Weber Skyline 3200 Owner's Manual page 15

Step 13
Install side burner
You will need: side burner assembly, burner grate, and
manifold bracket.
WARNING: Make sure gas supply is OFF.
Slide the side burner assembly into the open end of the
right frame. Route the side burner hose around the tank
panel so it will not interfere with scale indicator rod.
The side burner hose is connected in the following
manner:
Slide back the collar of the quick disconnect on the manifold.
Push the male fitting of the side burner hose into the quick
disconnect, and maintain pressure. Slide the collar closed.
Figure 14a. Figure 14b shows the quick disconnect
engaged.Install burner grate. Check to be sure the side
burner valve is OFF. Push side burner control knob down
and turn clockwise. Figure 14.
Figure 14
Male fitting
a)
Quick disconnect
engaged
b)
Side burner hose
Manifold side view
Manifold side view
Step 14
Install manifold bracket
You will need: manifold bracket
Hook the bracket onto the manifold at the center burner
valve. Figure 15. Place your hand underneath the bracket.
Lift the bracket, manifold and cooking box slightly as a unit
and hook onto the frame brace.
15
Manifold bracket
Frame brace
Figure 15