake parts NOTICE ■ Cleaning the exterior lights ● Keep the cleaning nozzle at least 11.9 in. (30 cm) away from Wash carefully. Do not use ● the vehicles body. Otherwise organic substances or scrub resin section, such as moldings with a hard brush.
  • Page 243: Cleaning And Protecting The Vehicle Interior

    6-1. Maintenance and care Cleaning and protect- NOTICE ing the vehicle interior ● When washing the vehicle, do not allow a large amount of water to enter the hood vents at Perform cleaning in a man- once, such as when using a ner appropriate to each bucket, etc.
  • Page 244 6-1. Maintenance and care ● Do not use polish wax or polish WARNING cleaner. The instrument panel’s ■ Water in the vehicle or other interior part’s painted surface may be damaged. Do not splash or spill liquid in ● the vehicle. ■...
  • Page 245 Be careful not to scratch or damage the heater wires or antenna. ■ Caring for leather areas Toyota recommends cleaning the interior of the vehicle at least twice a Cleaning the areas with year to maintain the quality of the satin-finish metal accents vehicle’s interior.
  • Page 246: Forced Plastic] Roof)

    6-2. Matte paint care guide Basic knowledge 6-2.Matte paint care guide about matte clear coat (vehicles with a CFRP [Carbon Fiber Rein- forced Plastic] roof) The body of a vehicle is painted with layers of sev- Light eral different coatings to enhance its durability and Clear appearance.
  • Page 247 6-2. Matte paint care guide reflects off the surface. A surface painted with normal clear coat is flat and smooth. As the amount of light that reflects off the surface is large, the vehi- cle body will appear glossy. A surface painted with a matte clear coat is slightly uneven due Illustrations in this manual are to the added matting agent.
  • Page 248 Ask your Toyota dealer for details. ■ Materials that may become diffi- cult to remove...
  • Page 249 6-2. Matte paint care guide In order to maintain the matte surface, making it more flat. As a result, it will become more glossy, finish when repairing damage, it possibly permanently losing its will be necessary to repaint the matte properties. entire part.
  • Page 250: Washing Your Vehicle (Vehi- Cles With A Cfrp [Carbon Fiber Reinforced Plastic] Roof)

    6-2. Matte paint care guide Washing your vehicle (vehicles with a CFRP [Carbon Fiber Rein- forced Plastic] roof) In order to avoid damage to the vehicle's paint, washing the vehicle by hand with only water is recommended. ■ Using a vehicle cover ●...
  • Page 251 6-2. Matte paint care guide the water pressure. that was used to wash the vehicle (step 2). ■ If dirt cannot be washed off with water alone ● Water stains If liquid, such as rain water or tap water, evaporates on a painted sur- face, dirt or minerals in the liquid may be left behind.
  • Page 252 6-2. Matte paint care guide Citric acid powder: 0.01 to 0.02 lb. care to not rub the vehicle body. (5 to 10 g) (1 to 2 teaspoons) After that, apply plenty of water to Distilled water: 0.2 qt. (0.2 L, 0.2 the area wash off the dirt and deter- Imp.
  • Page 253: Frequently Asked Questions (Vehicles With A Cfrp [Carbon Fiber Reinforced Plastic] Roof)

    6-2. Matte paint care guide Frequently Asked Questions (vehicles with a CFRP [Carbon Fiber Reinforced Plastic] roof) The following are frequently asked questions about the matte clear coat and their answers: Washing the vehicle General washing tips (P.250) ■ Question Answer Can the vehicle be washed?
  • Page 254 6-2. Matte paint care guide Item Answer Remove immediately. They may scratch the matte clear coat and if they Leaves, flowers, are allowed to remain on the vehicle, dirt may branches, etc. settle into the matte clear coat, making it more flat.
  • Page 255 Use a soft chamois cloth. What should I use to dry the vehicle? Toyota does not recommend the use of water stain removers, as they may damage the matte Can I use a water stain clear coat.
  • Page 256 Can damage to the paint ing paint damage, it is necessary to repaint the be repaired? entire part. Consult your Toyota dealer for details. Can I use rubbing or pol- No. Using a rubbing or polishing compound or ishing compound (ex.
  • Page 257 6-2. Matte paint care guide Attaching accessories and other objects to the vehicle ■ Question Answer No. They may damage matte clear coat when Can a sticker or vinyl they are installed and may cause the matte clear wrap be attached to the coat to lose its matte texture when they are vehicle body? removed.
  • Page 258: 6-3. Maintenance

    ■ Repair and replacement exposure and wash any It is recommended that genuine affected area immediately. Toyota parts be used for repairs to ● Battery posts, terminals and ensure performance of each sys- related accessories contain lead tem. If non-Toyota parts are used in...
  • Page 259: General Maintenance

    (P.272) warranty coverage. Is the engine cool- Engine coolant ant at the correct The use of Toyota repair manuals is level? (P.271) recommended. For details about warranty cover- Is the engine oil at age, refer to the separate “Owner’s...
  • Page 260 6-3. Maintenance Items Check points Items Check points The radiator, con- • Does the clutch Radiator/con- denser and inter- pedal move denser and cooler should be smoothly? intercooler free from foreign • Does the clutch objects. (P.272) pedal have appropriate Is there sufficient clearance from Washer fluid...
  • Page 261 6-3. Maintenance Vehicle exterior Items Check points • Does the park- Items Check points ing brake oper- ate normally? • Do the doors • When parked on Doors operate Parking brake a slope and the smoothly? parking brake is • Does the engine on, is the vehicle Engine hood hood lock system...
  • Page 262: Emission Inspection And Maintenance (I/M) Programs

    If the malfunction indica- If your vehicle does not tor lamp comes on pass the I/M test The OBD system determines Contact your Toyota dealer to that a problem exists some- prepare the vehicle for re-test- where in the emission control ing.
  • Page 263: Do-It-Yourself Maintenance

