Epson WF-C20600 User Manual page 252

Note: If more than one optional fax board is installed on your product, the Expansion Line Settings
menu appears. You can select certain settings below for each added line.
Setting Options
Fax Speed Fast(33,600bps)
Medium(14,400bps)
Slow(9,600bps)
ECM On
Off
Dial Tone Detection On
Off
Line Type PSTN
PBX
Header Your Phone
Number
Fax Header
Receive Mode Manual
Auto
Description
Sets the speed at which you send and receive faxes.
Turns on Error Correction Mode (ECM) to
automatically correct errors in sent or received fax
data.
Turns off Error Correction Mode (ECM); color faxes
cannot be sent or received.
Automatically dials the number you enter for faxing
when the product detects a dial tone.
Turns off automatic dial tone detection, which may
be necessary if the product is connected to a PBX
(Private Branch Exchange) or a TA (Terminal
Adapter). However, turning this setting off may cause
the product to drop the first digit of a fax number.
Selects a standard phone line (Public Switched
Telephone Network).
Selects Private Branch Exchange, the type of phone
line used in office environments where an access
code such as 9 must be used to call an outside line.
Select to enter the header information and your
phone number for inclusion on outgoing faxes.
Lets you confirm whether an incoming fax should be
printed; a telephone must be connected to the
product
Automatically receives and prints faxes.
252