Saeco Royal SUP 016 User's And Maintenance Booklet page 16

77
Descaling
Move the asterisk at the end of the line to
menu item "Descaling" and select it by
means of the ENT key
The following message will be displayed:
For descaling procedure, see page 84.
Timer
The timer enables the automatic switching off of
the machine after a preset period, which can be
set from 15 minutes to 12 hours after last
dispensing. If after a few seconds coffee is
brewed again, the timer is reset. If the value set
is 0:00, the timer function is not activated and the
machine does not switch off.
Move the asterisk at the end of the line to menu
item "Timer" by means of the keys
Press ENT to select this item. The following
message will be displayed:
STANDBY
AFTER 0:00
By means of the same keys
suitable time and confirm the value through ENT
button.
When the selected time is over the following
message is displayed:
ENERGY SAVING
The machine stops and can be switched on again
by means of button "standby".
Vending functions
Royal Professional is equipped with a counter
allowing the machine statistic analysis while
detecting the different dispensing operations. It is
also equipped with another counter which is able
to stop the-dispensing operations after a certain
number. These functions are protected by a
special access code.
By means of keys move the asterisk to
item "VENDING" and select it through the
PROGRAMMING THE MACHINE
ENT key. From the displayed submenu it is
possible to select one of the following items by
means of the same keys
contrary, if the hot water selection key i: is
pressed, the submenu can be quit.
The followinq messages will be displayed:
13 DESCALING
.
Code programming
A code protects the access to the machine
counters; enter it for each programming section
and before carrying out any modification. As soon
as the code is entered, modifications can be
carried out without entering it again as long as
the programming function is enabled. The
machine is not supplied with a code. Keep to the
, select the
following indications for code programming:
By means of keys
item "VENDING" and select it through the
ENT key. The following message will be dis-
played:
Enable it through the ENT key. The following
message will be displayed:
By means of keys enter the number to be set on
the first character and confirm the selection
through the ENT key. The entered number is
saved and the cursor moves automatically to the
following character.
After having entered the complete new code, it
is necessary to save it.
The following message will be displayed:
By means of keys
. On the
1 SMALL COFFEE
TOTAL
CODE ****
HOT WATER
1 LARGE COFFEE
TOTAL
TOTAL
COUNTER
1 COFFEE TOTAL
LOCKING
COUNTER
CYCLES
move the asterisk to
16 VENDING
CODE ****
NEW CODE?
SAVE NO
the code can be saved