Mitsubishi Electric MELSEC iQ-R Series User Manual page 41

4.
Mark the checkbox of the channel where offset and gain
values are to be set.
5.
Select the voltage or current and click the [Offset
Setting] button.
6.
Apply the offset voltage or current to the terminal of the
corresponding channel, and click [Yes] button.
7.
Check that "Offset Status" has changed to "Changed",
and click [Gain Setting] button.
8.
Apply the gain voltage or current to the terminal of the
corresponding channel, and click [Yes] button.
8 OFFSET/GAIN SETTING
8.1 Setting Procedure
8
39