Identifier
Status
WARNING:
Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your
your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Identifier
Status
Procedure
1
Slide the fan into the slots at an angle, on the system board.
2
Connect the fan cable to the system board.
3
Replace the three screws (M2x2.5) that secure the fan to the system board.
66
Replacing the graphics-card fan
GUID-E7A6C062-FC14-41CC-8C31-9E1A32C1A419
Released
Replacing the graphics-card fan
computer. After working inside your computer, follow the instructions in
GUID-B388376E-5C8B-48CA-B2C3-D82146DAED50
Released
25
After working inside
www.dell.com/