    • Conventional as given in these sections. (P.274) wrench (for terminal clamp bolts) • “TOYOTA GENU- INE BRAKE FLUID DOT4, CLASS6” FMVSS No.116 DOT4 or SAE J1704LV : If a fluid type with “TOYOTA GENU- INE BRAKE FLUID DOT4, CLASS6”,...
  • Page 264 6-4. Do-it-yourself maintenance Items Parts and tools Items Parts and tools • “Toyota Super Long Radiator, Life Coolant” or a condenser similar high quality and inter-  ethylene gly- cooler col-based non-sili- (P.272) cate, non-amine, Tire infla- non-nitrite and • Tire pressure gauge...
  • Page 265: Hood

    6-4. Do-it-yourself maintenance Hood WARNING ● Be extremely cautious when working on the battery. It con- Opening the hood tains poisonous and corrosive sulfuric acid. Pull the hood lock release ■ When working near the elec- lever. tric cooling fan or radiator The hood will pop up slightly.
  • Page 266 6-4. Do-it-yourself maintenance Hold the hood open by insert- NOTICE ing the support rod into the ■ When closing the hood slot. Be sure to return the support rod to its clip before closing the hood. Closing the hood with the support rod not clipped could cause the hood to bend.
  • Page 267: Positioning A Floor Jack

    6-4. Do-it-yourself maintenance Rear ■ Positioning a floor jack When using a floor jack, fol- low the instructions in the manual provided with the jack and perform the opera- tion safely. When raising your vehicle with a floor jack, position the jack correctly.
  • Page 268: Engine Compartment

    6-4. Do-it-yourself maintenance Engine compartment Components Washer fluid tank (P.273) Engine coolant reservoir (P.268) Engine oil filler cap (P.270) Engine oil level dipstick (P.268) Brake fluid reservoir (P.272) Fuse box (P.301) Radiator (P.272) Condenser (P.272) Electric cooling fan Intercooler Park the vehicle on level Checking the engine oil ground.
  • Page 269 6-4. Do-it-yourself maintenance Holding a rag under the end, ■ Engine oil consumption pull the dipstick out. A certain amount of engine oil will be consumed while driving. In the following situations, oil consump- tion may increase, and engine oil may need to be refilled in between oil maintenance intervals.
  • Page 270 Do not dispose of used oil and filters in household trash, in sewers or onto the ground. Call your Toyota dealer, service station or auto parts store for information concerning recy- cling or disposal.
  • Page 271 6-4. Do-it-yourself maintenance U.S.A.: NOTICE “Toyota Super Long Life Coolant” is ■ If oil is spilled on the engine a mixture of 50% coolant and 50% cover deionized water. (Minimum tem- perature: -31°F [-35°C]) To prevent the engine cover from...
  • Page 272 If either of the above parts is extremely dirty or you are not sure of their condition, have your vehicle inspected by your Toyota dealer. WARNING Disconnect the claws and When the engine is hot ■...
  • Page 273 Except for Canada  No.116 DOT4 or SAE J1704LV If the washer fluid level is at : If a fluid type with “TOYOTA “LOW”, add washer fluid. GENUINE BRAKE FLUID DOT4, CLASS6”, FMVSS No.116 DOT4 or SAE J1704LV is not available,...
  • Page 274: Battery

    6-4. Do-it-yourself maintenance Battery Location The battery is located in the center of luggage compartment. Current fluid level WARNING ■ When adding washer fluid Do not add washer fluid when the engine is hot or running as washer fluid contains alcohol and may catch fire if spilled on the engine, etc.
  • Page 275 Always charge the battery in an a fire or explosion. open area. Do not charge the bat- For replacement of the battery, tery in a garage or closed room contact your Toyota dealer. where there is insufficient ventila- tion.
  • Page 276 6-4. Do-it-yourself maintenance Red: Charging is necessary. NOTICE Have the vehicle inspected ■ When recharging the battery by your Toyota dealer. Never recharge the battery while the engine is running. Also, be Clear: Replacement is nec- sure all accessories are turned essary.
  • Page 277: Tires

    Also check the tires for uneven damage wear, such as excessive wear If you are not sure, consult with your on one side of the tread. Toyota dealer. ■ Tire life Any tire over 6 years old must be checked by a qualified technician even if it has seldom or never been used or damage is not obvious.
  • Page 278 Also, ● Do not use tire sizes other than all season tires fall short in accelera- those recommended by Toyota. tion and handling performance com- ● Do not mix differently con- pared with summer tires in highway structed tires (radial, bias-belted driving.
  • Page 279 To equalize tire wear and extend ● Avoid potholes, uneven pave- tire life, Toyota recommends that ment, curbs and other road haz- tire rotation is carried out at the ards. Failure to do so may lead same interval as tire inspection.
  • Page 280 In the following cases, the tire mation display and then pressure warning system may not operate properly. press • If non-genuine Toyota wheels are used. Press to select • A tire has been replaced with a tire that is not an OE (Original “Vehicle Settings”...
  • Page 281 The warning of the tire pressure warning valves and transmit- warning system will change in ters, contact your Toyota dealer accordance with driving conditions. as the tire pressure warning For this reason, the system may...
  • Page 282 Press to select operate properly. If a liquid seal- “TPWS setting” and then ant is used, contact your Toyota dealer or other qualified service press shop as soon as possible. Make sure to replace the tire pressure...
  • Page 283 6-4. Do-it-yourself maintenance Even if it is not possible to drive minutes and then drive the vehicle continuously at approximately 25 again. mph (40 km/h) or more, registration ● If the vehicle is reversed during can be completed by driving for a wheel position registration, all long time.
  • Page 284 “TPWS setting” and then ● If tire inflation pressure setting press procedure cannot be completed after performing the above proce- dure, contact your Toyota dealer. Press to select “Tire Pressure Setting” and Setting using the current ■ tire inflation pressure...
  • Page 285 6-4. Do-it-yourself maintenance setting using the current tire infla- Select of the multi-infor- tion pressure, the warning timing mation display and then of the tire pressure warning sys- tem will vary according to the con- press ditions under which tire pressure setting was performed.
  • Page 286 6-4. Do-it-yourself maintenance procedure cannot be completed Select of the multi-infor- after performing the above proce- mation display and then dure, contact your Toyota dealer. press Registering ID codes Press to select The tire pressure warning valve “Vehicle Settings” and then...
  • Page 287 6-4. Do-it-yourself maintenance 10If the tire inflation pressure of tion display. the wheel set installed differs from that of the previous set, it will be necessary to per- form the tire inflation pres- sure setting procedure of the tire pressure warning system. If the specified tire inflation pres- sure is the same, it will not be nec- essary to perform the tire inflation...
  • Page 288 If the ID codes cannot be regis- tered even when performing the before changing between above procedure, contact your wheel sets. Toyota dealer. Install the desired wheel set. Canceling ID code registration ■ To cancel ID code registration after Select of the multi-infor- it has been started, select “Register...
  • Page 289 6-4. Do-it-yourself maintenance 10Register the position of each indicating that change is occurring will be displayed, and the wheel set wheel. change will begin. Wheel set change will begin and the tire pressure warning light will blink for 1 minute and then illumi- nate.
  • Page 290: Replacing The Tire

