8
OFFSET/GAIN SETTING
Using the user range setting requires setting the offset and gain values.
Access to the offset/gain setting window in the engineering tool to set the offset and gain values.
8.1
Setting Procedure
The setting procedure for the offset/gain setting of the A/D converter module is as follows:
[Tool] [Module Tool List]
8 OFFSET/GAIN SETTING
38
8.1 Setting Procedure
1.
In "Analog Input", select "Offset/gain Setting" and click
[OK] button.
2.
Select the target module for the offset/gain setting, and
click [OK] button.
3.
Click [Yes] button.