Mitsubishi Electric MELSEC iQ-R Series User Manual page 37

Label settings
GX Works3 provides functions that support the creation of a program.
The following table lists the module labels and global labels used for the program examples in this section.
There is no need to change the settings of the module labels. For details on the global labels, refer to the following.
 MELSEC iQ-R Programming Manual (Program Design)
Classification Label name
Module label R60AD_1.bModuleREADY
R60AD_1.bInputSignalErrorDetectionSignal
R60AD_1.bMaxValueMinValueResetCompletedFlag
R60AD_1.bA_D_conversionCompletedFlag
R60AD_1.bErrorFlag
R60AD_1.bOperatingConditionSettingRequest
R60AD_1.bMaxValueMinValueResetRequest
R60AD_1.uA_D_conversionCompletedFlag.0
R60AD_1.stnMonitor[0].wDigitalOutputValue
R60AD_1.uA_D_conversionCompletedFlag.1
R60AD_1.stnMonitor[1].wDigitalOutputValue
R60AD_1.uA_D_conversionCompletedFlag.2
R60AD_1.stnMonitor[2].wDigitalOperationValue
R60AD_1.uA_D_conversionCompletedFlag.3
R60AD_1.stnMonitor[3].wDigitalOutputValue
R60AD_1.stnMonitor[2].wMaxValue
R60AD_1.stnMonitor[2].wMinValue
R60AD_1.uWarningOutputFlagProcessAlarmUpperLimit.1
R60AD_1.uWarningOutputFlagProcessAlarmLowerLimit.1
R60AD_1.uWarningOutputFlagRateAlarmUpperLimit.0
R60AD_1.uWarningOutputFlagRateAlarmLowerLimit.0
R60AD_1.uInputSignalErrorDetectionFlag.0
Labels to be defined Define global labels as shown below:
Description
Module READY
Input signal error detection signal
Maximum value/minimum value reset
completed flag
A/D conversion completed flag
Error flag
Operating condition setting request
Maximum value/minimum value reset request
A/D conversion completed flag
CH1 Digital output value
A/D conversion completed flag
CH2 Digital output value
A/D conversion completed flag
CH3 Digital operation value
A/D conversion completed flag
CH4 Digital output value
CH3 Maximum value
CH3 Minimum value
Alert output flag (Process alarm upper limit)
Alert output flag (Process alarm lower limit)
Alert output flag (Rate alarm upper limit)
Alert output flag (Rate alarm lower limit)
Input signal error detection flag
7 OPERATION EXAMPLES
7.2 Program Examples
Device
X0
X0C
X0D
X0E
X0F
Y9
Y0D






7









35