    If necessary tire replace- tire chains. ment seems difficult to per- form, contact your Toyota ● Only use the tire jack that comes with this vehicle for dealer. replacing a flat tire. Do not use it...
  • Page 291 6-4. Do-it-yourself maintenance Wheel chock WARNING Tire positions ● When lowering the vehicle, make sure that there is no-one Behind the rear Front left-hand near the vehicle. If there are right-hand side people nearby, warn them side tire vocally before lowering. Front right-hand Behind the rear side...
  • Page 292 6-4. Do-it-yourself maintenance is in contact with the center of When resting the tire on the ground, place the tire so that the the jack point. wheel design faces up to avoid scratching the wheel surface. WARNING ■ Replacing a tire Do not touch the disc wheels or Assemble the jack handle the area around the brakes imme-...
  • Page 293 6-4. Do-it-yourself maintenance Install the tire and loosely 76 ft•lbf (103 N•m, 10.5 tighten each wheel nut by kgf•m) hand by approximately the same amount. Turn the wheel nuts until the wash- ers come into contact with the disc wheel. WARNING ■...
  • Page 294: Tire Inflation Pressure

    Make wheel, have the vehicle sure to check the tire infla- inspected by your Toyota dealer. tion pressure once every two weeks or before going on a long distance drive.
  • Page 295 Reduced tire life due to wear ● Reduced safety ● Damage to the drive train If a tire needs frequent inflating, have it checked by your Toyota Tire valve dealer. Tire pressure gauge ■ Instructions for checking tire inflation pressure Remove the tire valve cap.
  • Page 296: Wheels

    ● Wheel deformation and/or tire Replacement wheels are avail- damage able at your Toyota dealer. ● Greater possibility of tire dam- : Conventionally referred to as off- age while driving (due to road hazards, expansion joints, set.
  • Page 297 Never use an inner tube in a leaking wheel which is designed tions for a tubeless tire. Doing so may result in an acci-  Use only Toyota wheel nuts dent, causing death or serious injury. and wheel nut wrenches designed for use with your ■...
  • Page 298: Air Conditioning Filter

    6-4. Do-it-yourself maintenance Air conditioning filter claws ( ), and remove the filter cover. The air conditioning filter must be changed regularly to maintain air conditioning efficiency. Removing the air condi- tioning filter Turn the engine switch off. Remove the filter case. Open the glove box.
  • Page 299: Electronic Key Battery

     Flathead screwdriver  Lithium battery CR2450 ■ Use a CR2450 lithium battery ● Batteries can be purchased at your Toyota dealer, local electrical appliance shops or camera stores. ● Replace only with the same or equivalent type recommended by the manufacturer.
  • Page 300 Insert a new battery with the “+” ter- ● If the cover cannot be firmly closed, stop using the electronic key and stow the key in the place where children cannot reach, and then contact your Toyota dealer.
  • Page 301: Checking And Replacing Fuses

    6-4. Do-it-yourself maintenance Checking and replac- WARNING ing fuses ● If you accidentally swallow a battery or put a battery into a part of your body, get emer- If any of the electrical com- gency medical attention imme- ponents do not operate, a diately.
  • Page 302 6-4. Do-it-yourself maintenance Remove the fuse with the Normal fuse pullout tool. Blown fuse Only type A fuse can be Type C  removed using the pullout tool. Normal fuse Check if the fuse is blown. Blown fuse Replace the blown fuse with a new Type D ...
  • Page 303 Have the cause of electrical over- load determined and repaired by ● If the lights do not turn on even your Toyota dealer as soon as after the fuse has been replaced, a bulb may need replacement. possible. ●...
  • Page 304: Light Bulbs

    LEDs. If any of the LEDs burn out, contact your Toyota dealer. take your vehicle to your Toyota dealer to have the light replaced. ■ Condensation build-up on the...
  • Page 305 6-4. Do-it-yourself maintenance a tape. WARNING ■ Replacing light bulbs Turn off the lights. Do not ● attempt to replace the bulb immediately after turning off the lights. The bulbs become very hot and may cause burns. ● Do not touch the glass portion of the light bulb with bare hands.
  • Page 306 6-4. Do-it-yourself maintenance...
  • Page 307: When Trouble Arises

    When trouble arises 7-1. Essential information Emergency flashers ..If your vehicle has to be stopped in an emergency ........If the vehicle is submerged or water on the road is ris- ing ......7-2. Steps to take in an emer- gency If your vehicle needs to be towed......
  • Page 308: Essential Information Emergency Flashers

