Batteries; Battery Care And Performance; Replace Handset Battery - VTech I6725 User Manual

5.8 ghz cordless telephone
Hide thumbs Also See for I6725:
Table of Contents

Advertisement

Batteries

Battery care and performance

After the battery is fully charged, you can expect the following performance:
• If you repeatedly
get a low battery
indicator, even
after charging
overnight, the
battery should be
replaced
* Handset is off the base unit or charger but not in use
• The battery needs charging when:
• To reduce the
risk of fire or
injury to persons
or damage to the
telephone, read
• Place the handset in the base so the CHARGE light turns on The battery is usually fully
and follow these
instructions
• You can keep the battery fully charged by returning the handset to the base or charger after each use
carefully
• Charge the
Replace the handset battery
battery provided
1 Remove the battery compartment cover on the handset by
or identified
for use with
this product in
2 Lift out the old battery and disconnect
accordance with
3 Align the two holes in the new battery's plug with the socket pins,
the instructions
and limitations
specified in this
4 Replace the cover by sliding it up into place
user's manual
5 The new battery must be fully charged before using the phone
28
Operation
While in use (talking)
While not in use (standby*)
— A new battery is installed in the handset
— The phone beeps twice every five seconds.
— The screen displays LOW BATTERY and the low battery icon
charged in about 16 hours
pressing on the indentation and sliding the cover downward
and snap the plug into place Snap the battery in the compartment,
as described in Installation, on page 5
Place the handset in the base or charger and allow it to charge for at
least 16 hours the first charge. The telephone might operate before
that, but for best performance, let the battery charge fully
www vtechphones com
Operating time
up to 7 hours
up to 3 days

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents