Pole-Mount Installation (Tvd-M-Pma) - Interlogix TruVision TVD-SNB Installation Manual

5. Using 2 screws, attach the camera base plate to
the converter pan.
6. Re-attach the camera enclosure to the camera.

Pole-mount installation (TVD-M-PMA)

Check the section "Overview: Fixed dome cameras by bracket" on page16 to confirm that the
correct bracket is used with the camera.
Use the TVD-M-PMA pole-mount adaptor to mount a camera on a pole.
To mount a swan-neck bracket on a pole:
1. At the desired mounting place, securely fasten the
TVD-M-PMA pole-mount adaptor to the pole. Pull
the cables through the mount.
2. Pull the camera cables through the TVD-SNB
bracket tube and then attach the bracket to the
pole mount with the expansion screws provided.
3. Screw the cup base onto the swan-neck bracket
and fasten with the locking screw, as shown (A).
Then attach the mounting plate (B) to the cup
base.
Note: The mounting plate is shipped with the
dome camera.
TruVision Dome Brackets Installation Manual 13