    7-1. Essential information Emergency flashers If your vehicle has to 7-1.Essential information be stopped in an emer- gency The emergency flashers are used to warn other drivers when the vehicle has to be Only in an emergency, such stopped on the road due to as if it becomes impossible a breakdown, etc.
  • Page 309: If The Vehicle Is Submerged Or Water On The Road Is Rising

    7-1. Essential information more, or press it briefly 3 If the vehicle is sub- times or more in succession. merged or water on the road is rising This vehicle is not designed to be able to drive on roads that are deeply flooded with water.
  • Page 310 Laminated glass cannot be shat- tered with an emergency hammer Tempered glass is used in the win- dows on this vehicle. : Contact your Toyota dealer or aftermarket accessory manufac- turer for further information about an emergency hammer. WARNING Caution while driving ■...
  • Page 311: 7-2. Steps To Take In An Emergency

    Situations when it is nec- essary to contact dealers before towing The following may indicate a problem with your transmission. Contact your Toyota dealer or commercial towing service before towing. Use a towing dolly under the  The engine is running but the front wheels.
  • Page 312 7-2. Steps to take in an emergency ■ Towing with a sling-type truck WARNING Do not tow with a sling-type truck ■ When towing the vehicle to prevent body damage. Be sure to transport the vehicle with all four wheels raised off the ground.
  • Page 313 ■ Wheel nut wrench Wheel nut wrench can be pur- chased at your Toyota dealer. WARNING Observe the following precau- tions. Failure to do so may result in death or serious injury.
  • Page 314: If You Think Something Is Wrong

    The towing eyelets, cables or chains may become adjustment or repair. Con- damaged, broken debris may hit tact your Toyota dealer as people, and cause serious dam- soon as possible. age. ● Do not turn the engine switch off.
  • Page 315 7-2. Steps to take in an emergency side when braking Fuel pump shut off system  Vehicle pulls heavily to one side when driving on a level road To minimize the risk of fuel leakage when the engine  Loss of brake effectiveness, stalls or when an airbag spongy feeling, pedal almost inflates upon collision, the...
  • Page 316: If A Warning Light Turns On Or A Warning Buzzer Sounds

     The brake fluid level is low; or (U.S.A.)  The brake system is malfunctioning  Immediately stop the vehicle in a safe place and con- tact your Toyota dealer. Continuing to drive the vehi- cle may be dangerous. (Canada) High coolant temperature warning light (warning buzzer) ■...
  • Page 317 ■ Warning light Details/Actions Indicates a malfunction in:  The SRS airbag system; or  The seat belt pretensioner system  Have the vehicle inspected by your Toyota dealer immediately. ABS warning light ■ Warning light Details/Actions Indicates a malfunction in: (U.S.A.)
  • Page 318 ■ buzzer) Warning light Details/Actions Indicates a malfunction in the EPS (Electric Power Steer- (Red) ing) system  Have the vehicle inspected by your Toyota dealer immediately. (Yellow) Low fuel level warning light ■ Warning light Details/Actions Indicates that remaining fuel is approximately 2 gal. (7.5 L, 1.6 Imp.
  • Page 319 7-2. Steps to take in an emergency Driver’s and front passenger’s seat belt reminder light (warn- ■ ing buzzer) Warning light Details/Actions Warns the driver and/or front passenger to fasten their seat belts  Fasten the seat belt. If the front passenger’s seat is occupied, the front passenger’s seat belt also needs to be fastened to make the warning light (warning buzzer) turn off.
  • Page 320 When the light comes on after blinking for approximately 1 minute (a buzzer does not sounds): Malfunction in the tire pressure warning system  Have the system checked by your Toyota dealer. When the light comes on (a buzzer sounds): Low tire inflation pressure from natural causes ...
  • Page 321 (P.325) : If equipped Slip indicator ■ Warning light Details/Actions Indicates a malfunction in:  The VSC system;  The TRAC system; or  The hill-start assist control system  Have the vehicle inspected by your Toyota dealer immediately.
  • Page 322 7-2. Steps to take in an emergency iMT indicator ■ Warning light Details/Actions Indicates a malfunction in the iMT  Have the vehicle inspected by your Toyota dealer immediately. (Orange) If the light does not go off even after ■ Warning buzzer several trips, contact your Toyota dealer as soon as possible.
  • Page 323 7-2. Steps to take in an emergency ■ The tire pressure warning light ● Stop your vehicle in a safe place may come on due to natural as soon as possible. Adjust the causes tire inflation pressure immedi- The tire pressure warning light may ately.
  • Page 324 7-2. Steps to take in an emergency Your vehicle has also been WARNING equipped with a TPMS (tire pres- As an added safety feature, your sure warning system) malfunc- vehicle has been equipped with a tion indicator to indicate when the tire pressure monitoring system system is not operating properly.
  • Page 325: If A Warning Message Is Displayed

    ■ Warning messages If the message is not cleared, have the vehicle inspected by your Toyota The warning messages explained dealer. below may differ from the actual messages according to operation ■...
  • Page 326 ● LTA (Lane Tracing Assist) • Check the voltage of the battery ● AHB (Automatic High Beam) • Check the sensors that the Toyota Safety Sense 3.0 uses for foreign ● Dynamic radar cruise control matter covering them. Remove ●...
  • Page 327 7-2. Steps to take in an emergency vehicle was parked, depending on ● Dynamic radar cruise control its type, the sunlight reflected from Follow the following correction the surface of the sunshade may methods. cause the temperature of the front camera to become excessively The temperature of the radar sensor high...
  • Page 328 Maintenance” or “Owner’s Man- mation display, it may indicate a ual Supplement” for the mainte- malfunction. Have the vehicle nance interval applicable to your inspected by your Toyota dealer vehicle. immediately. • “Smart Key System malfunction ■ If “Maintenance Required Visit See owner's manual”...
  • Page 329: If You Have A Flat Tire

