Start And Stop The Pump - GE Peristaltic Pump P-1 Operating Instructions Manual

5 Operation

5.2 Start and stop the pump

5.2 Start and stop the pump
Follow the steps below to start and stop the pump.
Step
1
2
46
Action
Press the run/stop switch to the run position to start the pump.
The flow LED is lit.
During the run it is possible to:
Adjust the flow rate with the flow rate potentiometer.
•
Reverse the flow with the flow direction switch.
•
Press the run/stop switch to the stop position to stop the pump.
Peristaltic Pump P-1 Operating Instructions 28962201 AF