Toro TimeCutter ZS 4200S Operator's Manual page 10

Note:
This machine complies with the industry standard stability test in the static lateral and longitudinal tests with the maximum
recommended slope indicated on the decal. Review the instructions for operating the machine on slopes in the Operator's Manual as
well as the conditions in which you would operate the machine to determine whether you can operate the machine in the conditions on
that day and at that site. Changes in the terrain can result in a change in slope operation for the machine.
1. Warning—read the Operator's Manual.
2. Cutting/dismemberment hazard of hand, mower blade;
entanglement hazard of hand, belt—stay away from moving
parts; keep all guards and shields in place.
3. Thrown object hazard—keep bystanders away; pick up debris
before mowing; keep the deflector shield lowered.
140-2748
decal140-2748
135-3295
4. Runover hazard—do not carry passengers; look behind you
when moving in reverse.
5. Tipping hazard—when loading onto a trailer, do not use
dual ramps; only use a singular ramp wide enough for the
machine; do not use a ramp with a slope greater than 15°;
back up the ramp (in reverse) and drive forward off the ramp.
6. Tipping hazard—do not use the machine near drop-offs or
on slopes greater than 15°; only operate across slopes less
than 15°.
8
decal135-3295