Fisher & Paykel OR90SDBSIX2 Care And Cleaning page 5

After cleaning slide in the shelves, making sure that:

• they are between the two wires of a shelf position; the stop notches point down;

• the guard rail is at the back.

The grill tray should be positioned between the two wires of a shelf position and orientated as shown.

Fitting and removing the sliding shelf supports

• When fitting the sliding shelf supports, make sure that you fit: the catalytic panels first. See 'Fitting the catalytic

panels' .

• the side racks

• the slides to the top wire of a shelf position

• both sides of each pair of slides

• both slides on the same level.

https://producthelp.fisherpaykel.com/nz/Cook/Freestanding_Cookers/Induction/OR90SDBSIX2/User_Guide_OR90SDBSIX2/1...

Fig. 29 Oven shelves and grill tray

Updated: Fri, 21 Aug 2020 14:54:17 GMT

Table of Contents