Riello 40 G3RK Installation, Use And Maintenance Instructions page 30

To remove the control-box from the burner, loosen screw (A) (see figure below) and pull towards
the arrow.
S7058
S7057
TESTING
Check the shut-down of the burner by opening the thermostats.
1544
Ignition
transformer
Photoresistance
RUN OF THE ELECTRICAL CABLE
1 - Cable gland
2 - Cable-clamp
3 - Terminal block
N - Neutral
L - Phase
- Burner-earth
- Lock-out lamp
The photoresistance is fitted directly
into the control-box (underneath the
ignition-transformer) on a plug-in sup-
port.
6
GB