Page 1
• TVD-PPB Pendant Mount • TVD-CBW Wall Mount Installing a TVD-CB2 cup base to a wedge camera When installing a TVD-CB2 cup base to a wedge camera, you require: • TVD-CB2 cup base • Wedge adapter plate, included with the wedge camera P/N 1073418-EN •...
Page 2
• Adapter plate mounting screws To mount a wedge camera to a TVD- SNB wall mount with a TVD-CB2 cup Connect the cables to the wedge base: camera. Using two screws that are Pull the camera cables through the supplied with the wedge camera, wall mount tube.
Page 3
To mount a wedge camera to TVD- wrench that is supplied with the PPB pendant mount with a TVD-CB2 camera, and remove the enclosure. cup base: Screw the pendant mounting plate onto the pendant mount pipe and tighten with the locking screw, as shown.
Page 4
Contact information For contact information go to: and manuals www.interlogix.com or www.firesecurityproducts.com To get translations for this and other product manuals go to: www.firesecurityproducts.com 4 / 4 P/N 1073418-EN • REV A • ISS 12FEB18...