Part Identification Chart - Weider 831.15711.0 User Manual

PART IDENTIFICATION CHART

Refer to the drawings below to identify small parts used in assembly. The number in parentheses by each draw-
ing is the key number of the part, from the PART LIST on page 18. Important: Some parts may have been
pre-assembled for shipping purposes. If you cannot find a part in the parts bags, check to see if it has
been pre-assembled. If a part is missing, call 1-877-992-5999.
M10 Nylon Locknut (43)
M8 Nylon Locknut (55)
M6 Nylon Locknut (51)
M10 Washer (44)
M8 Washer (56)
M6 Washer (48)
M4 x 16mm Screw (45)
M10 x 81mm Bolt (41)
M10 x 75mm Bolt (42)
M10 x 68mm Bolt (54)
M10 x 65mm Bolt (40)
M10 x 60mm Bolt (47)
M8 x 58mm Bolt (52)
M6 x 40mm Bolt (49)
M10 x 19mm Bolt (53)
M6 x 16mm Screw (39)
5