Setting The Wheel So That It Turns Freely (Buggy Mode); Securing The Wheel (Walker Mode); Insert Tow Bar; Using The Pennant - QERIDOO Speedkid1 2020 User Manual

Table of Contents

Advertisement

Utilisation

Setting the wheel so that it turns freely (Buggy mode)

It must be possible for the wheel to move freely through 360 ° in order to manoeuvre in Buggy mode.
Push up the mode switch to release the wheel.
»

Securing the wheel (Walker mode)

In Walker mode, the wheel must not be at an angle to the direction of travel. You must lock the
wheel to run straight ahead in order to prevent abrupt blocking.
Push down the mode switch to make sure the wheel is running straight.
»
Turn the positioned wheel backwards until it engages audibly.
»

Insert tow bar

The tow bar can either be brought forward into the attachment position or carried along backwards
in the standby position: Pay attention also to the instructions in the chapter„Mounting the tow bar"
on page 16.
Danger!
Wrap the retaining strap of the tow bar around the tow bar several times to ensure
it does not hang down in the standby position. Otherwise it could become trapped
on obstacles.

Using the pennant

The pennant must be attached in Trailer mode, see „Inserting the pennant" on page 15. For
safety reasons, we also recommend this for the other modes.

Attaching the hand strap

In Buggy and Walker mode, the hand strap secured to the push handle must be attached to
your wrist during every journey.

Putting on the 5-point safety harness

In every mode, the 5-point safety harnesses must be properly adjusted and every child must be
fastened in, see „Middle sitting position (Speedkid2)" on page 23.

Securing the load

Loading the storage space

To open, grab the storage cover with both hands.
»
Pull the elastic band of the storage cover until it can be opened upwards over the frame.
»
Place larger items such as bags, toys or jackets in the storage. If necessary, use the extra
»
cup holder.
To close, stretch the storage cover over the frame again.
»

Using the beverage holders

Put the children's drinking bottles into the beverage holders in the cabin's foot space.
»
Danger!
When loading, pay attention to the total permissible weight and the weight limits,
see „Performance limits" on page 4.
Speedkid 2020
Subject to change without notice. – 07|2020 – 21

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Speedkid2 2020Q1-20-pQ2-20-pQ2p-20-lp

Table of Contents