    • To avoid sealant leakage, tire repaired or replaced by move the vehicle until the your Toyota dealer. Repairs area of the puncture, if conducted using the emer- known, is positioned at the gency tire puncture repair top of the tire.
  • Page 330 In the following cases, the tire can- more not be repaired with the emergency ● When the wheel is damaged tire puncture repair kit. Contact your Toyota dealer. ● When two or more tires have been punctured ● When the tire is damaged due to ●...
  • Page 331 Sticker on the bottle. The sealant should Compressor be replaced before the expiry  date. Contact your Toyota dealer for replacement. ● The sealant stored in the emer- gency tire puncture repair kit can be used only once to temporarily repair a single tire.
  • Page 332 7-2. Steps to take in an emergency Take out the emergency tire WARNING puncture repair kit. ● The repair kit is exclusively only for your vehicle. Do not use repair kit on other vehicles, which could lead to an accident causing death or seri- ous injury.
  • Page 333 7-2. Steps to take in an emergency Remove the valve cap from ble. the valve of the punctured tire. Extend the hose. Remove the air release cap from the hose. You will use the air release cap again. Therefore keep it in a safe place.
  • Page 334 7-2. Steps to take in an emergency Make sure that the compres- lar as shown. (P.358) sor switch is off. 12Start the engine. (P.127) 13To inject the sealant and Connect the power plug to the power outlet socket. inflate the tire, turn the com- (P.230) pressor switch on.
  • Page 335 7-2. Steps to take in an emergency 14Inflate the tire until the speci- to be repaired. Turn the compres- sor switch off and contact your Toy- fied air pressure is reached. ota dealer. If the tire inflation pressure exceeds the specified air pressure, let out some air to adjust the tire inflation pressure.
  • Page 336 50 cannot be repaired. Contact mph (80 km/h) to the nearest your Toyota dealer. Toyota dealer that is less If the tire inflation pressure is than 62 miles (100 km) away 19 psi (130 kPa, 1.3 for tire repair or replacement.
  • Page 337 7-2. Steps to take in an emergency WARNING ■ If the tire is inflated to more than the specified air pressure ■ Do not drive the vehicle with Disconnect the hose from the a flat tire valve. Do not continue driving with a flat Install the air release cap to the tire.
  • Page 338 7-2. Steps to take in an emergency • Tire inflation pressure. If tire WARNING inflation pressure is 19 psi (130 ● Keep back from the tire while it kPa, 1.3 kgf/cm or bar) or is being repaired, as there is a below, this may indicate severe chance of it bursting while the tire damage.
  • Page 339: If The Engine Will Not Start

     There may not be sufficient operate properly. If a liquid seal- ant is used, contact your Toyota fuel in the vehicle’s tank. dealer or other qualified service Refuel the vehicle.
  • Page 340 (P.274)  There may be a malfunction in the steering lock system. Contact your Toyota dealer if the problem cannot be repaired, or if repair procedures are unknown. Emergency start function When the engine does not start,...
  • Page 341: If You Lose Your Keys

    NOTICE ■ In case of a smart key system malfunction or other key-related problems Take your vehicle with all the elec- tronic keys provided with your vehicle to your Toyota dealer. Locking and unlocking the doors Use the mechanical key...
  • Page 342 Shift the shift lever to N and the other doors. depress the clutch pedal. ■ Key linked functions Touch the Toyota emblem side of the electronic key to the engine switch. When the electronic key is detected, a buzzer sounds and the engine switch will turn to ON.
  • Page 343: If The Vehicle Battery Is Discharged

    In the event that the engine still cannot be started, contact your The following procedures Toyota dealer. may be used to start the engine if the vehicle’s bat- ■ Stopping the engine tery is discharged.
  • Page 344 7-2. Steps to take in an emergency Remove the engine cover. Connect a positive jumper cable clamp to on your vehicle and connect the clamp on the other end of the positive cable to the second vehicle. Then, connect a negative cable clamp to on the second vehicle and connect the clamp at the other end of the negative cable to Positive (+) battery terminal (your vehicle)
  • Page 345 Once the engine starts, have the ● In some cases, it may not be pos- sible to unlock the doors using the vehicle inspected at your Toyota smart key system when the bat- dealer as soon as possible. tery is discharged. Use the wire-...
  • Page 346 Battery precautions The battery contains poisonous and corrosive acidic electrolyte, Exhaust hole plug while related parts contain lead and lead compounds. Observe Exhaust hole the following precautions when Exhaust hose handling the battery: ● For details, consult your Toyota dealer.
  • Page 347 Do not allow children near the battery. ■ After recharging the battery NOTICE Have the battery inspected at your Toyota dealer as soon as ■ When handling jumper cables possible. When connecting the jumper If the battery is deteriorating, con-...
  • Page 348: If Your Vehicle Overheats

    Cooling fan increase.) If a large amount of coolant leaks,  “Engine Coolant Temp High immediately contact your Toyota Stop in a Safe Place See dealer. Owner’s Manual” is shown The coolant level is satisfac- on the multi-information dis- tory if it is between the play.
  • Page 349 If the fan is not operating: Observe the following precau- Stop the engine immediately tions: and contact your Toyota ● Avoid contaminating the coolant dealer. with foreign matter (such as If the fan is operating: sand or dust etc.).
  • Page 350 7-2. Steps to take in an emergency If the vehicle becomes WARNING stuck ■ When attempting to free a stuck vehicle If you choose to push the vehicle Carry out the following pro- back and forth to free it, make cedures if the tires spin or sure the surrounding area is clear the vehicle becomes stuck...
  • Page 351: Vehicle Specifications

