Weber Skyline 3200 Owner's Manual page 17

Step 17
Connect LP tank
WARNING; Make sure that the LP tank valve is
closed. Close by turning clockwise.
Hook the LP tank onto the fuel scale. Loosen the tank lock
wing nut. Swing the tank lock down. Tighten the wing nut.
Figure 17.
Tank lock
wing nut
Figure 17
Route the hose so it will not interfere with the scale
indicator rod.
The hose and regulator are connected in the following
manner:
Slide back the collar of the quick disconnect on the tank
valve. Push the male fitting of the regulator into the quick
disconnect, and maintain pressure. Slide the collar closed.
Figure 18 (a). Figure 18 (b) shows the quick disconnect
engaged and various components of the tank and
regulator. Regulator vent hole should be at 3, 6, or 9
o'clock. It should not be pointed up. Figure 18 (c).
(a)
Male
fitting
Hose
Regulator
Regulator
vent
17
Collar
(b)
Valve handwheel
close clockwise
Tank valve
Quick disconnect
engaged
(c)
Turn so regulator vent
does not collect water
Figure 18
Pressure
relief valve
Tank