VTech t2415 User Manual page 24

Cordless telephone system with caller id
Hide thumbs Also See for t2415:
Table of Contents

Advertisement

In Case of Difficulty
You hear other calls while using your phone
Disconnect your Base Unit from the telephone jack, and plug in a regular
telephone. If you still hear other calls, the problem is probably in your wiring
or local service. Call your local telephone company.
You hear noise in the Handset, and none of the keys or buttons work
Make sure the power cord is plugged in.
Common cure for electronic equipment
If the unit does not seem to be responding normally, then try putting the Handset
in the cradle. If it does not seem to respond, do the following (in the order listed):
1. Disconnect the power to the Base.
2. Disconnect the Handset battery, and spare battery pack, if applicable.
3. Wait a few minutes.
4. Connect power to the Base.
5. Re-install the battery.
6. Wait for the Handset to re-establish its link with the Base. To be safe, allow
up to one minute for this to take place.
23

Advertisement

Table of Contents
loading

Table of Contents