Table of Contents
Advertisement
6.1.4
Description of parameter view
In the parameter view, you set a value or read off the current value. Parameters are
displayed in differed ways.
● Parameters which involve the selection of one single option.
● For parameters that involve the selection of several options simultaneously,
● For parameters that involve setting of values,
● Parameters that are used to start a function.
● Parameters that are read-only
Parameters which involve the selection of several options simultaneously
With multiple selections you have the option of selecting more then one option. If no option
from the list has been selected, none of the quadrants at the left of the option will be filled.
The display has the following appearance:
SITRANS VP300 with or without HART
Operating Instructions, 03/2011, A5E01258666-03
see the following description.
see the following description.
A function can be canceled with
output in the display. The change is aborted when cancellation results from an error or by
selecting
, see also section "Error messages (Page 149)".
①
Symbol means: The write protection is activated. Symbol is always displayed if a parameter is
read-only.
. An error symbol and corresponding plain text is then
Operate
6.1 Operation overview
59
Advertisement
Table of Contents