    Vehicle specifications 8-1. Specifications Maintenance data (fuel, oil level, etc.)....Fuel information ..Tire information ... 8-2. Customization Customizable features ........8-3. Initialization Items to initialize ..
  • Page 352 The vehicle identification num- ber (VIN) is the legal identifier for your vehicle. This is the pri- mary identification number for your Toyota. It is used in regis- tering the ownership of your vehicle. This number is also stamped on...
  • Page 353 Drive belt type The high strength drive belt is used for the generator side drive belt. When replacing the drive belt, use Toyota genuine drive belt or equivalent high strength drivebelt. If the high strength drive belt is not used, durability of the belt may become less than expected.
  • Page 354 ■ which allows cold startability. “Toyota Genuine Motor Oil” is Oils with a lower value before used in your Toyota vehicle. Use the W allow for easier starting Toyota approved “Toyota Genu- of the engine in cold weather. ine Motor Oil” or equivalent to •...
  • Page 355 Cooling system Capacity (Reference) 5.8 qt. (5.5 L, 4.8 Imp. qt.) Use either of the following:  “Toyota Super Long Life Coolant”  Similar high-quality ethylene glycol-based non-silicate, non-amine, non-nitrite, and Coolant type non-borate coolant with long-life hybrid organic acid technology Do not use plain water alone.
  • Page 356 , FMVSS No.116 DOT4 or SAE J1704LV : If a fluid type with “TOYOTA GENUINE BRAKE FLUID DOT4, CLASS6”, FMVSS No.116 DOT4 or SAE J1704LV is not available, fluid type with TOYOTA GENUINE BRAKE FLUID DOT3, FMVSS No.116 DOT3 or SAE J1703 may be used with no detriment to brake durability.
  • Page 357 8-1. Specifications : Your Toyota vehicle is filled with “Toyota Genuine Differential Gear Oil” at the factory. Use Toyota approved “Toyota Genuine Differential Gear Oil” or an equivalent of matching quality to satisfy the above specification. Please contact your Toyota dealer.
  • Page 358 8-1. Specifications : If a fluid type with “TOYOTA GENUINE BRAKE FLUID DOT4, CLASS6”, FMVSS No.116 DOT4 or SAE J1704LV is not available, fluid type with TOYOTA GENUINE BRAKE FLUID DOT3, FMVSS No.116 DOT3 or SAE J1703 may be used with no detriment to brake durability.
  • Page 359: Fuel Information

    EPA’s lowest addi- Some gasoline contains an octane tives concentration program. enhancing additive called MMT ● Toyota strongly recommends the (Methylcyclopentadienyl Manga- use of Top Tier Detergent Gaso- nese Tricarbonyl). line. For more information on Top Toyota does not recommend the use...
  • Page 360 The malfunction indicator lamp on the instrument cluster may come on. If this happens, contact your Toyota dealer for service. ■ If your engine knocks Consult your Toyota dealer.
  • Page 361: Tire Information

    8-1. Specifications Tire information Typical tire symbols Tire size (P.362) DOT and Tire Identification Number (TIN) (P.362) Uniform tire quality grading For details, see “Uniform Tire Quality Grading” that follows. Location of treadwear indicators (P.277) Tire ply composition and materials Plies are layers of rubber-coated parallel cords.
  • Page 362 8-1. Specifications DOT symbol Typical DOT and Tire Identification Number Tire Identification Number (TIN) (TIN) Tire manufacturer’s identifi- Type A  cation mark Manufacturer’s code Manufacturing week Manufacturing year : The DOT symbol certifies that the tire conforms to applicable Fed- eral Motor Vehicle Safety Stan- dards.
  • Page 363 Toyota vehicles with informa- Tire height tion on uniform tire quality grad- Wheel diameter ing. Your Toyota dealer will help answer Tire section names any questions you may have as you read this information. DOT quality grades ■...
  • Page 364 8-1. Specifications (the highest), B, and C, repre- would wear one and a half (1 - 1/2) times as well on the government senting the tire’s resistance to course as a tire graded 100. the generation of heat and its The relative performance of tires ability to dissipate heat when depends upon the actual conditions...
  • Page 365 8-1. Specifications Tire related term Meaning Recommended inflation pres- Cold tire inflation pressure recommended sure by a manufacturer The combined weight (in excess of those standard items which may be replaced) of automatic transmission, power steering, power brakes, power windows, power Accessory weight seats, radio and heater, to the extent that these items are available as fac-...
  • Page 366 8-1. Specifications Tire related term Meaning Rim diameter (Wheel diame- Nominal diameter of the bead seat ter) Rim size designation Rim diameter and width The industry manufacturer’s designation Rim type designation for a rim by style or code Rim width Nominal distance between rim flanges The rated cargo and luggage load plus 150 Vehicle capacity weight (Total...
  • Page 367 8-1. Specifications Tire related term Meaning The parting of cords from adjacent rubber Cord separation compounds Any parting within the tread, sidewall, or Cracking innerliner of the tire extending to cord material A pneumatic tire with an inverted flange tire and rim system in which the rim is designed with rim flanges pointed radially inward and the tire is designed to fit on the underside of the rim in a manner that...
  • Page 368 8-1. Specifications Tire related term Meaning Maximum permissible inflation The maximum cold inflation pressure to pressure which a tire may be inflated The rim on which a tire is fitted for physical Measuring rim dimension requirements Any parting at any junction of tread, side- Open splice wall, or innerliner that extends to cord material...
  • Page 369 8-1. Specifications Tire related term Meaning The parting of the rubber compound from Sidewall separation the cord material in the sidewall A tire that attains a traction index equal to or greater than 110, compared to the ASTM E-1136 Standard Reference Test Tire, when using the snow traction test as described in ASTM F-1805-00, Standard Snow tire...
  • Page 370 8-1. Specifications Designated seating Occupant distribution in Vehicle normal load, capacity, Number of a normally loaded vehi- Number of occupants occupants 2 in front, 1 in second 11 through 15 seat, 1 in third seat, 1 in fourth seat 2 in front, 2 in second 16 through 20 seat, 2 in third seat, 1 in fourth seat...
  • Page 371: Customization

