Progressive Mode; Aspect Ratio - Marantz SR5015 Owner's Manual

Contents Connections
o Progressive Mode
Set an appropriate progressive conversion mode for the source video
signal.
Auto
(Default):
Video:
Video and Film:
0 This item can be set when "i/p Scaler" is set to anything other than "Off".
(v p. 194)
0 "Progressive Mode" can be set for devices connected to HDMI connectors 1
to 4.
Front panel Display
Playback
The video signal is automatically
detected and the appropriate mode is
set.
Select mode suitable for video playback.
Select mode suitable for video and 30-
frame film material playback.
Rear panel
Settings
o Aspect Ratio
Set the aspect ratio for the video signals output to the HDMI.
16:9
(Default):
4:3 :
0 This item can be set when "i/p Scaler" is set to anything other than "Off".
(v p. 194)
0 "Aspect Ratio" can be set for devices connected to HDMI connectors 1 to 4.
196
Remote
Tips Appendix
Output at 16:9 aspect ratio.
Output at 4:3 aspect ratio with black bars
on the sides of a 16:9 TV screen. (except
for 480p/576p output)
Index