Zone2 Setup - Marantz SR5015 Owner's Manual

Contents Connections

ZONE2 Setup

Makes settings for audio playback with ZONE2.
0 Values set for "Volume Limit" and "Power On Volume" are displayed according to
the setting specified for the volume "Scale". (v p. 181)
0 This can be set when "Assign Mode" is set to "ZONE2". (v p. 216)
o Lch Level
Adjust the left channel output level.
-12 dB – +12 dB (Default : 0 dB)
o Rch Level
Adjust the right channel output level.
-12 dB – +12 dB (Default : 0 dB)
Front panel Display
Playback Settings
o Volume Level
Set the volume output level.
Variable
(Default):
1 – 98
(–79 dB – 18 dB):
0 The dB value is displayed when the "Scale" setting is " –79.5 dB – 18.0 dB".
(v p. 181)
o Volume Limit
Make a setting for maximum volume.
60 – 80 (–20 dB – 0 dB)
(Default : 70 (-10 dB))
Off:
0 This can be set when "Volume Level" is set to "Variable". (v p. 239)
0 The dB value is displayed when the "Scale" setting is "-79.5 dB - 18.0 dB".
(v p. 181)
239
Rear panel
Tips
Volume can be adjusted.
Volume is fixed at the desired level. The
volume cannot be adjusting using the
remote control unit.
Do not set a maximum volume.
Remote Index
Appendix