    Customizable features Some function settings are changed simultaneously with other func- tions being customized. Contact your Toyota dealer for further details. Settings that can be changed using the audio system screen Settings that can be changed using the meter control switches...
  • Page 372 8-2. Customization Definition of symbols: O = Available, — = Not available Gauges, meters and multi-information display (P.68, 72, 76) ■ Default setting Customized setting Function French English O — Language Spanish km (km/L) km (L/100 km) miles (MPG) — O — Units miles (MPG Impe- rial)
  • Page 373 8-2. Customization Default setting Customized setting Function Distance TRIP B Items (Second Average vehi- — O — cle speed item) Elapsed time — O — Pop-up display : For details about each function: P.83 : The default setting varies according to country. : This setting changes in accordance with My Settings.
  • Page 374 8-2. Customization Function Default setting Customized setting Time elapsed before automatic door lock 30 seconds function is activated if 60 seconds — door is not opened after 120 seconds being unlocked Open door warning — — buzzer : This setting changes in accordance with My Settings. Smart key system (P.89, 96) ■...
  • Page 375 8-2. Customization : This setting changes in accordance with My Settings. Power windows (P.111) ■ Function Default setting Customized setting Mechanical key linked — — operation Wireless remote control On (open only) — — linked operation Wireless remote control linked operation signal —...
  • Page 376 8-2. Customization PCS (Pre-Collision System) (P.155) ■ Function Customized setting On, Off — — Pre-Collision System Later, Default, Earlier — — Warning timing : The system is automatically enabled each time the engine switch is turned to ON. : This setting changes in accordance with My Settings. LDA (Lane Departure Alert system) (P.170) ■...
  • Page 377 8-2. Customization Function Default setting Other notifications None, Visual, Visual&Audible — — method Excess speed notifica- 5 mph (10 km/h), 3 mph (5 km/h), 1 — — mph (2 km/h) tion level : If equipped : This setting changes in accordance with My Settings. Driver break suggestion (P.170) ■...
  • Page 378 8-2. Customization Safe Exit Assist (P.198) ■ Function Default setting Customized setting Safe Exit Assist — — Outside rear view mir- — — rors display High Detection sensitivity Middle — — : If equipped Driving mode select switch (P.202) ■ Function Default setting Customized setting Sport...
  • Page 379 8-2. Customization Illumination (P.223) ■ Function Default setting Customized setting Time elapsed before the 15 seconds 7.5 seconds — interior lights turn off 30 seconds Operation after the engine switch is turned — — Operation when the — — doors are unlocked Operation when you approach the vehicle —...
  • Page 380: 8-3. Initialization

    8-3. Initialization Items to initialize 8-3.Initialization The following items must be initialized for normal system operation after such cases as the battery being reconnected, or maintenance being performed on the vehicle: List of items to initialize Item When to initialize Reference •...
  • Page 381 For owners 9-1. For owners Reporting safety defects for U.S. owners....Reporting safety defects for Canadian owners ..Seat belt instructions for Canadian owners (in French)...... SRS airbag instructions for Canadian owners (in French)......
  • Page 382: For Owners

    However, NHTSA can- not become involved in individual problems between you, your dealer, or Toyota Motor Sales, U.S.A., Inc. To contact NHTSA, you may call the Vehicle Safety Hotline toll-free at 1-888-327-4236 (TTY: 1-800-424-9153);...
  • Page 383: Seat Belt Instructions For Canadian Owners (In French)

    9-1. For owners sécurité. Seat belt instructions for Canadian owners (in French) Entretien et soin Traitement des ceintures de ■ The following is a French sécurité explanation of seat belt Nettoyez avec un chiffon ou une instructions extracted from éponge humidifiés avec de l'eau the seat belt section in this savonneuse tiède.
  • Page 384: Srs Airbag Instructions For Canadian Owners (In French)

    9-1. For owners SRS airbag instructions for Canadian owners (in French) The following is a French explanation of SRS airbag instruc- tions extracted from the SRS airbag section in this manual. See the SRS airbag section for more detailed SRS airbag instruc- tions in English.
  • Page 385 9-1. For owners Coussins gonflables latéraux et rideaux SRS  Coussins gonflables latéraux avant SRS Participent à la protection du torse des occupants de siège avant Coussins gonflables latéraux arrière SRS Participent à la protection du torse des occupants des sièges latéraux arrière Coussins gonflables rideaux SRS •...
  • Page 386 9-1. For owners Coussin gonflable conducteur Contact de boucle de ceinture de sécurité conducteur Capteur de position du siège conducteur Coussin gonflable de genoux du conducteur Témoin d'avertissement SRS Capteurs d'impact avant Ensemble de capteurs de coussins gonflables Votre véhicule est équipé de COUSSINS GONFLABLES INTELLI- GENTS conçus selon les normes de sécurité...
  • Page 387 9-1. For owners • Si votre volant est réglable, AVERTISSEMENT inclinez-le vers le bas. Cela a ● Le coussin gonflable conduc- pour effet d'orienter le coussin teur SRS se déploie avec une gonflable en direction de votre force considérable, pouvant poitrine plutôt que de votre tête occasionner des blessures et de votre cou.
  • Page 388 être correctement attaché au moyen d'un siège de sécurité enfant. Toyota recommande vivement d'installer tous les nourrissons et enfants sur les sièges arrière du véhicule et de prévoir pour eux des systèmes de retenue adaptés.
  • Page 389 9-1. For owners ● N'utilisez aucun accessoire de AVERTISSEMENT siège recouvrant les zones de ● Ne fixez rien et ne posez rien déploiement des coussins gon- sur des emplacements tels que flables latéraux SRS et du cous- la planche de bord, la garniture sin gonflable de coussin de du volant et la partie inférieure siège SRS, car il risque de...
  • Page 390 à aucune handicap physique des modifications suivantes sans consulter votre concessionnaire Toyota. Les coussins gonflables SRS peuvent ne pas fonctionner correctement ou se déployer (se gonfler) accidentellement, provo- quant la mort ou de graves bless- ures.
  • Page 391: Index

