Customer-Replaceable Units; Crus Addressing Model 106-Drive Chassis; Model 106 Product Components For Model 106-Drive Chassis - IBM 106 Hardware Installation And Maintenance Manual

The original packaging consists of an anti-static bag for each drive, an inner carton with protective,
padded slots for each drives, and an outer carton to hold three inner cartons of drives.
3. Disconnect only the cables necessary for the equipment move and remove the enclosure from the
rack.
4. Return all components, but not the drives, to the enclosure for shipping.
Do not return the drives to the enclosure until the enclosure is at its new location and is not to be
moved again.

Customer-replaceable units

CRUs addressing Model 106-drive chassis

Table 9. Model 106 product components for Model 106-drive chassis
Item
1
2
3
4
5
6
7
8
Table 10. Part numbers of Customer-replaceable units
Part #
001LU642
001LU841
078P5611
078P5605
001LU640
Enclosure component description
Disk drive (LFF/SFF) module: DDIC (Disk in drive carrier)
1. DDIC 3.5" LFF (disks of differing type/speed and storage
capacity: SAS/SATA/SSD)
2. DDIC 2.5" SFF with adapter (disks of differing type/speed
and storage capacity: SAS/SATA/SSD)
Power supply unit (PSU) module available as AC unit (chassis
uses two PSUs of same model type)
Expansion module (EBOD canister) for storage expansion
System fan module
Controller fan module
HS Expander module (PCBA card)
Optical SAS Cable 4.3m (FRU and Production PN)
Optical SAS Cable 4.5m (FRU and Production PN)
MiniSAS HD to MiniSAS HD, L = 4.0m (COPPER) - Production
MiniSAS HD to MiniSAS HD, L = 4.0m (COPPER) - FRU
MiniSAS HD to MiniSAS HD, L = 5.0m (COPPER) - Production
MiniSAS HD to MiniSAS HD, L = 5.0m (COPPER) - FRU
AC power cord compatible with AC PSU
Part Desc
10TB 3.5 HDD
14TB 3.5 HDD
4.3M Cable (Optical SAS)
4.5M Cable (Optical SAS)
4TB 3.5 HDD
Substitute Part
Chapter 6. Troubleshooting and problem solving 63
Access
Top
Rear
Rear
Rear
Top
Top
N/A
N/A