IBM Aptiva Hardware Handbook page 95

The following table can help you when installing adapter cards.
Table 10: Adapter card configurations
Adapter card or cards Adapter card you
currently installed: are installing:
None Plug and Play
Non–Plug and Play
Plug and Play Plug and Play
Non–Plug and Play
Non–Plug and Play Plug and Play
Non–Plug and Play
Both Plug and Play and Plug and Play
Non–Plug and Play
Non–Plug and Play
Action:
Do not change any settings.
Do not change any settings.
Do not change any settings.
Change settings in the Plug and Play Utility located in Custom Tools before
installing the card.
Change settings in the Plug and Play Utility located in Custom Tools before
installing the card.
Do not change any settings.
Do not change any settings.
Change settings in the Plug and Play Setup Utility located in Custom Tools
before installing the card.
Preparing to install adapter cards 85