    Index What to do if... (Trouble- shooting) ....Alphabetical Index..
  • Page 392: What To Do If

     If you lose your electronic keys, the risk of vehicle theft  Did you press the engine increases significantly. Con- switch while firmly depress- tact your Toyota dealer imme- ing the clutch pedal? diately. (P.341) (P.127)  Is the electronic key any-...
  • Page 393 What to do if... (Troubleshooting) Depending on the situation, The steering wheel can- other types of warning buzzer not be turned after the engine is stopped may also sound. (P.316, 325)  It is locked automatically to An alarm is activated and prevent theft of the vehicle.
  • Page 394 What to do if... (Troubleshooting) When a problem has occurred If you have a flat tire  Stop the vehicle in a safe place and repair the flat tire temporarily with the emer- gency tire puncture repair kit. (P.329) The vehicle becomes stuck ...
  • Page 395: Alphabetical Index

    Alphabetical Index Alphabetical Index Alarm Alarm ........65 Warning buzzer ....316 Air conditioning filter.....298 Anchor brackets ....49, 58 Automatic air conditioning sys- Antennas (smart key system)..96 tem ........214 Anti-lock Brake System (ABS) ABS (Anti-lock Brake System) ..........204 ..........204 Warning light......317 Warning light ......317 Approach warning ....183 Active Torque Split AWD system Armrest........236...
  • Page 396 Alphabetical Index Wheels and wheel ornaments ...........240 Care Clock........72, 76 Exterior....240, 246, 250 Coat hooks ......237 Interior ........243 Condenser.......272 Seat belts ......243 Consumption screen....83 Wheels and wheel ornaments Cooling system.......271 ...........240 Engine overheating .....348 Cargo capacity .......125 Cruise control ......185 Cargo hooks ......228 Cup holders......226 Chains ........
  • Page 397 Alphabetical Index Rear door child-protectors..92 If your vehicle has to be stopped Side doors ......89 in an emergency....308 Driving If your vehicle needs to be towed Break-in tips ......117 ...........311 Correct driving posture...25 If your vehicle overheats ..348 Driving mode select switch...202 Engine Procedures......
  • Page 398 Alphabetical Index If your vehicle has to be stopped Information ......359 in an emergency....308 Refueling ......145 Enhanced VSC......205 Type........354 EPS (Electric Power Steering) Warning light......318 ..........205 Fuel consumption Warning light ......318 Average fuel economy....79 Event data recorder (EDR)..8 Current fuel consumption ..79 Expert mode ......206 Fuel economy ......79 Fuel filler door...
  • Page 399 Alphabetical Index Grocery bag hooks....228 Electronic key ......86 Retaining hooks (floor mat) ..24 Engine switch .......127 Horn .........107 If the electronic key does not operate properly ....341 If you lose your keys.....341 Key number plate ....86 I/M test ........262 Keyless entry ....89, 94, 96 Identification Mechanical key.......86 Engine ........353...
  • Page 400 Alphabetical Index Rear interior lights ....223 Boost gauge ......82 Replacing light bulbs ....304 Clock ........76 Turn signal lever....133 Cruise control .......185 Vanity lights ......236 Driving support system informa- Wattage ........358 tion display .....78, 80 Lock steering column ....128 Dynamic radar cruise control180 LTA (Lane Tracing Assist)..165 Engine oil pressure gauge..81 Operation ......165...
  • Page 401 Alphabetical Index Outside rear view mirror defog- Rear Cross Traffic Alert (RCTA) gers ........217 ..........192 RCTA function ......192 Rear seats .......102 Safe Exit Assist ....198 Head restraints .....103 Outside temperature ....72 Rear side marker lights Overheating ......348 Light switch......136 Rear turn signal lights Replacing light bulbs ....304 Turn signal lever ....133 Panic mode .......88...
  • Page 402 Alphabetical Index Cleaning and maintaining the Side turn signal lights seat belt......243 Replacing light bulbs ....304 Emergency Locking Retractor 29 Turn signal lever ....133 How to wear your seat belt..28 Side windows......111 How your child should wear the Smart key system seat belt........28 Antenna location.....96 Pregnant women, proper seat...
  • Page 403 Emergency towing ....311 Light switch ......136 Towing eyelet......313 Replacing light bulbs ....304 Trailer towing ......125 Theft deterrent system Toyota Safety Sense 3.0 Alarm........65 Automatic High Beam...138 Engine immobilizer system ..64 Cruise control .......185 Tire inflation pressure....294 Dynamic radar cruise control177 Maintenance data....358...
  • Page 404 Alphabetical Index Transmission Seat belt .......319 Driving mode select switch...202 Warning lights......316 Manual transmission ....131 ABS ........317 Trip meters ........75 Brake system......316 Turn signal lights Charging system ....316 Replacing light bulbs ....304 Cruise control indicator..321 Turn signal lever....133 Driving assist information indica- tor ........321 Dynamic radar cruise control indicator......321...
  • Page 405 Alphabetical Index Windows Power windows ....111 Rear window defogger ..217 Washer .........142 Windshield wipers....142 Winter driving tips....210 Wireless charger ....231 Wireless remote control Battery-Saving Function..97 Locking/Unlocking ....87 Replacing the battery ...299 For information regarding the equipment listed below, refer to “MULTIME- DIA OWNER’S MANUAL”.
  • Page 406 Certifications Safety connect ...
  • Page 408 Smart key system ...
  • Page 411 Millimeter wave radar sensor ...
  • Page 413 Blind spot monitor ...
  • Page 414 Wireless charger ...
  • Page 417 Tire pressure warning system ...
  • Page 420 Fuel tank capacity 13.2 gal. (50.0 L, 11.0 Imp. gal.) (Reference) P.354 Fuel type Unleaded gasoline only P.359 Cold tire inflation P.358 pressure Engine oil capacity (Drain and refill  P.354 reference) Engine oil type “Toyota Genuine Motor Oil” or equivalent P.354...

Table of Contents