Table/Desk Installation - VTech t2415 User Manual

Installation

Table/Desk Installation

4. Charge the Handset Battery
Place the Handset in its Base. Charge the battery at least for 12 hours before using your
telephone for the first time.
5. Check for Dial Tone
After the battery is charged, pick up the Handset and press PHONE. You should hear
a dial tone.
6. Set the Dial Mode
If you have touch tone service, the phone is ready to use as soon as the battery is
charged. If you have pulse (rotary) service, you'll need to change the dial mode.
• Make sure the Handset is off. Press PROG.
• Press or until the screen displays DIAL MODE: and the current selection.
• Press SEL. The current setting blinks.
• Press or to select TONE or PULSE.
• Press SEL or PROG to save the displayed mode.
7. Set Date and Time
If you subscribe to Caller ID service, the date and time will be set automatically with the
first incoming call. If you do not have Caller ID service, you can set the date and time
manually:
• Make sure the Handset is off. Press PROG.
• Press or until DATE/TIME is displayed. Press SEL.
• The month is flashing. Press
Press SEL.
• The day is flashing. Press
Press SEL.
• The hour is flashing. Press
Press SEL.
• The minute is flashing. Press
Press SEL.
• AM or PM is flashing. Press
Press SEL.
8. Set Language
• Press PROG.
• Press or until LANGUAGE is displayed.
• Press SEL. The current setting blinks. Press
ESPANOL or FRENCH.
• Press SEL to select displayed language and exit.
or until the screen displays the correct month.
or until the screen displays the correct day.
or until the screen displays the correct hour.
or until the screen displays the correct minute.
or to choose between AM or PM.
or to displays ENGLISH,
5