Installation
Connect power to base unit/chargers
1 Plug the power adaptor into an electrical outlet not controlled by a wall switch, and the connector
• Connect the power
and telephone
2 Choose the location for your charger, and plug its power supply into an electrical outlet
line cords to the
underside of the
base as illustrated
• Plug the AC
adaptor into an
electrical outlet If
the battery has not
been charged,
place the handset
in the base or
charger, and allow
it to charge for at
least 16 hours
• Be sure to use an
electrical outlet not
controlled by a wall
switch
Connect to phone line
Plug one end of the telephone line cord into the telephone line jack at the bottom of the telephone
base Then plug the other end of the cord into the wall telephone outlet
6
into the bottom of the base unit
To telephone outlet
www vtechphones com
To power outlet