3-Inch Dome Cameras - Interlogix TruVision TVD-SNB Installation Manual

3-inch dome cameras

Use the TVD-SNB bracket with the TVD-CB3 cup base or TVD-M2-WM bracket. See "Bracket and
cup base description" on page 2 for examples of the assembled brackets.
To mount a swan-neck bracket on a wall:
1. Pull the camera cables through the TVD-SNB
bracket tube and then attach the swan-neck
bracket to the wall with the expansion screws (A)
provided.
2. Screw the cup base onto the swan-neck bracket
and fasten with the locking screw, as shown (A).
Then attach the mounting plate (B) to the cup
base.
Note: The mounting plate is shipped with the
dome camera.
3. Loosen the screws on the dome enclosure using
hex wrench, and remove the dome enclosure
and the liner.
4. Connect the cables to the dome camera.
5. Using the enclosed screws, attach the dome
module of the camera (A) to the bracket.
Then re-attach the dome liner and enclosure (B).
6. Re-attach the dome enclosure to the camera.
6 TruVision Dome Brackets Installation Manual