Table of Contents
Advertisement
ASSEMBLY
Make Assembly Easier
Everything in this manual is designed to ensure
that the weight bench can be assembled suc-
cessfully by anyone. However, it is important to
realize that the versatile weight bench has
many parts and that the assembly process will
take time. Most people find that by setting aside
plenty of time, assembly goes smoothly.
Before beginning assembly, carefully read the
following information and instructions:
• Assembly requires two people.
• Place all parts in a cleared area and remove the
packing materials. Do not dispose of the packing
materials until assembly is completed.
• Tighten all parts as you assemble them, unless
instructed to do otherwise.
1.
Before assembling the weight bench, make
sure that you have read and understand
the information in the box above.
Attach a Right Joint Plate (11) and a Left Joint
Plate (35) to an Upright (1) with two M10 x 66mm
Bolts (28) and two M10 Nylon Locknuts (31). Do
not tighten the Nylon Locknuts yet.
See the inset drawing. Repeat this step with
the other Upright (1). Make sure that the Joint
Plates (11, 35) are oriented as shown.
• As you assemble the weight bench, make sure all
parts are oriented as shown in the drawings.
• For help identifying small parts, use the Part
Identification Chart.
The following tools (not included) are required for
assembly:
• Two adjustable wrenches
• One rubber mallet
• One standard screwdriver
• One Phillips screwdriver
Assembly will be more convenient if you have a
socket set, a set of open-end or closed-end
wrenches, or a set of ratchet wrenches.
1
35
28
6
1
35
11
11
31
1
Hide quick links:
Advertisement
Table of Contents
