Programme Play; Using The Usb - JVC UX-D750 Instruction Manual

Programme Play

You can programme up to 20 tracks to play in any desired order.
1. Make sure the disc is inserted and in STOP mode.
2. Press PROGRAM to enter the programme mode. The display will show "01 P-01".
3. Press ALBUM/PRESET / to select desired folder (for MP3 CDs or USB).
4. Press / to select the desired track number.
5. Press PROGRAM to store.
6. Repeat steps 3-5 to programme more tracks.
7. Once it is completed, press the
8. Press once to stop the programme play. Press twice to clear programme.
Open the CD tray and close it again will cancel the program and erase the memory.

Using the USB

By connecting a USB mass storage device
(including USB flash memory, USB flash players
or memory cards) to this unit, you can enjoy the
device's stored music through the unit.
1. Insert the USB device's USB plug into the
5V 500mA socket at the front of unit.
2. Turn SOURCE dial on the unit or repeatedly
press CD/USB on the remote control to
select the USB source. The word "USB" will be
showed on the display.
3. All playback features are the same as if you
were playing an MP3 CD.
• The player supports the USB music file format of MP3 only.
• If your USB device is loaded with MP3 files but the display keeps showing "READ USB", "NO MUSIC",
"NOT SUPPORT" or "NO MUSIC" on the display, the format of your USB device might not be
compatible with the unit.
• The unit can support USB devices with up to 32 GB of memory.
• The unit may not be compatible with all USB devices, this is not an indication of a problem with the
unit.
button to start programme play.
27