Toyota HILUX Manual page 77

HILUX_OM_OM0K219E_(EE).book Page 77 Wednesday, May 14, 2014 3:06 PM
Installing child restraints using a seat belt (3-point type seat belt)
Rear-facing  Baby seat/child seat
■
Place the child restraint sys-
1
tem on the rear seat facing
the rear of the vehicle.
Run the seat belt through the
2
child restraint system and
insert the plate into the
buckle. Make sure that the
belt is not twisted. Keep the
lap portion of the belt tight.
Install a locking clip near the
3
plate of the lap and shoulder
belt by inserting the lap and
shoulder webbing through
the recesses of the locking
clip.
HILUX_OM_OM0K219E_(EE)
1-1. For safe use
77
1