Chapter 1: Setting Up And Using A Monitor; Using The Tilt/Swivel Stand - IBM Aptiva Hardware Handbook

You should have already followed the setup instructions
in the Read Me First booklet to connect the monitor to
the system unit.

Using the tilt/swivel stand

Your monitor may come with a tilt/swivel stand that lets
you adjust the screen to a comfortable viewing angle.
(Your tilt/swivel stand may come preinstalled. If it is not
preinstalled, see the installation instructions that came
with your monitor.)
Setting up and using a monitor
To use the tilt/swivel stand, grasp the monitor with both
hands and:
•
Pull downward to lower the monitor.
•
Push upward to raise the monitor.
•
Push side to side to turn the monitor.
Adjustment tips:
•
Tilt the monitor at an angle that gives you the least
reflection from lights and windows. This usually
means positioning the screen at a right angle to any
windows.
•
Position the monitor so that the top of the screen is
slightly below your eye level.
1
3