Toyota HILUX Manual page 435

HILUX_OM_OM0K219E_(EE).book Page 435 Wednesday, May 14, 2014 3:06 PM
Replacing the following bulbs
■
If any of the lights listed below has burnt out, have it replaced by
any authorized Toyota dealer or repairer, or another duly qualified
and equipped professional.
● Side turn signal lights (mirror-mounted type) (if equipped)
● High mounted stoplight (if equipped)
■
When installing the rubber cover of the headlight
Ensure the rubber cover is securely attached.
1 Fit the rubber cover outer circumfer-
ence in firmly.
2 Fit the rubber cover around the light
bulb in until the light bulb plug can be
seen.
■
LED lights
The high mounted stoplight consists of a number of LEDs. If any of the LEDs
burn out, take your vehicle to any authorized Toyota dealer or repairer, or
another duly qualified and equipped professional to have the light replaced.
■
Condensation build-up on the inside of the lens
Temporary condensation build-up on the inside of the headlight lens does not
indicate a malfunction. Contact any authorized Toyota dealer or repairer, or
another duly qualified and equipped professional for more information in the
following situations:
●
Large drops of water have built up on the inside of the lens.
● Water has built up inside the headlight.
HILUX_OM_OM0K219E_(EE)
6-3. Do-it-yourself maintenance
435
6