Lcd Display Information; Battery Charge Level/Low Battery Indication; Recharging Batteries - Topcom Twintalker 3700 DUO PACK User Manual

TOPCOM TWINTALKER 3700
10

LCD DISPLAY INFORMATION

j
i
h
g
f
e
11

BATTERY CHARGE LEVEL/LOW BATTERY INDICATION

The BATTERY CHARGE LEVEL is indicated by the number of squares present inside the BATTERY icon on the LCD
Screen.
When the BATTERY CHARGE LEVEL is low, the BATTERY icon will flash to indicate that the batteries need to be
replaced or recharged.
12

RECHARGING BATTERIES

The PMR can be used with 3 alcaline or rechargeable NiMh AAA batteries..
Only use the included AC/DC ADAPTER with "AAA" rechargeable batteries . Do not try to
charge this unit when regular "AAA" alkaline batteries are installed.
When using rechargeable batteries you can use an optional adapter to charge.
2
4
a. TX icon - Displayed when transmitting a signal
a
b. RX icon - Displayed when receiving a signal
b
c. Channel number
d. CTCSS code
e. Speaker volume indicator
c
f. Lock icon - Displayed when the keypad is locked.
g. Battery charge level indicator
d
h. VOX icon - DIsplayed in Voice controlled (Vox) mode
i. Scan icon - Displayed when scan mode is active
j. Dual Scan icon - Displayed when dual scan mode is active
Battery Full
Battery 2/3 charged
Battery 1/3 charged
Battery empty
Dispose of batteries at a designated battery disposal unit and
not in the household waste. Do not short-circuit & dispose of in
fire. Remove the batteries if this device is not going to be used
for a long period.
• Insert 3 "AAA" rechargeable batteries.
• Plug the small plug of the adapter into the SPK/MIC/CHG jack (2) and the other end in
the electrical socket.
• Make sure that the unit is switched off in order to charge the batteries properly. There is
no charge indicator during charging at OFF mode.
NOTE: It takes approximately 7 to 10 hours to fully charge the batteries.
TOPCOM TWINTALKER 3700