Insect Alert; Inspecting/Cleaning Burner - Weber Performer 78763 Owner's Manual

Weber gas grill owner's guide
Hide thumbs Also See for Performer 78763:
Table of Contents

Advertisement

INSECT ALERT

Your Performer Grill, as well as any outdoor gas appliance, is a target for spiders and
insects. They can nest in the venturi section (1) of the burner tube causing gas to flow
back out of the air shutter.
This could result in a fire in and around the burner tube under the bowl panel. It can
cause serious damage to your barbecue, rendering it unsafe to operate.
We strongly recommend that you inspect and clean the burner tube at least once a year,
or if any of the following symptoms occur:
1.
The smell of gas in conjunction with the burner flames appearing very yellow and
lazy.
2.
Burner makes popping noises.
Failure to correct these symptoms may result in a fire which
can cause serious bodily injury or death and cause damage
to property.
INSPECTING AND CLEANING THE BURNER
1.
Turn gas to OFF.
2.
Remove the CharBin
Storage Container.
Remove orifice clip (2) and hose fitting (3) from the burner tube.
3.
4.
Look inside the burner with a flashlight.
5.
Clean the inside of the burners with the wire matchlight holder (provided).
Use the wire to clean the air shutter area, the venturi section, and the burner slots
(4) on the inside of the bowl. Be careful when inserting the burner cleaning tool not
to damage the igniter electrode (5).
6.
Recheck with flashlight to see that there are no obstructions.
7.
If necessary, surface of hose fitting can be cleaned with a brass wire brush. The
orifice (6) can be cleaned with a small pin.
m CAUTION: Do not enlarge the orifice when cleaning.
8.
Reassemble by reversing steps 2 thru 3.
maintenanCe
m DANGER
(1)
(2)
(4)
(5)
(6)
19
(3)

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents