Audyssey; Multeq Xt - Marantz SR5015 Owner's Manual

Contents Connections

Audyssey

®
Set Audyssey MultEQ XT, Audyssey Dynamic EQ
®
Dynamic Volume . These can be selected after Audyssey
®
been performed.
For additional information on Audyssey technology, please see
"Explanation of terms" (v p. 285).
0 "MultEQ ® XT", "Dynamic EQ", "Reference Level Offset" and "Dynamic Volume"
settings are stored for each input source.
0 When the sound mode is in the "Direct" or "Pure Direct" mode, "MultEQ
"Dynamic EQ" and "Dynamic Volume" settings cannot be configured.
0 When the sound mode is in "DTS Virtual:X" or sound mode that have "+Virtual:X"
in the sound mode name, "MultEQ
settings cannot be configured.
0 This item cannot be selected when a DTS:X format with a sampling frequency of
over 48 kHz is input.
Front panel Display
Playback
and Audyssey
®
Setup has
®
® XT", "Dynamic EQ" and "Dynamic Volume"
Rear panel
Settings
o MultEQ ®
MultEQ ® XT compensates for both time and frequency characteristics
of the listening area based on Audyssey
Selection is done from three types of compensation curves. We
recommend the "Reference" setting.
Reference
(Default):
L/R Bypass:
® XT",
Flat:
Off:
0 When using headphones, "MultEQ
182
Remote
Tips
XT
® Setup measurement results.
Selects the default calibrated setting with
a slight roll off at high frequencies, which
is optimized for movies.
Selects the reference setting, but
bypasses MultEQ
and right speakers.
Selects the calibrated setting which is
optimized for small rooms where your
listening position is closer to the
speakers.
Do not use "MultEQ
® XT" is automatically set to "Off".
Index
Appendix
® XT on the front left
XT".
®