Iom/Ebod Expander Module Detail; Power Supply Unit (Psu) Module Detail - IBM 106 Hardware Installation And Maintenance Manual

IOM/EBOD expander module
Figure 6 on page 11 shows the IOM/EBOD expander module used in either IOM/EBOD expander module
slot located on the enclosure rear panel. The module is shown resting on its base. To install the module
into one of the IOM/EBOD expander module slots located on the enclosure rear panel, you would first
revolve the module by 90º along its longitudinal axis, before inserting it into the slot, as shown in Figure 4
on page 10.
Figure 6. IOM/EBOD expander module detail
Power supply unit
Figure 7 on page 11 shows the power supply unit used in a Model 106 enclosure. The example shows a
PSU oriented for use in either PSU slot located on the enclosure rear panel.
Figure 7. Power supply unit (PSU) module detail
System fan module
Figure 8 on page 12 shows a system fan used in a Model 106 enclosure. The example shows a system
fan module oriented for use in any of the system fan slots located on the enclosure rear panel.
Chapter 3. System Overview 11