Siemens SINAMICS PERFECT HARMONY GH150 Operating Instructions Manual page 126

Maintenance
9.7 Repair
9.7.10 Replacing the TP900 operator panel
To replace the operator panel, proceed as follows:
1. Disconnect the cabinet from the power supply.
2. Open the cabinet.
3. Remove the SD card from the data slot.
4. Release the cables
5. Remove the screws
6. Fit a new operator panel. Fasten the operator panel.
7. Connect the cables.
126
Figure 9-24 Remove the operator panel.
②
①
operator panel from the cabinet door towards the front.
at the operator panel.
(9 x) of the fastening clips. Remove the mounting clips. Withdraw the
SINAMICS PERFECT HARMONY GH150 6SL3825
Operating Instructions 05/2020