Table of Contents
Advertisement
4. Loosen the screws on the dome enclosure using
the supplied hex wrench, and remove the dome
enclosure and liner.
5. Connect the cables to the dome camera.
6. Using the enclosed screws, attach the dome
module of the camera to the bracket.
7. Re-attach the dome liner and enclosure to the
camera.
To mount a bullet camera on a pole:
1. At the desired mounting place, securely fasten the
TVD-M-PMA pole-mount adaptor to the pole. Pull
the cables through the mount.
2. Connect the cables to the camera.
3. Use the enclosed screws to attach the camera to
the pole mount.
4. Adjust the camera position and angle as required.
Specifications
SKU
TVD-SNB
TVD-PPB
TVD-M2-FM
TVD-M-PMA
TVD-M2-WEBM
TVD-M2-WM
TVD-CB5
TVD-CB5A
TVD-CB3
14
Dimensions
253 × 95 × 180 mm
Ø 150 × 537 mm
Ø 210 × 90 mm
117 × 194 × 143 mm
Ø135 × 9 mm
Ø135 × 182.5 × 251 mm
Ø 160 × 80 mm
Ø 160 × 100 mm
Ø 140 × 60 mm
Weight
490 g (1.2 lb)
1169 g (2.56 lb)
540 g (1.19 lb)
1205 g (2.66 lb)
25 g (0.05 lb)
580 g (1.28 lb)
490 g (1.2 lb)
340 g ( 0.75 lb)
320 g (0.71 lb)
TruVision Dome Brackets Installation Manual
Advertisement
Table of Contents
