2-Inch Dome Wedge Cameras - Interlogix TruVision TVD-SNB Installation Manual

5. Connect the cables to the dome camera.
6. Using screws, attach the dome module to the
mounting plate.
7. Re-attach the dome liner and enclosure to the
camera.

2-inch dome wedge cameras

Use the TVD-PPB bracket and the TVD-CB2 cup base.
To mount a pendant-mount bracket on a ceiling:
1. Screw the mounting plate onto the tube and
fasten with the locking screw, as shown.
2. Pull the camera cables through the bracket tube
and then attach the bracket to the ceiling with
expansion screws.
3. Using four screws, attach the converter pan
TVD-M2 WEBM to the cup base.
Then screw the cup base onto the pendant-
mount bracket and fasten with the locking screw.
4. Loosen the screws on the dome enclosure using
the supplied hex wrench and remove it.
12 TruVision Dome Brackets Installation Manual