Ricoh AP2600 Setup Manual page 44

Installing Options
M
Push in the handle of the control-
ler board until it clicks.
ZDDP280E.eps
2
N
Fasten the controller board with
the two screws to the printer.
ZDDP270E.eps
Note
If the Duplex Unit is not in-
stalled, go to step P.
34
O
While aligning the power cord to
the left side groove of the Duplex
Unit, slide it in until it is connect-
ed to the printer.
Zddx301e.eps
Zcex240j.eps
P
Plug the printer's power cord
back into the wall outlet and turn
on the power switch.