Table/Desk Installation; If You Subscribe To Dsl Service; Wall Mounting - VTech T2326 User Manual

Installation

Table/desk installation

1 . Plug the connector of the AC power adapter
to the jack marked AC 9V at the bottom of
the base unit . Plug the AC power adapter
into a standard electrical outlet (110V AC)
not controlled by a wall switch .
2 . Connect the telephone line cord to the jack
marked TEL LINE at the bottom of the base
unit . Plug the other end of the telephone line
cord to a wall jack .

If you subscribe to DSL service

If there is interference during telephone
conversations and/or your caller ID features
are not functioning properly, install a noise
filte� to the telephone line between the base
unit and the telephone wall jack . Contact
��ou� DSL p�o�i��e� �o� a noise filte�.

Wall mounting

1 . Connect the AC power cord and the
telephone line cord as described in the
Table/Desk Installation section above .
www.vtechphones.com
�����������������
����
�������������������
������
5