Table of Contents
Advertisement
KEEPING YOUR
WEBER GAS GRILL IN
TIP-TOP SHAPE
m DANGER
Failure to correct any problems described
on this page may result in a fire, which can
cause serious bodily injury or death, and
cause damage to property.
18
WWW.WEBER.COM
ANNUAL MAINTENANCE
To keep your gas grill performing as safely and efficiently
as on day one, we strongly recommend that you inspect
and clean the spider/insect screen(s) and burner tube(s)
at least once a year. Below is important information about
these two areas of the grill that should undergo annual
maintenance.
If you observe an incorrect flame pattern or blocked
burner port, proceed to the "BURNER TUBE CLEANING
OR REPLACEMENT" instructions on the following page.
BURNER FLAME PATTERN
The burner tube(s) in your gas grill was/were factory set
for the correct air and gas mixture. The correct flame
pattern is shown in illustration and described below:
Burner tube(s) (1)
•
Tips occasionally flicker yellow (2)
•
•
Light blue (3)
Dark blue (4)
•
Check burner flame pattern. If the flames do not match
the above description, it could be an indication that the
spider/insect screen(s) has/have become dirty or blocked.
WEBER SPIDER/INSECT SCREEN(S)
The combustion air opening(s) of the burner tube(s) (5)
is/are fitted with stainless steel screen(s) to help prevent
spiders and other insects from spinning webs and
building nests inside the venturi section (6) of the burner
tube(s). These nests can obstruct the normal gas flow,
and can cause gas to flow back out of the combustion
air opening(s) (7). Symptoms of this kind of obstruction
include the odour of gas in conjunction with burner
flames that appear yellow and lazy. This obstruction could
result in a fire in and around the gas valve(s), causing
serious damage to your grill (8).
NOTE: If a spider/insect screen becomes damaged or
cannot be cleaned, please contact the Customer Service
Representative in your area using the contact information on
our web site. Log onto www.weber.com.
BURNER TUBE PORTS
Over time, from repeated use of the grill, the burner
tube ports will become dirty. Blocked and dirty ports can
restrict full gas flow. Following are ways to determine
whether burner tube ports are dirty or blocked.
•
Grill does not reach desired temperature
•
Grill heats unevenly
•
One or more of the burner(s) do not ignite
1
6
5
8
2
3
4
7
Advertisement
Table of Contents
