Mitsubishi Electric MELSEC iQ-R Series User Manual page 39

■Program example 4
• This program is an example to perform the processing at the time of the issuance of a rate alarm upper/lower limit alert in
CH1.
(0) At the time when a rate alarm upper limit alert is issued in CH1, the processing is to be performed.
(41)At the time when a rate alarm lower limit alert is issued in CH1, the processing is to be performed.
■Program example 5
• This program is an example to make the latest error code appear when an input signal error is detected in CH1, or an error
occurs. After this, the program clears the error flag and the stored error code.
(0) At the time when an input signal error is detected in CH1, the processing is to be performed.
(33)Error manipulation start flag is to be turned on.
7 OPERATION EXAMPLES
7.2 Program Examples
7
37