IBM Aptiva Hardware Handbook page 77

5.
The Date and Time screen looks like this:
↑ ↓ →
When you enter the time in the Configuration/Setup
Utility, use the 24-hour format. For example:
• 12 midnight is
note:
• 12 noon is
• 1:30 p.m. is
The hour setting of the Time option should be
highlighted when the Date and Time screen
appears (the hour setting is 14 in the picture). If the
00:00:00
12:00:00
13:30:00
hour setting is not highlighted, use the arrow keys
on the keyboard to highlight it.
To change the hours, press the + key to increase
the hour setting, or the – (minus) key to decrease it.
Press the right arrow key (→ → ) to move from the
6.
hour setting to the minute setting. Press the + key
to increase the minute setting, or the – key to
decrease it. (If necessary, use the same method to
change the seconds.)
On the Date and Time screen, you use the right
and left arrow keys to move from one field to
another. On other screens, you use these arrow
note:
keys to select a new setting. To determine which
keys to use on each Configuration/Setup Utility
screen, look at the bottom of each screen.
7.
After you have entered the correct time, press the
Esc key to exit the Date and Time screen.
The main menu will reappear. Press the down (↓ ↓ )
8.
arrow key until Save Settings is highlighted.
Then press Enter.
9.
From the main menu, press the Esc key to exit the
Configuration/Setup Utility.
10.
When the Exit Setup menu appears, choose Yes,
exit Setup and press Enter.
Now that you understand how to work with the
Configuration/Setup Utility, read the rest of this chapter
to learn about each of its features.
Using the Configuration/Setup Utility 67